2012 Price List

2012 Price List 

Gate Valves 

Service Connection Valves 

Hydrants 

FiTTiNgS aNd valveS 

Butterfly Valves 

Novo Plug-in System 

Accessories 

Pressure Pipe Fittings • Flanged Pipes • Thrust-Resistant Joints 

Pressure Pipe Fittings with Novo Socket 

Pressure Pipe Fittings for Plastic Pipelines

2012 price list 

Notes / Pricing 

All prices in this price list supersede those in all previous price lists 

Our delivery programme of fittings, flanged pipes and valves DN 40 up to DN 1200 is contained in our catalogue „Fittings, flanged pipes and valves 

made of ductile cast iron GGG“ with the corresponding specifications. Please also observe our laying and operating instructions on the internet. 

All prices are in Euro and do not include VAT (manufacturer‘s suggested retail prices). 

Socket and Flange Connections: 

The listed prices are valid for socket fittings including the following connections: 

SMU: Screwed socket „Union“ including screw ring, EPDM rubber gasket, gliding ring 

TYT: Tyton socket including Tyton rubber gasket EPDM 

Novo: Novo socket on fittings including NOVO-SIT® ring and Tyton rubber gasket EPDM; 

Valves without NOVO-SIT® ring and Tyton rubber gasket 

STO: bolted-gland socket including bolted gland ring, rubber gasked EPDM, hammer head bolts and nuts 

KS: push-in sockets for PVC pipes including socket sealing gaskets and flanges PN 10 

as well as flanged fittings with flanges as per DIN EN 1092-2, PN 10, machined and drilled ready for use, but without flange connection. 

Flanged and double-flanged pipes cannot be cut. 

Fittings are closed in accordance with the packing guideline FGR Standard 74. 

linings and Coatings: 

Cement mortar: inside cement mortar lining, outside bituminous coating 

Epoxy: inside and outside powder epoxy coating 

Enamel: inside enamel, outside bituminous coating 

etec enamel: inside and outside enamel 

Surcharges: 

Flanged pipes and fittings with flanges PN 16, DN 200 up to DN 300 plus 10%, from DN 350 up plus 15%. 

Flanged pipes and fittings with flanges PN 25/40, DN 65 and DN 100 up to DN 1200 on request. 

Delivery is on principle ex works, excluding packing. 

For orders below 250 EUR we will invoice a surcharge of 10%. 

This price list contains only part of our delivery programme. For any fittings and valves that are not contained in this price list please ask for prices. 

Custom-made items are generally excluded from cancellation and return of goods. 

For the rest the General Delivery and Payment Terms are applied. 

The prices of fittings with cement mortar/bituminous coating or a complete bituminous coating are identical to those of fittings with 

enamel/bituminous coating. 

Our products bear the DVGW quality mark. 

We manufacture in general according to DIN EN 545/ISO 2531 series A, 

DIN 28650 or factory standard. 

Fittings with push-in sockets for PVC pipes are manufactured as per DIN 

EN 12842 or factory standard. 

We are a member of the European Association for Ductile Iron Pipe 

Systems EADIPS® (Fachgemeinschaft Guss-Rohrsysteme FGR® e.V.) 

We are a member of the German GSK Quality Association for Heavy 

Duty Corrosion Protection of Powder Coated Valves and Fittings (GSK 

Gütegemeinschaft Schwerer Korrosionsschutz von Armaturen und 

Formstücken durch Pulverbeshcichtung e.V.) 

All enamelled valves and fittings are refined in accordance with the guidelines 

of the German Enamellers‘ Association DEV (Deutscher 

Emailverband e.V.) 

Düker fittings and valves

Contents 

Notes / Pricing 2 

1. Resilient-Seated Gate Valves 

For Water 

1.1 gate valve type 4004, face-to-face dimension series 15, enamel finish 8 

1.2 gate valve type 4004, face-to-face dimension series 15, epoxy finish 9 

1.3 gate valve type 2004, face-to-face dimension series 14, enamel finish 10 


1.5 gate valve type 4004 with Pe 100 studs for welding, enamel finish 12 

1.6 Replacement and repair valve type 4004, enamel finish 

For Gas 

13 



1.9 gate valve type 4004 with Pe 100 studs for welding, epoxy finish 16 

1.10 gate valve type 3004 with welding studs for steel pipes 17 

1.11 gate valve type 3004 with blow-off pipes and steel pipe ends 18 

1.12 gate valve type 3004 with blow-off pipes and Pe ends 

For Biogas 

19 



1.15 gate valve type 4004 with Pe 100 studs for welding, epoxy finish 

For Waste Water 

22 

1.16 Waste water valve type 4004, face-to-face dimension series 15, enamel finish 23 

1.17 Waste water valve type 4004, face-to-face dimension series 15, epoxy finish 24 

1.18 Waste water valve type 2004, face-to-face dimension series 14, enamel finish 25 

1.19 Waste water valve type 2004, face-to-face dimension series 14, epoxy finish 26 

2. Service Connection Valves 

2.1 Tapping valve TOP 30 

2.2 Tapping clamp fig. 88 and 89, clapping band made of stainless steel 31 

2.3 Service connection valve type 1004, enamel finish 32 

2.4 Service connection valve type 1004, epoxy finish 33 

2.5 Service connection valve type 1004 with studs for welding, enamel finish 34 

2.6 Service connection valve type 1004 with studs for welding, epoxy finish 35 

Düker formstücke und Armaturen 

– 3 – 

2012 price list


3. Hydrants 

3.1 Underground hydrant type 304 38 

3.2 Underground hydrant type 305 with dual shut-off 39 

3.3 Pillar hydrant type 494 with additional shut-off 40 

3.4 Pillar hydrant type 495 with additional shut-off 41 

3.5 Pillar hydrant type 501 42 

3.6 Underground hydrant vd 43 

3.7 Hydrant accessories 44 

4. Butterfly Valves 

4.1 Butterfly valve type 451, enamel finish 47 

5. Novo Plug-in System 

5.1 Plug-in socket gate valve type 4004 with double-sided Novo socket 50 

5.2 Spigot socket gate valve type 4004 with Novo socket and spigot 51 

5.3 Plug-in socket butterfly valve with double-sided Novo socket 52 

5.4 Underground hydrant type 304 S 53 

5.5 Novo fittings (M, MMN / MMNR, B, Mi, iT, S, U) 56 – 60 

5.6 Pe adapter piece for Novo sockets 61 

5.7 Thrust resisting joint for cast and steel pipes – NOvO-SiT ® 62 

5.8 Thrust resisting joint for Pe pipes – NOvO-grip ® 63 

5.9 laying equipment v 300 d 64 

5.10 dismantling equipment for plug-in socket connections – NOvO-SiT ® and NOvO-grip ® 65 

6. Accessories 

6.1 Flap valves fig. 125 (flap gate) 68 

6.2 Cast iron hand wheel for gate valves, operating key 69 

6.3 Telescope stem extension set for butterfly valves 70 

6.4 Rigid stem extension set 71 

6.5 Telescope stem extension set gW 336, coupling adapter set 72 

6.6 definition pipe covering 73 

– 4 – Düker formstücke und Armaturen

7. Pressure Pipe Fittings · Flanged Pipes · Thrust-Resistant Joints 

– 5 – 


a Single socket tees with spigot and flanged branch 76 

B Single socket tees with spigot and socket branch 76 

e Flanged sockets 76 

eN Flanged socket duckfoot bends 76 

eQ Flanged socket bends 77 

eU Flanged sockets 77 

F Flanged spigots 77 – 78 

FF double-flanged pipes 78 – 84 

FFK double-flanged bends 11°– 45° 85 – 86 

FFR double-flanged tapers 87 

FFRe double-flanged tapers 88 

MK Single socket bends 11°– 45° 88 – 89 

MMa double-socket tees with flanged branch 90 – 92 

MMB double-socket tees with socket branch 92 – 94 

MMC double-socket pieces with 45° socket branch 94 

MMK double socket bends 11°– 45° 94 – 97 

MMQ double socket bends 90° 97 

MMR double socket tapers 98 

MQ Single socket bends 90° 99 

N double-flanged duckfoot bends 99 

P Plugs 99 

PX Screw plugs with threaded hole 100 

Q double-flanged bends 90° 100 

T all flanged tees 100 – 102 

TT all flanged cross tees 102 

U Collars 103 

X Blank flanges 103 

double-flanged hatchboxes 104 

Transition flange 4-/8 holes 104 

Bellmouths 104 

Screwed socket connection with düker SPeZial thrust-resistant joint 104 

Screwed socket connection with düker SMU thrust-resistant joint 104 

TYTON SiT PlUS ® , including marking ring ePdM 105 

Düker formstücke und Armaturen


8. Pressure Pipe Fittings with Novo Socket 

eN Flanged socket duckfoot bends 108 

eU Flanged sockets 108 

MK Single socket bends 11° – 45° 108 – 109 

MMa double-socket tees with flanged branch 109 – 110 

MMB double-socket tees with socket branch 110 – 111 

MMK double-socket bends 11° – 45° 112 – 113 

MMQ double-socket bends 90° 113 

MMR double-socket tapers 113 – 114 

MQ Single-socket bends 90° 114 

9. Pressure Pipe Fittings for Plastic Pipes 

e-KS Flanged sockets 116 

eN-KS Flanged socket duckfoot bends 116 

F-KS Flanged spigots 116 

MMa-KS double socket tees with flanged branch 116 – 117 

MMB-KS double socket tees with socket branch 118 

MMi-KS double sockets with internal threaded branch 118 

MMR-KS double-socket tapers 119 

General terms and conditions of delivery and payment 120 

– 6 – 

Düker formstücke und Armaturen

1. Resilient-Seated Gate Valves 

Düker valves 

– 7 – 


1. Resilient-Seated 

Gate Valves 

2. Service Connection 

Valves 

3. Hydrants 




7. Pressure Pipe Fittings 

Flanged Pressure Pipes 

Thrust-Resistant Joints 


with Novo Socket 


for Plastic Pipelines

Preisliste 2012 

düker gate valve Type 4004 

PN 10/16, diN eN 1074 part 1+2, gW 336 

Face-to-face dimension diN eN 558-1 basic series 15 

düker etec enamel finish for water 

Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and outside 

etec enamel according to the DEV-guidelines for class III soils, DIN 51178, edge protection 

for bonnet and body, A2 countersunk and sealed connecting screws, media-free stem 

bearing, rubberized wedge, EPDM gaskets and plastic parts according to KTW recommendation 

and DVGW W 270, DVGW tested and registered. 

Material 

• Body, bonnet and wedge – EN-GJS-500-7 (JS 1050) 

• Stem – X20 Cr13 

• Stem nut and clamping piece – special brass 

• Obturator – entirely vulcanized (elastomer – EPDM) 

Surface protection 

• inside and outside Düker etec enamel according to DIN 51178, 

DEV guideline class III soils 

Field of application: Drinking water up to +60 °C 

Nominal 

diameter DN 

Nominal 

pressure 

PN 

Test pressure in bar 

(water) 

Body Seat 

40 – 300 16 24 17.6 

200 – 300 10 15 11 

Item no. DN PN Price in €* 

569135 40 16 155.10 

569136 50 16 159.30 

569137 65 16 225.30 

567656 80 16 225.30 

567614 100 16 248.40 

569628 125 16 428.60 

567690 150 16 428.60 

567770 200 10 755.60 

568088 200 16 792.30 

569146 250 10 1,204.20 

570750 250 16 1,264.90 

568170 300 10 1,659.00 

569945 300 16 1,742.80 

* without operating element 

– 8 – 

Operation: 

• Hand wheel 

• Stem extension set 

• Electrical actuator 

upon request 

Düker Armaturen




düker epoxy finish for water 


epoxy blue RAL 5005 according to GSK, edge protection for bonnet and body, 

A2 countersunk and sealed connecting screws, media-free stem bearing, rubberized 

wedge, EPDM gaskets and plastic parts according to KTW recommendation and 

DVGW W 270, DVGW tested and registered. 

Material 


• Stem – X20 Cr13 




• inside and outside epoxy blue RAL 5005 according to the GSK guidelines 


Nominal 

diameter 

DN 

Düker valves 

Nominal 

pressure 

PN 


(water) 

Body Seat 

40 – 300 16 24 17.6 

200 – 300 10 15 11 


769104 40 16 144.60 

569275 50 16 147.80 

569823 65 16 207.50 

571171 80 16 207.50 

571173 100 16 230.60 

571633 125 16 398.20 

571175 150 16 398.20 

571177 200 10 698.00 

573197 200 16 731.50 

569718 250 10 1,113.00 

571178 250 16 1,169.60 

569918 300 10 1,534.30 

571179 300 16 1,611.80 


– 9 – 

Operation: 




upon request 



Gate Valves 


Valves 

3. Hydrants 

















etec enamel according to the DEV-guidelines for class III soils, DIN 51178, edge 

protection for bonnet and body, A2 countersunk and sealed connecting screws, 

media-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts according 

to KTW recommendation and DVGW W 270, DVGW tested and registered. 

Material 


• Stem – X20 Cr13 







Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


(water) 

Body Seat 

40 – 300 16 24 17.6 

200 – 300 10 15 11 


569110 40 16 150.90 

569111 50 16 154.10 

569184 65 16 218.00 

567839 80 16 218.00 

567843 100 16 244.20 

567847 125 16 423.40 

567851 150 16 423.40 

567855 200 10 729.40 

568173 200 16 765.00 

569188 250 10 1,163.30 

569203 250 16 1,219.90 

569190 300 10 1,603.40 

569410 300 16 1,683.10 


– 10 – 

Operation: 




upon request 

Düker valves




düker epoxy finish for water 


epoxy blue RAL 5005 according to GSK, edge protection for bonnet and body, A2 

countersunk and sealed connecting screws, media-free stem bearing, rubberized 

wedge, EPDM gaskets and plastic parts according to KTW recommendation and 

DVGW W 270, DVGW tested and registered. 

Material 


• Stem – X20 Cr13 






Nominal 

diameter 

DN 


570158 40 16 140.40 

569534 50 16 143.60 

570599 65 16 201.20 

570941 80 16 201.20 

570944 100 16 227.40 

571053 125 16 388.80 

570947 150 16 388.80 

571056 200 10 672.80 

571070 200 16 705.30 

570739 250 10 1,076.30 

571565 250 16 1,127.60 

569543 300 10 1,485.00 

571238 300 16 1,559.40 

Düker valves 

Nominal 

pressure 

PN 


(water) 

Body Seat 

40 – 300 16 24 17.6 

200 – 300 10 15 11 


– 11 – 

Operation: 




upon request 



Gate Valves 


Valves 

3. Hydrants 













PN 10/16, diN eN 1074 part 1+2, gW 336 with studs for welding on both sides Pe 100 



Resilient-seated gate valve with PE-HD connections according to DVGW VP 600 with 

connecting dimensions according to DIN 8074/8075, inside and outside etec enamel 

according to the DEV-guidelines for class III soils, DIN 51178, edge protection for 

bonnet and body, A2 countersunk and sealed connecting screws, media free stem 

bearing, rubberized wedge, EPDM gaskets and plastic parts according to KTW 

recommendation and DVGW W 270, DVGW tested and registered. 

Material 


• Stem – X20 Cr13 







Pipes DIN 8074, inspection report Engler-Bunte-Institute regarding connection 

technology on the basis of DVGW-VP-600, melting index group MFI 005 and 

010, according to the guidelines of the DVGW publication G 477 and bulletin 

DVS 2207 

Nominal 

diameter 

DN 

SDR 11 

Nominal 

pressure PN 

SDR Test pressure in bar 

(water) 

Body Seat 

80 – 200 10 17 15 11 

80 – 200 16 11 24 17.6 

Item no. DN d Wall thickness Price in €* 

571193 80 90 8.2 399.30 

570280 100 110 10 485.20 

570780 100 125 11.4 581.60 

768968 125 140 12.8 819.50 

570980 150 160 14.6 903.40 

571542 150 180 16.4 967.30 

768972 200 200 18.2 1,634.90 

571328 200 225 20.5 1,634.90 


– 12 – 

Upon request: 

• inside and outside Epoxy 

Operation: 



upon request 

SDR 17 


571243 80 90 5.4 399.30 

571206 100 110 6.6 485.20 

571240 100 125 7.4 581.60 

768964 125 140 8.3 819.50 

571207 150 160 9.5 903.40 

571248 150 180 10.7 967.30 

768974 200 200 11.9 1,634.90 

571319 200 225 13.4 1,634.90 

Düker valves

Düker valves 

– 13 – 


düker Replacement and Repair valve Type 4004 




Resilient-seated gate valve, flanges according to DIN EN 1092-2, etec enamel inside 

and outside according to the DEV guideline for class III soil, DIN 51178, restraint 

loose flanges with integrated gasket securing tensile strength, epoxy coating black 

RAL 9005 according to the GSK guidelines, edge protection for bonnet and body, A2 


wedge, EPDM gaskets and plastic parts in accordance with KTW recommendation 


Material 


• Stem – X20Cr13 




• Body / bonnet Düker etec enamel inside and outside according to 

DIN 51178, DEV guideline class III soils 

• Loose flanges: epoxy black RAL 9005 inside and outside according to the 

GSK guidelines 


Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


(water) 

Body Seat 

80 – 200 16 24.0 17.6 

200 10 15.0 11.0 


572329 80 16 483.10 

572330 100 16 581.60 

572331 125 16 781.80 

572332 150 16 983.00 

572333 200 10 1,494.40 

572334 200 16 1,494.40 


Upon request: 

• Flange DN 80 / DN 100 4 holes 

Operation: 



• Electrical actuator (special design) 

upon request 


Gate Valves 


Valves 

3. Hydrants 













PN 0.5/16, diN eN 13774, gW 336 


düker epoxy finish for gas 


epoxy yellow RAL 1023 according to GSK, edge protection for bonnet and body, A2 


wedge and gaskets NBR, DVGW tested and registered. 

Material 




• Obturator – entirely vulcanized (elastomer – NBR) 


• inside and outside epoxy yellow RAL 1023 according to the GSK guidelines 

Nominal 

diameter DN Nominal 

Field of application: All gases according to DVGW publication G 260/I 

pressure PN 


Body Seat PG 1 Seat 

PG 3 

4 – 16 bar 

Water Air Air 

40 – 300 0.5 / 16 24 0.5 0.5 a. 17.6 

Item no. DN PN PG Price in 

€* 

571219 40 16 PG 2 224.30 

571220 50 16 PG 2 227.40 

571222 65 16 PG 2 283.00 

769084 80 16 PG 2 283.00 

568989 100 16 PG 2 317.50 

769005 125 16 PG 2 488.40 

769085 150 16 PG 2 488.40 

769086 200 10 PG 2 781.80 

769087 200 16 PG 2 820.60 

769088 250 10 PG 2 1,283.80 

769089 250 16 PG 2 1,349.80 

769090 300 10 PG 2 1,705.10 

769092 300 16 PG 2 1,792.10 

– 14 – 

Upon request: 

• inside and outside enamel 

Operation: 




The prices for the gas valves include the inspection certificate 3.1 according to DIN EN 10204 and valve marking. 


€* 

571709 40 16 PG 3 253.60 

571037 50 16 PG 3 256.80 

572015 65 16 PG 3 315.40 

568078 80 16 PG 3 315.40 

570239 100 16 PG 3 351.10 

571670 125 16 PG 3 520.90 

568081 150 16 PG 3 520.90 

568082 200 10 PG 3 812.20 

571034 200 16 PG 3 852.00 

571487 250 10 PG 3 1,325.70 

765927 250 16 PG 3 1,391.70 

571106 300 10 PG 3 1,747.00 

572248 300 16 PG 3 1,833.00 

Düker valves


PN 0,5 / 16, diN eN 13774, gW 336 




epoxy yellow RAL 1023 according to GSK, edge protection for bonnet and body, A2 


wedge and gaskets NBR, DVGW tested and registered. 

Material 








Nominal 

diameter 

DN 

Düker valves 

Nominal 

pressure PN 


Body Seat PG 1 Seat 

PG 3 

4 – 16 bar 

Water Air Air 

40 – 300 0.5 / 16 24 0.5 0.5 a. 17.6 


€* 

769022 40 16 PG 2 215.90 

769024 50 16 PG 2 223.20 

769025 65 16 PG 2 273.50 

769027 80 16 PG 2 273.50 

769028 100 16 PG 2 308.10 

769029 125 16 PG 2 472.60 

769093 150 16 PG 2 472.60 

769030 200 10 PG 2 754.60 

769033 200 16 PG 2 793.30 

769036 250 10 PG 2 1,241.90 

769037 250 16 PG 2 1,305.80 

769039 300 10 PG 2 1,690.40 

769040 300 16 PG 2 1,732.30 


– 15 – 

Upon request: 


Operation: 






€* 

769006 40 16 PG 3 247.30 

571047 50 16 PG 3 252.60 

571679 65 16 PG 3 305.00 

571322 80 16 PG 3 305.00 

571131 100 16 PG 3 337.50 

769011 125 16 PG 3 502.00 

571072 150 16 PG 3 502.00 

571073 200 10 PG 3 785.00 

571048 200 16 PG 3 826.90 

571891 250 10 PG 3 1,282.80 

571590 250 16 PG 3 1,345.60 

572321 300 10 PG 3 1,708.20 

571887 300 16 PG 3 1,773.20 


Gate Valves 


Valves 

3. Hydrants 













PN 4, diN eN 13774, gW 336 with studs for welding on both sides Pe 100 




connecting dimensions according to DIN 8074/8075, epoxy yellow RAL 1023 inside 

and outside according to GSK, edge protection for bonnet and body, A2 countersunk 

and sealed connecting screws, media free stem bearing, rubberized wedge, gaskets 

NBR, DVGW tested and registered. 

Material 








Pipes DIN 8074, inspection report Engler-Bunte-Institute regarding 

connection technology on the basis of DVGW-VP-600, melting index group 

MFI 005 and 010, according to the guidelines of the DVGW publication 

G 477 and bulletin DVS 2207 

Nominal 

diameter DN Nominal 

pressure PN 


Body Seat 

PG 3 

0 – 4 bar 

Water Air 

80 – 200 4 11 / 17 24 0.5 a. 6 

SDR 11 


568828 80 90 8.2 487.30 

568830 100 110 10 535.50 

568832 100 125 11.4 642.40 

769041 125 140 12.8 903.40 

568850 150 160 14.6 946.30 

568835 150 180 16.4 1,069.00 

569116 200 200 18.2 1,634.90 

569118 200 225 20.5 1,634.90 


– 16 – 

Upon request: 


Operation: 




SDR 17 


568829 80 90 5.4 487.30 

568831 100 110 6.6 535.50 

568833 100 125 7.4 642.40 

569113 125 140 8.3 903.40 

568834 150 160 9.5 946.30 

569115 150 180 10.7 1,069.00 

569117 200 200 11.9 1,634.90 

568836 200 225 13.4 1,634.90 

Düker valves


PN 16, diN eN 13774, gW 336 

with studs for welding on both ends according to diN eN 12627 for steel pipes 

Face-to-face dimension diN eN 12982 basic series 15 

Polyurethane finish for gas 

Resilient-seated gate valve with studs for welding according to DIN EN 12627, 

inside Düker enamel, outside Polyurethane, A2 countersunk and sealed connecting 

screws, media-free stem bearing, rubberized wedge, gaskets NBR, 

DVGW tested and registered. 

Material 

• Body EN-GJS-400-18 (JS 1049) 

• Studs for welding ST 35.8 / P235GH 

• Bonnet, obturator EN-GJS-500-7 (JS -1050) 





• inside blue Düker enamel 

• Outside polyurethane according to DIN 30677 T 2, 15 KV-tested 


Nominal 

diameter 

DN 

Düker valves 

Nominal 

pressure 

PN 


Body Seat 

PG 3 

4 – 16 bar 

Water Air 

50 – 300 16 24 0.5 a. 17.6 

Item no. DN PN Outside pipe 

diameter 

mm 

Pipe wall 

mm 

– 17 – 

Price in €* 

569307 50 16 60.3 2.9 824.80 

572609 80 16 88.9 3.2 1,058.50 

572235 100 16 114.3 3.6 1,138.10 

572735 150 16 168.3 4 1,707.20 

572736 200 16 219.1 4.5 2,513.10 

573068 250 16 273.1 5 4,971.70 

569682 300 16 323.9 5.6 4,971.70 


The prices for the gas valves include the inspection certificate 3.1 according to 

DIN EN 10204 and valve marking. 


Upon request: 


• inside and outside epoxy yellow RAL 1023 

Operation: 




Gate Valves 


Valves 

3. Hydrants 













PN 4, diN eN 13774 

with blow-off pipes and studs for welding on both ends according to diN eN 12627 for steel pipes 


Resilient-seated gate valve with studs for welding according to 

DIN EN 12627, inside Düker enamel, outside polyurethane, A2 countersunk 

and sealed connecting screws, media free stem bearing, rubberized 

wedge, gaskets NBR, DVGW tested and registered. The welding seams 

are tested according to the AD bulletin HP5 / 3 and the weld-on ends 

according to DIN EN 12266. 

Material 

• Body EN-GJS-400-18 (JS 1049) 

• Studs for welding ST 35.8 / P235GH 

• Bonnet, obturator EN-GJS-500-7 (JS -1050) 






• Outside polyurethane according to DIN 30677 T 2. 15 KV-tested 


Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


Body Seat 

PG 3 

0 – 4 bar 

Water Air 

80 – 300 4 24 0.5 a. 6 

Item no. DN Outside pipe 

diameter 

mm 

Pipe wall PG Price in €* 

571427 80 88.9 5.6 PG3 upon request 







– 18 – 

Düker valves


PN 4, diN eN 13774 

with blow-off pipes and studs for welding on both ends Pe 100 


Resilient-seated gate valve with PE-HD connections according to DVGW VP 600 

with connecting dimensions according to DIN 8074/8075, Düker enamel on the 

inside, polyurethane on the outside, A2 countersunk and sealed connecting screws, 

media-free stem bearing, rubberized wedge, gaskets NBR, DVGW tested 

and registered. 

PE pipe end with double socket welding length. The welding seams are tested 

according to the AD bulletin HP5 / 3 and the weld-on ends according 

to DIN EN 12266. 

Material 

• Body EN-GJS-400-18 (JS 1049) 

• PE 100 stud for welding 

• Bonnet, obturator EN-GJS-500-7 (JS-1050) 


• stem nut and clamping piece – special brass 




• Outside polyurethane according to DIN 30677 T 2. 15 KV-tested 


Nominal 

diameter 

DN 

Düker valves 

Nominal 

pressure 

PN 


Body Seat 

PG 3 

0 – 4 bar 

Water Air 

100 – 200 4 11 / 17 24 0.5 a. 6 

Item no. DN Diameter PG Price in €* 

572483 100 110 PG3 upon request 






– 19 – 



Gate Valves 


Valves 

3. Hydrants 












düker gate valve Type 4004 for Biogas 

PN 10 / 16, diN eN 13774, gW 336 


düker epoxy finish 

Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and 

outside epoxy yellow RAL 1023 according to GSK, edge protection for bonnet 

and body, A2 countersunk and sealed connecting screws, media-free stem 

bearing, rubberized wedge and gaskets NBR 

Material 


• Stem – 1.4571 

• Stem nut and clamping piece – aluminium-bronze 


• gaskets NBR 



Field of application: for a maximum concentration of hydrogen sulphide of 2,000 ppm or 3,076 mg/m 3 

Medium temperature maximum 50 °C. 

Before the order we ask you to hand in a medium analysis with details on temperature, humidity and 

a possible content in solid matter 

Nominal 

diameter 

DN 

Test PG3 


please 

inquire in 

the factory 

Nominal 

pressure 

PN 


Body Seat 

PG 3 

0 – 4 bar 

Water Air 

50 – 300 4 24 0,5 a. 6 

50 16 296.00 

65 16 341.00 

80 16 341.00 

100 16 381.00 

125 16 573.00 

150 16 573.00 

200 10 908.00 

200 16 953.00 

250 10 1,477.00 

Operation: 

250 16 1,551.00 


300 10 1,960.00 


300 


16 2,057.00 


upon request 


– 20 – 

Düker valves


PN 10 / 16, diN eN 13774, gW 336 



Resilient-seated gate valve, flanges according to DIN EN 1092-2, inside and 

outside epoxy yellow RAL 1023 according to GSK, edge protection for bonnet 

and body, A2 countersunk and sealed connecting screws, media-free stem 

bearing, rubberized wedge and gaskets NBR 

Material 


• Stem – 1.4571 










Nominal 

diameter 

DN 

Düker valves 

Nominal 

pressure 

PN 


Body Seat 

PG 3 

0 – 4 bar 

Water Air 

50 – 300 4 24 0,5 a. 6 

Test PG3 


50 16 292.00 

65 16 331.00 

80 16 331.00 

100 16 368.00 

125 16 555.00 

please 

inquire in 

the factory 

150 

200 

16 

10 

555.00 

882.00 

200 16 992.00 

250 10 1,436.00 

Operation: 

250 16 1,507.00 


300 10 1,923.00 


300 


16 2,000.00 


upon request 


– 21 – 



Gate Valves 


Valves 

3. Hydrants 













PN 4, diN eN 13774, gW 336 with studs for welding on both sides Pe 100 




connecting dimensions according to DIN 8074/8075, epoxy yellow RAL 1023 inside and 

outside according to GSK, edge protection for bonnet and body, A2 countersunk and sealed 

connecting screws, media free stem bearing, rubberized wedge, gaskets NBR 

Material 


• Stem – 1.4571 











technology on the basis of DVGW-VP-600, melting index group MFI 005 and 010, 

according to the guidelines of the DVGW publication G 477 and bulletin DVS 2207. 

Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


Body Seat 

PG 3 

0 – 4 bar 

Water Air 

80 – 200 4 11 / 17 24 0,5 a. 6 

SDR 11 

Wall 

Item no. DN d thickness Price in €* 

please 

inquire in 

the factory 

80 90 8.2 511.00 

100 110 10.0 557.00 

100 125 11.4 659.00 

125 140 12.7 938.00 

150 160 14.6 979.00 

150 180 16.4 1,096.00 

200 200 18.2 1,697.00 

200 225 20.5 1,697.00 

– 22 – 

Operation: 



SDR 17 

Wall 

Item no. DN d thickness Price in €* 

please 

inquire in 

the factory 



80 90 5.4 511.00 

100 110 6.6 557.00 

100 125 7.4 659.00 

125 140 8.3 938.00 

150 160 9.5 979.00 

150 180 10.7 1,096.00 

200 200 11.9 1,697.00 

200 225 13.4 1,697.00 

Düker valves

düker Waste Water valve Type 4004 

PN 10/16, GW 336 


epoxy blue finish 




wedge, gaskets NBR. 

Material 


• Stem – 1.4571 

• Stem nut and clamping piece – aluminum bronze 




Field of application: Waste water 

Nominal 

diameter 

DN 


769097 50 16 216.90 

572431 80 16 270.40 

573113 100 16 300.80 

573114 125 16 513.50 

573115 150 16 513.50 

573054 200 10 906.50 

769044 200 16 943.20 

573102 250 10 1,445.20 

769094 250 16 1,517.50 

769095 300 10 1,992.20 

769096 300 16 2,076.10 

Düker valves 

Nominal 

pressure 

PN 


(water) 

Body Seat 

50 – 300 16 24 17.6 

200 – 300 10 15 11 


– 23 – 

Operation: 




upon request 



Gate Valves 


Valves 

3. Hydrants 













PN 10/16, GW 336 







Material 


• Stem – 1.4571 






Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


(water) 

Body Seat 

50 – 300 16 24 17.6 

200 – 300 10 15 11 


572432 50 16 201.20 

572436 80 16 249.40 

572438 100 16 278.80 

572440 125 16 477.90 

572442 150 16 477.90 

572446 200 10 837.40 

768948 200 16 878.20 

572448 250 10 1,335.20 

769102 250 16 1,403.30 

572450 300 10 1,841.30 

769103 300 16 1,934.60 


– 24 – 

Operation: 




upon request 

Düker valves


PN 10/16, GW 336 


düker enamel finish 

Resilient-seated gate valve, flanges according to DIN EN 1092-2, etec enamel inside 

and outside according to the DEV guideline for class III soil, DIN 51178, edge protection 

for bonnet and body, A2 countersunk and sealed connecting screws, media-free 

stem bearing, rubberized wedge, gaskets NBR. 

Material 


• Stem - 1.4571 







Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


(water) 

Body Seat 

50 – 300 16 24 17.6 

200 – 300 10 15 11 


769098 50 16 216.90 

573058 80 16 270.40 

769045 100 16 300.80 

769046 125 16 513.50 

769047 150 16 513.50 

573112 200 10 906.50 

769048 200 16 943.20 

573101 250 10 1,445.20 

769099 250 16 1,517.50 

769100 300 10 1,992.20 

769101 300 16 2,076.10 


Düker valves Armaturen – 25 – 

Operation: 




upon request 



Gate Valves 


Valves 

3. Hydrants 













PN 10/16, GW 336 







Material 

• Body and wedge – EN-GJS-500-7 (JS 1050) 

• Stem – 1.4571 






Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


(water) 

Body Seat 

50 – 300 16 24 17.6 

200 – 300 10 15 11 


572561 50 16 201.20 

760350 80 16 249.40 

572562 100 16 278.80 

572563 125 16 477.90 

572564 150 16 477.90 

572565 200 10 837.40 

572787 200 16 878.20 

572566 250 10 1,335.20 

769042 250 16 1,403.30 

572654 300 10 1,841.30 

769043 300 16 1,934.60 


– 26 – 

Operation: 




upon request 

Düker valves

Düker valves 

– 27 – 



Gate Valves 


Valves 

3. Hydrants 












– 28 – 

Düker valves

2. Service Connection Valves 

Düker valves 

– 29 – 



Gate Valves 


Valves 

3. Hydrants 












düker Tapping valve TOP 

PN 16, GW 336, 

for spot drilling under pressure 


for cast iron, steel and asbestos cement pipes dN 80 - 300 

• TOP tapping valve with integrated service connection valve for 

top drilling with non-return flap 

• TOP tapping valve with PE-HD connection according to 

DVGW VP 600 

• TOPsi tapping valve with integrated service connection valve for 

horizontal drilling, 12 mm stem square, all elastomers and plastic 

parts according to KTW recommendation and W 270 material 

approval, DVGW tested and registered. 

Nominal 

diameter 

DN 

Nominal 

pressure 

PN 

TOP tapping valve with internal pipe thread 


Item no. Rp Price in € 

570359 1 1 /4 300.80 

570360 1 1 /2 300.80 

570382 2 300.80 

TOP tapping valve with PE 100 SDR 11 


Item no. DN d Price in € 

570354 25 32 376.20 

570355 32 40 376.20 

570356 40 50 404.50 

570357 50 63 465.30 

PE-HD-ends laid out for two weldings 

TOPsi tapping valve with internal pipe thread for horizontal drilling 



570438 1 1 /2 228.50 


(water) 

Body Seat 

25 – 50 16 24 17.6 

– 30 – 

Material 

• Body EN-GJS-500-7 (JS 1050) 


• Bonnet, obturator – special brass 



• Düker etec enamel inside and outside 

Düker valves

düker Tapping Clamp Fig. 88 and 89 

PN 10/16 

epoxy finish 

• Tapping clamp fig. 88 with internal pipe thread for vertical and horizontal drilling 

• Tapping clamp fig. 89 with flange outlet for vertical and horizontal drilling 

Material 

• Body EN-GJS-500-7 (JS 1050) 


• inside and outside epoxy black RAL 9005 according to the GSK guidelines 


TOP tapping clamp fig. 88 

TOP tapping clamp fig. 89 


556560 Blind 35.60 

556561 1 38.80 

556562 1 1 /4 38.80 

556563 1 1 /2 39.80 

556564 2 39.80 

Clapping Band (Stainless Steel) 

for tapping valves TOP 

for tapping clamps fig. 88 and 89 

Flat clamping band matching cast iron, steel and 

cement mortar pipe as well as asbestos cement 

pipe PN 12.5. The clamps come in a set together 

with the gasket. 

Item no. DN Application Price in € 

557222 80 DI/AC 35.60 

557547 80 DICM 35.60 

557554 80 Steel 35.60 

557223 100 DI/steel/AC 36.70 

557548 100 DICM 36.70 

557575 100 Steel 36.70 

557224 125 DI 41.90 

557549 125 DICM/AC 41.90 

557555 125 Steel 41.90 

557225 150 DI/Steel 44.00 

557550 150 DICM/AC 44.00 

Düker valves 

Item no. DN Price in € 

558655 40 83.80 

558653 50 83.80 

Listed prices do not include the clapping 

bands (stainless steel). 

Upon request: 

• Tapping clamp for use with gas 

Material 

• Flat clamping band and bolts 1.4301 

• Plastic bonded flat clamping band 

• stainless steel A4 nuts – Coated sliding lacquer 

• stainless steel 1.4104 domed caps 

Item no. DN Application Price in € 

557576 150 Steel 44.00 

557511 175 DI/steel 46.10 

557226 200 DI/steel 46.10 

557551 200 DICM/AC 46.10 

557271 225 DI/steel 50.30 

557227 250 DI/steel 50.30 

557552 250 DICM/AC 50.30 

557556 300 AC 54.50 

557228 300 DI/steel 54.50 

557553 300 DICM 54.50 

– 31 – 


DI = ductile cast iron 

CM = cement mortar 

AC = asbestos cement 


Gate Valves 


Valves 

3. Hydrants 












düker Service Connection valve Type 1004 

PN 16, gW 336, diN eN 1074 part 1+2 

Face-to-face dimension diN 3202 part 4, basic series M 4 


Resilient-seated gate valve, internal stem thread with connecting dimension 

DIN 2999-1, inside and outside etec enamel according to the DEV guidelines for 

class III soils, DIN 51178, 12 mm stem square, rubberized wedge, EPDM gaskets 

as well as plastic parts according to the KTW recommendation and W 270 material 

approval, DVGW tested and registered. 

Material 

• Body EN-GJS-500-7 (JS 1050) 



• Obturator – special brass entirely vulcanized (elastomer – EPDM) 




Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


(water) 

Body Seat 

25 – 50 16 24 17.6 

Item no. DN Thread Price in € 

570109 25 1“ 196.00 

570032 32 1 1 /4“ 227.40 

570053 40 1 1 /2“ 363.70 

570082 50 2“ 379.40 

– 32 – 

Upon request: 

• inside and outside epoxy blue RAL 5005 

according to the GSK guidelines 

Operation: 



Düker valves

Düker valves 

– 33 – 



PN 4, GW 336 

Face-to-face dimension diN 3202 part 4, basic series M 4 

epoxy finish for gas 

Resilient-seated valve, internal stem thread, connecting dimension DIN 2999-1, 

epoxy yellow RAL 1023 according to GSK inside and outside, special brass stem nut, 

rubberized wedge, NBR gaskets, DVGW tested and registered. 

Material 

• Body EN-GJS-500-7 (JS 1050) 







Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


Body Seat 

PG 3 

0 – 4 bar 

Water Air 

25 – 50 4 24 0.5 and 6 


570071 25 1“ 305.00 

570038 32 1 1 /4“ 334.30 

570059 40 1 1 /2“ 468.50 

570088 50 2“ 515.60 

The prices for the gas valves include the inspection certificate 3.1 according 

to DIN EN 10204 and valve marking. 

Operation: 




Gate Valves 


Valves 

3. Hydrants 













PN 16, GW 336, 

with studs for welding on both sides Pe 100 

face-to-face dimension diN 3202 part 4, basic series M 4 



connecting dimensions according to DIN 8074/8075, etec enamel according to the 

guidelines for class III soils inside and outside, DIN 51178, 12 mm stem square, 

rubberized wedge, EPDM gaskets as well as plastic parts according to the KTW 

recommendation and W 270, DVGW tested and registered. 

Material 

• Body EN-GJS-500-7 (JS 1050) 


• Bonnet – special brass 

• Obturator – special brass, entirely vulcanized (elastomer – EPDM) 







Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


(water) 

Body Seat 

25 – 50 16 11 24 17.6 

Item no. DN d Wall thickness 

PE 100 SDR 11 

Price in € 

570001 25 32 2.9 380.40 

570026 32 40 3.7 490.50 

570052 40 50 4.6 556.50 

570081 50 63 5.8 637.20 

– 34 – 

Upon request: 

• inside and outside epoxy blue RAL 5005 

according to the GSK guidelines 

Operation: 



Düker valves

Düker valves 

– 35 – 



PN 4, GW 336, 

with studs for welding on both sides Pe 100 

face-to-face dimension diN 3202 part 4, basic series M 4 

epoxy finish for gas 


connecting dimensions according to DIN 8074/8075, epoxy yellow RAL 1023 inside 

and outside according to GSK, 12 mm stem square, rubberized wedge, NBR gaskets, 

DVGW tested and registered. 

Material 

• Body EN-GJS-500-7 (JS 1050) 





• inside and outside Epoxy yellow RAL 1023 according to the GSK guidelines 





Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


Body Seat PG 3 

0 – 4 bar 

Water Air 

25 – 50 4 11 24 0.5 and 6 

Item no. DN d Wall thickness 

PE 100 SDR 11 

The prices for the gas valves include the inspection certificate 3.1 

according to DIN EN 10204 and valve marking. 


570007 25 32 2.9 486.30 

570037 32 40 3.7 644.50 

570058 40 50 4.6 723.10 

570087 50 63 5.8 839.40 

Operation: 




Gate Valves 


Valves 

3. Hydrants 












– 36 – 

Düker valves

3. Hydrants 

Düker valves 

– 37 – 



Gate Valves 


Valves 

3. Hydrants 












düker Underground Hydrant Type 304, 

design A 

dN 80 PN 16, according to diN eN 1074-6 


Connection flange according to DIN EN 1092-2, single shut-off, fully enamelled body 

with automatic drainage and protection against pressurised water, outlet cover with 

chain, secured obturator linkage, integrated flange sealing, all elastomers and plastic 

parts according to KTW recommendation and DVGW W 270, DVGW tested and 

registered, CE approval according to DIN EN 14339. 

Material 

• Body, bonnet, DIN outlet coupling, outlet cover: EN-GJS-500-7 (JS 1050) 

• Massive obturator linkage, stem X20Cr13 

• Stem nut and bonnet nut in special brass 

• Obturator – PU elastomer 




Nominal 

diameter 

DN 

Nominal 

pressure PN 

Item no. Pipe covering 

m 


(water) 

Body Seat 

80 16 24 17.6 

PN Construction 


570137 0.8 16 flange 384.60 

570138 1 16 flange 421.30 

570139 1.25 16 flange 455.90 

570140 1.5 16 flange 576.40 

Drain stone type D made of PP see page 44 

– 38 – 

Düker valves

Düker valves 

– 39 – 


düker Underground Hydrant Type 305, design 

ad 



Connection flange according to DIN EN 1092-2, dual shut-off, fully enamelled body 

with automatic drainage and protection against pressurised water, outlet cover 

with chain, secured obturator linkage, integrated flange sealing, all elastomers and 

plastic parts according to KTW recommendation and DVGW W 270, DVGW tested 

and registered, CE approval according to DIN EN 14339. 

Material 





• Sealing ball – steel, EPDM sheathed 




Nominal 

diameter 

DN 

Nominal 

pressure PN 

Item no. Pipe covering 

m 


(water) 

Body Seat 

80 16 24 17.6 

PN Construction 


568636 0.8 16 flange 498.80 

569278 1 16 flange 536.60 

569283 1.25 16 flange 568.00 

567822 1.5 16 flange 694.80 

Drain stone type D made of PP see page 44 


Gate Valves 


Valves 

3. Hydrants 












düker Pillar Hydrant Type 494, design aUd 

dN 80 and 100, PN 16, according to diN eN 1074-6 

with additional shut-off 

düker enamel finish for water 

Connection flange according to DIN EN 1092-2, automatic drainage and protection against 

backflow and pressurised water, security lock of the internal mountings, traffic-area version 

with installation-friendly pre-determined breaking point, 2 B outlets, DN 100, optionally with 

or without A outlet, all elastomers and plastic parts according to KTW recommendation and 

DVGW W 270, DVGW tested and registered, CE approval according to DIN EN 14384. 

Material 

• Bottom, upper and lower part of the pillar EN-GJS-500-7 (JS 1050) 

• Aluminum operating cap, outlets and outlet covers 


• Stem nut, stem bearing, predetermined breaking coupling, bonnet nut special brass 

• Brass seat ring, rubberized EPDM 



• Inside: Düker enamel 

• Outside: Bottom and lower part of the pillar – base coat enamel with epoxy resin cover coat 

in RAL 3001 signal red. Upper part of the pillar – 2K-PU lacquer RAL 3001 signal red 

Field of application: Drinking water up to 60 °C 

Nominal 

diameter DN 

Item no. DN Pipe covering 

m 

558904 

80 

1.25 

558905 2 upper outlets B 1.5 

561000 

100 

1.25 

561001 2 upper outlets B 1.5 

558906 

100 

2 upper outlets B 

1.25 

558907 1 bottom outlet A 1.5 

Upon request: 


• height adjustable version 

Nominal 

pressure PN 


(water) 

Body Seat 

80 – 100 16 24 17.6 

PN Price in € 

16 2,096.00 

2,200.80 

16 2,525.70 

2,620.00 

16 2,525.70 

– 40 – 

2,620.00 

Düker valves

Düker valves 

– 41 – 


düker Pillar Hydrant Type 495, design aFUd 

dN 100 PN 16, with protective cover, 

according to diN eN 1074-6 with additional shut-off 

düker enamel finish for water 

Connection flange according to DIN EN 1092-2, automatic drainage and protection against 

backflow and pressurised water, security lock of the internal mountings, traffic-area 

version with installation-friendly pre-determined breaking point, 2 upper valve outlets B 

under the protective cover, 1 bottom outlet A, all elastomers and plastic parts according 

to KTW recommendation and W 270 material approval, DVGW tested and registered, CE 

approval according to DIN EN 14384. 

Material 

• Bottom, upper and lower part of the pillar, valve head and hand wheel 

EN-GJS-500-7 (JS 1050) 

• Aluminum outlets and outlet covers 

• Protective cover X5CrNi18-10 


• Stem nut, stem bearing, predetermined breaking coupling, 

bonnet nut special brass 

• Brass seat ring, rubberized EPDM 



• Inside: Düker enamel 

• Outside: Bottom and lower part of the pillar – base coat enamel with epoxy resin cover 

coat in RAL 3001 signal red. Upper part of the pillar – 2K-PU lacquer RAL 3001 signal red 


Nominal 

diameter 

DN 

Nominal 

pressure PN 


(water) 

Body Seat 

100 16 24 17.6 


m 


561002 100 1.25 3,573.70 

561003 100 1.5 3,668.00 

Upon request: 



Gate Valves 


Valves 

3. Hydrants 












düker Pillar Hydrant Type 501, design aUd 

Height adjustable, dN 100 PN 16, according to diN eN 1074-6 


Height adjustable lower part 1.10 – 1.60m, pipe coverings in 5 cm increments, 

connection flange according to DIN EN 1092-2, automatic drainage and protection 

against backflow and pressurised water, security lock of the internal mountings, 

flow-optimized body with improved flow rate, 2 B outlets, predetermined installationfriendly 

rated break point, infinitely adjustable 360° pivoting upper part, all elastomers 

and plastic parts according to KTW recommendation and material approval W 270. 

Material 

• Upper part, standpipe and standpipe cover in EN-GJS-500-7 (JS -1050) 

• Aluminum operating cap, outlets and outlet covers 

• Telescopic obturator linkage, stem – X20 Cr13 

• Stem nut, stem bearing, predetermined breaking coupling, bonnet nut special brass 

• Obturator – vulcanized special brass (elastomer – EPDM) 


• Upper part inside Düker enamel blue, outside Düker enamel signal red 

• Lower part: Standpipe and standpipe cover inside and outside blue Düker enamel 


Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


(water) 

Body Seat 

100 16 24 17.6 


m 


566015 100 1.25 upon request 

566014 100 1.5 upon request 

– 42 – 

Düker valves

Düker valves 

– 43 – 


düker Underground Hydrant vd, design a 

dN 80 PN 16 

For water / waste water 

The underground hydrant VD has an unrestricted pass with the nominal diameter of 

DN 80 and thus possesses an improved flow capacity. It is piggable and may be also 

used as a flushing and venting device. The variable construction allows flexibility in the 

adjustment of the pipe coverings by way of adding various flanged pipes or adjustable 

stem extension sets. 

Alternatively 

• Massive upper part with Storz coupling B / DN 75 or DIN outlet coupling 

and operating square 

• Automatic drainage or plug 

Material 

• DIN outlet coupling and plate– EN-GJS-500-7 (JS 1050) 

• Bend and flanged pipe – EN-GJS-500-7 (JS 1050) 

• Gate valve type 4004: 



• Stem nut and clamping piece – special brass /aluminum bronze 

• Obturator – entirely vulcanized (Elastomer – EPDM / Elastomer -NBR) 


• Inside and outside epoxy coating according to the GSK guidelines 

Nominal 

diameter 

DN 


Item no. Pipe covering Price in € 

570784 VD 1.00 1,522.70 

572288 VD 1.25 1,656.90 

758409 VD 1.50 1,781.60 


Item no. Pipe covering Price in € 

769201 VD 1.00 AW 1,734.40 

572831 VD 1.25 AW 1,869.60 

769202 VD 1.50 AW 1,993.30 

Upon request: 

Nominal 

pressure PN 



(water) 

Body Seat 

80 16 24 17.6 


Gate Valves 


Valves 

3. Hydrants 












Hydrant Accessories 

Item no. 

type 393 / 394 type 304 / 305 

– 44 – 

Price / Piece 

in € 

563479 570558 DIN outlet coupling with self-locking cover 187.60 

571816 

Type 100 security DIN outlet coupling lock in 

EN-GJS-500-7 fits all DIN outlet couplings 

567299 568637 Obturator linkage assembly pipe covering 0.75 / 0.80 

124.70 

567300 569281 (obturator, rod, guide piece) 

1.00 

139.40 

567301 569286 1.25 

159.30 

567302 567835 

1.50 

183.40 

569026 569419 DIN outlet coupling 

124.70 

735644 O-Ring 88-5 (DIN outlet coupling) 

6.30 

706542 O-Ring 95-7 (DIN outlet coupling) 

6.30 

772450 772451 Bonnet including O-ring 100-6 108.00 

706545 O-Ring 100-6 (bonnet) 8.40 

550556 Protective cover with chain 26.20 

566966 Orifice cover 25.20 

772885 drain stone Type D made of PP 41.70 

75.50 

Type 494 / 495 Price / Piece 

in € 

561101 Repair set for predetermined breaking point 46.10 

extension for underground hydrant 

For underground hydrant type 393/394, complete with stem and DIN outlet coupling extension made of GGG 

Item no. mm DIN outlet 

coupling extension 

price in € 

Item no. Rod extension price 

in € 

Item no. Total in € 

561032 100 61.80 561040 44.00 772473 105.80 

561034 150 79.60 561042 49.30 772474 128.90 

561036 200 93.30 561044 50.30 772475 143.60 

561038 300 131.00 561046 53.40 772476 184.40 

For underground hydrant type 304/305, complete with stem and DIN outlet coupling extension made of GGG 

Item no. mm DIN outlet 

coupling extension 

price in € 

Item no. Rod extension price 

in € 

Item no. Total in € 

570985 100 61.80 561040 44.00 772486 105.80 

570987 150 79.60 561042 49.30 772487 128.90 

570989 200 93.30 561044 50.30 772488 143.60 

570991 300 131.00 561046 53.40 772489 184.40 

Düker valves


Düker valves 

– 45 – 



Gate Valves 


Valves 

3. Hydrants 











– 46 – 

Düker Armaturen

düker Butterfly valve Type 451 

PN 10/16 diN eN 1074 part 1+2 



Resilient-seated butterfly valve, with slider crank gear and adjustable end stop, 

etec enamel inside and outside according to the DEV guidelines for class 

III soils, DIN 51178, favorable flow behavior supporting entirely enamelled 

valve disc with double eccentric shaft bearing, all elastomer and plastic parts 

according to KTW recommendation and DVGW W 270, DVGW tested and 

registered. 

Material 

• Body, valve disc, retaining ring – EN-GJS-400-15 (JS 1030) 

• Retaining ring as of DN 700 - 1.4301 

• Profile gasket - EPDM 

• Shaft X20Cr 13 

• Bearing bush – red brass Rg 7 



• Starting with DN 700 Düker enamel on the inside, 2K lacquer 

epoxy resin blue RAL 5005 on the outside 


Nominal 

diameter 

DN 

Düker valves 

Nominal 

pressure 

PN 


(water) 

Body Seat 

200 – 1200 10 15 11 

100 – 1200 16 24 17.6 

w/out accessories with hand wheel 

DN PN Item no. Price in € Item no. Price in € 

100 16 572653 1,666.30 565275 1,712.40 

125 16 571216 1,856.00 567539 1,902.10 

150 16 566120 1,856.00 565513 1,902.10 

200 10 566122 2,133.70 566224 2,179.80 

200 16 566121 2,248.00 565924 2,294.10 

250 10 569436 2,445.00 566226 2,491.10 

250 16 569023 2,727.90 567630 2,774.10 

300 10 569024 3,199.50 566517 3,246.70 

300 16 569589 3,540.10 567633 3,586.30 

350 10 569991 3,745.60 571588 3,791.70 

350 16 571546 4,480.20 571128 4,526.30 

400 10 569456 4,218.20 567226 4,264.30 

400 16 569793 5,053.50 569759 5,099.60 

500 10 569457 5,373.10 570518 5,470.60 

Note: 

We deliver the following style butterfly valves 

upon request: 

• Long design according to DIN EN 558-1, 

basic series 15 with and without by-pass 

• Pressure rating PN 25 from DN 100 to 600 

• Pressure rating PN 25 between DN 700 and 

1200 on request 

– 47 – 

Operation: 



• Electrical actuator1 • Pneumatic drive1 • Hydraulic drive1 1 special design 

upon request 


w/out accessories with hand wheel 

DN PN Item no. Price in € Item no. Price in € 

500 16 570207 6,844.50 571484 6,940.90 

600 10 569968 7,077.10 573069 7,173.60 

600 16 570562 9,229.70 568947 9,338.70 

700 10 561538 11,143.40 553911 11,252.40 

700 16 573158 14,831.30 572079 14,877.40 

800 10 561867 14,027.50 561174 14,136.50 

800 16 571239 18,368.30 561175 18,414.40 

900 10 572019 19,757.90 573161 19,804.10 

900 16 573153 26,676.80 573162 26,774.30 

1000 10 561871 21,409.60 561379 21,506.00 

1000 16 568678 28,867.20 573163 28,963.60 

1200 10 573157 33,124.10 569451 33,341.10 

1200 16 573159 49,965.50 573164 50,063.00 


Gate Valves 


Valves 

3. Hydrants 











– 48 – 

Düker Armaturen


Düker valves 

– 49 – 



Gate Valves 


Valves 

3. Hydrants 












düker Plug-in Socket gate valve Novo Type 4004 

PN 16, diN eN 1074 part 1 + 2, gW 336 



Resilient-seated gate valve with double-chamber socket for the tensile strength ensuring 

connection to cast, steel and PE pipes, two-sided plug-in socket according to 

DIN 28603 TYTON ® with pre-chamber, etec enamel inside and outside according to 

the DEV guidelines for class III soils, DIN 51178, edge protection for bonnet and body, 

A2 countersunk and sealed connecting screws, media-free stem bearing, rubberized 

wedge, EPDM gaskets and plastic parts in accordance with KTW recommendation 


Material 

• Body, bonnet and obturator – EN-GJS-500-7 (JS 1050) 





• Inside and outside Düker etec enamel according to DIN 51178, 



Nominal 

diameter 

DN 

Nominal 

pressure 

PN 

Item no. DN Price in €* 

567899 80 236.80 

567903 100 261.00 

570607 125 449.60 

567911 150 449.60 

567915 200 832.10 

568174 250 1,327.80 

568182 300 1,829.80 


(water) 

Body Seat 

80 – 300 16 24 17.6 


listed prices do not include the connections. 

Operation: 




upon request 

– 50 – 

Düker Düker Armaturen valves

Düker valves 

– 51 – 


düker Spigot Socket gate valve Novo Type 4004 

PN 16, diN eN 1074 part 1 + 2, gW 336 



Resilient-seated gate valve with double-chamber socket for tensile strength ensuring 

connection to cast steel and PE pipes, plug-in socket according to DIN EN 28603 

TYTON ® with pre-chamber, spigot according to 545, inside and outside etec enamel 

according to the DEV guideline for class III soil. DIN 51178 edge protection for bonnet 

and body, A2 countersunk and sealed connecting screws, media-free stem bearing, 

rubberized wedge, EPDM gaskets and plastic parts in accordance with KTW recommendation 


Material 






• Inside and outside Düker etec enamel according to DIN 51178, 



Nominal 

diameter 

DN 

Nominal 

pressure 

PN 

Item no. DN Price in €* 

567919 80 236.80 

567923 100 261.00 

569643 125 449.60 

567931 150 449.60 

567935 200 832.10 

568186 250 1,327.80 

569171 300 1,829.80 


(water) 

Body Seat 

80 – 300 16 24 17.6 



Operation: 




upon request 


Gate Valves 


Valves 

3. Hydrants 












düker Plug-in Socket Butterfly valve Novo 

PN 10/16 diN eN 1074 part 1+2 



Resilient-seated butterfly valve, with slider crank gear and adjustable end stop, with 

double-chamber socket for tensile strength ensuring connection to cast, steel and PE 

pipes, double-sided plug-in socket according to DIN 28603 TYTON ® with pre-chamber, 

etec enamel inside and outside according to the DEV guidelines for class III soils, 

DIN 51178, favorable flow behavior supporting entirely enamelled valve disc with 

double eccentric shaft bearing, all elastomer and plastic parts according to KTW 

recommendation and DVGW W 270, DVGW tested and registered. 

Material 

• Body, valve disc, clamping ring – EN-GJS-400-15 (JS 1030) 

• Profile gasket – EPDM 

• Shaft X20Cr 13 

• Bearing shafts – red brass Rg 7 




Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


(water) 

Body Seat 

200 – 500 10 15 11.0 

150 – 500 16 24 17.6 

Item no. DN PN Gearbox Price in € 

565112 150 16 SK I 2,919.70 

873331 200 10 SK I A 3,354.60 

873331 200 16 SK I A 3,354.60 

573167 250 10 SK I A 3,634.50 

565507 250 16 SK II A 4,264.30 

565509 300 16 SK II A 5,033.50 

571937 400 10 SK II A 6,424.20 

569976 400 16 SK III 7,053.00 

573173 500 16 SK III 8,444.80 

Listed prices do not include the connections. Slider crank gear with free shaft end. 

– 52 – 

Operation: 


Düker valves

düker Underground Hydrant Type 304 S, 

design A 



Spigot end as per DIN EN 545, single shut-off, fully enamelled body with automatic 

drainage and protection against pressurised water, outlet cover with chain, secured 

obturator linkage, all elastomers and plastic parts according to KTW recommendations 


Material 








Nominal 

diameter 

DN 

Düker valves 

Nominal 

pressure PN 


(water) 

Body Seat 

80 16 24 17.6 

Item no. 

Pipe 

covering m 

H PN Construcion Price in € 

569124 0.75 670 16 spigot end 654.00 

565848 1 890 16 spigot end 679.10 

569126 1.25 1140 16 spigot end 695.90 

569127 1.5 1390 16 spigot end 868.80 

– 53 – 



Gate Valves 


Valves 

3. Hydrants 












düker Pipe Section with Novo Socket Type M 

PN 10/16, for water 

Socket pipe with double-chamber socket for tensile strength ensuring connection 

to cast steel and PE pipes, plug-in socket according to DIN 28603 TYTON ® with 

pre-chamber, spigot according to DIN EN 545. Also suitable as hydrant extension. 

Material 

• EN-GJS-500-7 


• Inside Düker enamel according to DIN 51178 

• Outside bitumen coating 


Item no. DN Face-To-Face 

dimension 


552512 80 150 144.60 

552515 80 200 152.00 

552518 80 300 175.00 

862522 100 400 202.30 

862524 150 400 279.80 

862526 200 400 525.00 

Listed prices do not include the connections. 

Upon request: 


• Inside and outside epoxy blue RAL 5005 according to GSK 

– 54 – 

Düker valves

düker Hydrant duck-foot Bend with 

Novo Sockets Type MMN and MMNR 

PN 10/16 for water according to diN eN 545 

Double-socket duckfoot bends with double-chamber sockets according to DIN 28603 

TYTON ® with pre-chamber. For installation of plug-in hydrants. 

Material 

• EN-GJS-500-7 


• inside Düker enamel according to DIN 51178 

• outside bitumen coating 


Double-socket duckfoot bend 


864212 80 w/out 208.60 

864211 80 2 x 1 1 /2" 241.00 

864377 80 2 x 2" 248.40 

Reduced double-socket duckfoot bend 


864494 100 / 80 256.80 

864491 150 / 80 451.70 

864496 200 / 80 750.40 


Upon request: 



• With two lateral, internal pipe thread outlets 

Düker valves 

– 55 – 



Gate Valves 


Valves 

3. Hydrants 












düker long Socket Tee with 

Socket Branch Type B 


Long single-socket tee with socket branch, with double-chamber socket NOVO in the 

passage, double-chamber socket NOVO in the centered branch, plug-in socket according 

to DIN 28603 TYTON ® with pre-chamber, spigot in the passage according to DIN 

EN 545. For the installation of plug-in hydrants. 

Material 

• EN-GJS-500-7 





Item no. DN1 Price in € 

864796 100 / 80 496.80 

864800 150 / 80 637.20 

864806 200 / 80 1,124.50 


Upon request: 


• Inside and outside epoxy blue RAL 5005 

according to GSK 

– 56 – 

Düker valves

düker all Spigot Tee with 

Novo Socket Type Mi 


single-socket tee with spigot branch with one Novo double-chamber socket in the 

passage, plug-in socket according to DIN 28603 TYTON ® with pre-chamber, spigot in 

the passage and outlet according to DIN EN 545. 

Material 

• EN-GJS-500-7 


Item no. DN1 DN2 Price in € 

862449 80 80 240.00 

862451 100 80 256.80 

862458 100 100 271.40 

862460 125 80 312.30 

862467 125 100 312.30 

862462 125 125 312.30 

862465 150 80 378.30 

862466 150 100 378.30 

862472 150 125 378.30 

862474 150 150 378.30 

862481 200 80 526.10 

862478 200 100 526.10 

862479 200 125 526.10 

862488 200 150 526.10 

862480 200 200 526.10 

862497 250 80 upon request 

862494 250 100 upon request 

877045 250 150 upon request 

703199 250 200 upon request 

862489 250 250 upon request 


862490 300 100 upon request 

862491 300 150 upon request 

862492 300 200 upon request 

862487 300 300 upon request 

862858 400 300 upon request 


Düker valves 




– 57 – 

Upon request: 






Gate Valves 


Valves 

3. Hydrants 












düker all Spigot Tee Type iT 


All spigot tee with spigot ends according to DIN EN 545 

for the installation of gate valves with plug-in socket. 

Material 

• EN-GJS-500-7 


Item no. DN1 DN2 Price in € 

863417 80 80 234.80 

863418 100 80 266.20 

863419 100 100 268.30 

863427 125 80 338.50 

863428 125 100 338.50 

863429 125 125 338.50 

863430 150 80 408.70 

863431 150 100 414.00 

863432 150 125 418.20 

863433 150 150 418.20 

863434 200 80 596.30 

863435 200 100 602.60 

863464 200 125 612.00 

863466 200 150 612.00 

863468 200 200 617.30 

877336 250 80 1,315.20 

863866 250 100 1,315.20 

769150 250 125 1,331.00 

863867 250 150 1,331.00 

863868 250 200 1,382.30 

863471 250 250 upon request 


863472 300 100 upon request 

769151 300 125 upon request 

863473 300 150 1,507.00 

863474 300 200 1,522.70 

863477 300 250 upon request 

863482 300 300 1,617.10 

863939 400 250 upon request 

864192 400 300 upon request 

863938 400 400 upon request 




– 58 – 

Upon request: 




Düker valves

düker Novo Fitting Type S 

PN 10/16, face-to-face dimension 800 mm for water 

Smooth pipe with spigots according to DIN EN 545. 

Material 

• EN-GJS-500-7 






864203 80 228.50 

864204 100 283.00 

864205 150 393.00 

864206 200 478.90 

Upon request: 



Düker valves 

– 59 – 



Gate Valves 


Valves 

3. Hydrants 












düker Novo Collar Type U 

PN 10/16 for water according to diN eN 545 

Collar with double-chamber sockets on both sides, plug-in sockets 

according to DIN 28603 TYTON ® with pre-chamber. 

Material 

• EN-GJS-500-7 





Item no. DN Socket Price in € 

864011 80 NO / NO 224.30 

864015 100 NO / NO 231.60 

864024 150 NO / NO 344.80 

864127 80 SM / NO 224.30 

864090 100 SM / NO 231.60 

864091 150 SM / NO 344.80 


Upon request: 



– 60 – 

Düker valves

düker Pe adapter Piece for Novo Sockets 

PN 10/16, for water, cast iron on Pe 

Connector ensuring tensile strength for fittings, gate valves 

and butterfly valves for plug-in sockets NOvO-SiT ® 

PE adapter piece with factory-mounted support sleeve, circumferential 

retaining ring for holding the locking segments, PE spigot for all common 

welding methods SDR 11. 

Material 

• Fitting made of PE 100 black 

• Support sleeve and retaining ring made of stainless steel 

Item no. 

PE 100 

Düker valves 

DN Diameter Wall- Price in € 

thickness 

557807 80 90 8.2 226.40 

557808 100 110 10 286.10 

557809 100 125 11.4 344.80 

557810 125 140 12.8 393.00 

557811 150 160 14.6 459.00 

557859 150 180 16.4 478.90 

557860 200 200 18.2 478.90 

557861 200 225 20.5 478.90 

– 61 – 



Gate Valves 


Valves 

3. Hydrants 












düker Thrust Resisting Joint System NOvO-SiT ® 

For cast and steel pipes, PN 10/16/25, for water 

cast iron restraint connection according to diN eN 545 

Internal thrust resisting joint for the plug-in socket connection for cast iron and 

steel pipe consisting of: TYTON ® -gasket and NOVO-SIT ® ring with vulcanized 

metal segments, elastomers EPDM, according to the KTW-recommendation and 

material approval W 270. 

Material 

• TYTON ® gasket-EPDM 

• Thrust resisting joint ring – EPDM 

• Stainless steel segments 


874590 80 28.90 

874591 100 34.60 

874593 125 40.70 

874595 150 52.10 

874597 200 72.30 

874599 250 95.50 

874601 300 134.20 

– 62 – 

Düker valves

düker Thrust Resisting 

Joint System NOvO-grip ® III 

for Pe pipes PN 10/16 for water, 

restraint connection 

Internal thrust resisting joint for the plug-in socket connection for PE pipe consisting 

of: GKS gasket and NOVO-Grip ® III ring, elastomers and plastic parts according to KTW 

recommendation and material approval W 270. 

Material 

• GKS gasket- EPDM 

• Thrust resisting joint locking ring – POM 

Item no. DN Diameter Price in € 

754347 80 90 46.10 

754348 100 110 53.40 

757773 125 140 58.70 

754349 150 160 67.10 

754350 200 225 110.00 

Note: 

A support sleeve is required for the installation of a NOVO-Grip ® connection. 

Stainless steel support sleeve for the use with PE 100 

Item no. Dimensions 

d 


90 x 8.2 upon request 

110 x 10 upon request 



Düker valves 

– 63 – 



Gate Valves 


Valves 

3. Hydrants 












düker laying equipment v 300 d 

for pipes, fittings and valves 

All-purpose laying equipment V 300 D for the installation of cast iron and PE pipes, 

fittings and valves for plug-in sockets according to DIN 28603 TYTON ® and DIN 28603 

TYTON ® with Novo pre-chamber. Set includes: 1 clamp with crank pin (on the pipe) 

1 clamp for the tension rods (on the sockets), 2 lever rods. 


555471 80 976.70 

552965 100 1,029.10 

555483 125 1,101.40 

553372 150 1,117.20 

554077 200 1,187.40 

555491 250 1,220.90 

557107 300 1,311.00 

Note: 

Please specify pipe type when placing an order. 

– 64 – 

Düker valves

Plug-in Sockets dismantling equipment 

Unlocking plates – reusable for the dismantling of SIT ® and GRIP ® connections 

Unlocking plates 

Item no. price/item 

in € 

570235 4.30 

Unlocking plates > DN 300 upon request. 

Number of unlocking devices needed 

Düker valves 

DN price per set 

80 4 

100 4 

125 5 

150 6 

200 8 

250 10 

300 12 

400 16 

500 19 

Striking members 

Reusable striking members for holding the 

unlocking plates 

Item no. DN price/item 

in € 

570232 80 – 100 55.70 

570233 125 – 150 55.70 

570234 200 – 300 55.70 

Unlocking devices for plug-in hydrants DN 80 

Item no. DN price/item 

in € 

561419 80 36.70 

Set: 3 pieces (required) 

– 65 – 



Gate Valves 


Valves 

3. Hydrants 












– 66 – 

Düker valves


Düker valves 

– 67 – 



Gate Valves 


Valves 

3. Hydrants 












düker Flap valves Fig. 125 

PN 10/16, with flange 

epoxy finish for water 

Material 

• Body and cover in EN-GJS-500-7 (JS 1050) 

• Brass flap shaft 

• Elastomer flap sealing 


• inside and outside epoxy black RAL 9005 according to the GSK guidelines 

Fig. 125 with flange connection 


Nominal 

diameter 

DN 

Nominal 

pressure 

PN 


(water) 

Body Seat 

200 – 400 10 15 11.0 

50 – 400 16 24 17.6 

Item no. DN PN Face-to-face 

dimension 

standard 


579504 50 16 210 131.00 

579508 65 16 210 131.00 

579512 80 16 210 141.50 

579516 100 16 250 153.00 

579520 125 16 250 315.40 

579524 150 16 280 315.40 

579528 200 10 300 381.50 

579529 200 16 300 381.50 

579532 250 10 350 496.80 

571057 250 16 350 496.80 

579536 300 10 360 813.20 

572324 300 16 360 813.20 

579537 350 10 390 1,139.20 

769049 350 16 390 1,139.20 

579538 400 10 390 1,466.20 

571162 400 16 390 1,466.20 

– 68 – 

Düker Armaturen

Cast iron Hand Wheel diN 3220 

for Gate Valves 

Material black varnished gg20 

Item no. DN SW Diameter Price in € 

769541 40 / 50 14 /17 200 29.30 

769578 65 / 80 17 /19 250 31.40 

769539 100 – 150 19 /22 315 37.70 

769538 175 / 200 24 /27 400 59.70 

769582 250 / 300 27 /32 500 148.80 

Operating Keys 

diN 3223 a, B, C, e 

Item no. DIN 3223 Length x 

Width 

Düker valves 

– 69 – 


769159 form A Pillar hydrant small 26.20 

769161 form B Pillar hydrant large 125.80 

769162 form C Underground hydrants 

and valves 

1100 x 420 58.70 

769165 form E Tapping valves 750 x 320 51.40 

769166 form E Tapping valves 1000 x 320 37.70 

Additional operating keys upon request. 



Gate Valves 


Valves 

3. Hydrants 












düker Telescope Stem extension set 

for Butterfly Valves 

Material 

• Square cap GJS400-15 galvanized 

• Obturator linkage S235JR hot zinc dipped 

• Coupling adapter GJS-400-15 galvanized 

• Aluminum position indicator 

• Centering cap PA 

• Protection tube PE-HD 

• Socket adapter with additional hole PE 

• Adapter disc EPDM 

Item no. Valve Type Pipe covering 

(Rd) approx. 

– 70 – 

Length GL 

obturator 

linkage* 


769209 DN 

1.00 – 1.50 m 0.76 – 1.36 m 161.40 

769237 

769240 

100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600 

PN 10 

– 

without 

position indicator 

20 mm shaft 

1.20 – 1.80 m 

1.70 – 2.70 m 

0.91 – 1.60 m 

1.36 – 2.46 m 

181.30 

223.20 

769241 DN 

100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 

2.50 – 3.20 m 2.16 – 3.26 m 265.10 

769208 

PN 16 

1.00 – 1.50 m 0.76 – 1.36 m 607.90 

769213 

769214 

769215 

– 

DN 

100, 125, 150, 200, 250, 300, 350, 400, 450, 

PN 25 

with 


up to 47 rev./lifting 

20 mm shaft 

1.20 – 1.80 m 

1.70 – 2.70 m 

2.50 – 3.20 m 

0.91 – 1.60 m 

1.36 – 2.46 m 

2.16 – 3.26 m 

627.80 

669.70 

711.60 

769209 DN 

1.00 – 1.50 m 0.76 – 1.36 m 161.40 

769237 

769240 

800, 900, 1000, 1200 

PN 10 

– 

without 


20 mm shaft 

1.20 – 1.80 m 

1.70 – 2.70 m 

0.91 – 1.60 m 

1.36 – 2.46 m 

181.30 

223.20 

769241 DN 

700, 800, 900, 1000 

2.50 – 3.20 m 2.16 – 3.26 m 265.10 

769216 

PN 16 

1.00 – 1.50 m 0.76 – 1.36 m 607.90 

769220 

769221 

769222 

– 

DN 

600, 700, 800, 1000 

PN 25 

with 



20 mm shaft 

1.20 – 1.80 m 

1.70 – 2.70 m 

2.50 – 3.20 m 

0.91 – 1.60 m 

1.36 – 2.46 m 

2.16 – 3.26 m 

627.80 

669.70 

711.60 

769242 DN 

1.00 – 1.50 m 0.76 – 1.36 m 161.40 

769243 

769244 

700 

PN 10 

– 

without 


30 mm shaft 

1.20 – 1.80 m 

1.70 – 2.70 m 

0.91 – 1.60 m 

1.36 – 2.46 m 

181.30 

223.20 

769245 DN 

600 

2.50 – 3.20 m 2.16 – 3.26 m 265.10 

769223 

PN 16 

1.00 – 1.50 m 0.76 – 1.36 m 607.90 

769224 

769225 

769226 

– 

DN 

500 

PN 25 

with 



30 mm shaft 

1.20 – 1.80 m 

1.70 – 2.70 m 

2.50 – 3.20 m 

0.91 – 1.60 m 

1.36 – 2.46 m 

2.16 – 3.26 m 

627.80 

669.70 

711.60 

*Definition of pipe covering see page 73. 

Düker Armaturen

Rigid Stem extension set 

Item no. Valve Pipe covering 

(Rd) approx. 

769513 

Düker valves 

Length GL 

Obturator 

linkage * 

– 71 – 


0.75 m 0.49 m 17.90 

769512 

769514 

Service connection 

valve 

1.00 m 

1.25 m 

0.74 m 

0.99 m 

17.90 

19.10 

769519 

(SW12) 

1.50 m 1.18 m 21.00 

769515 2.00 m 1.74 m 25.70 

769448 0.75 m 0.45 m 35.60 

769253 Gate valve 1.00 m 0.70 m 35.60 

769144 

DN 40/50 

1.25 m 0.95 m 37.30 

769258 (SW14) 1.50 m 1.20 m 38.60 

769449 2.00 m 1.70 m 44.70 

769482 0.75 m 0.41 m 40.10 

769483 Gate valve 1.00 m 0.66 m 40.10 

769484 

DN 65 / 80 

1.25 m 0.91 m 42.50 

769486 (SW17) 1.50 m 1.16 m 47.10 

769487 2.00 m 1.66 m 53.20 

769452 0.75 m 0.31 m 42.30 

769255 Gate valve 1.00 m 0.56 m 42.30 

769146 

DN 100 – 150 

1.25 m 0.81 m 44.10 

769260 (SW19) 1.50 m 1.06 m 49.50 

769453 2.00 m 1.56 m 56.40 

769454 0.75 m 0.24 m 52.80 

769256 Gate valve 1.00 m 0.49 m 52.80 

769147 

DN 200 

1.25 m 0.74 m 55.00 

769261 (SW24) 1.50 m 0.99 m 60.10 

769455 2.00 m 1.49 m 66.10 

769257 1.00 m 0.38 m 64.80 

769212 Gate valve DN 1.25 m 0.63 m 69.90 

769262 

250/300 

1.50 m 0.88 m 75.80 

769456 

(SW27) 

2.00 m 1.38 m 82.40 

*Definition of pipe covering see page 73. 


Material 

• Square cap GJS400-15 galvanized / with VAS 

S235JR integrally forged 


• Coupling adapter, galvanized, one-sided 

tapered with elongated hole and Clip Pin 



• Socket adapter PE 


Gate Valves 


Valves 

3. Hydrants 












düker Telescope Stem extension set 

gW 336 dvgW Tested 

Düker Tapping Valve TOP Service connection valve 1004 and gate valve 2004 / 3004 / 4004 

come in the standard version with matching terminal for stem extension sets according to 

GW 336. The coupling adapter with the installation-friendly Clip Pin is delivered separately. 

Material 

• square cap GJS400-15 galvanized 




• Socket adapter with additional hole PE 

Item no. Valve Operating 

square 

Connection 

Coupling 

adapter 

Coupling Adapter Set 

– 72 – 

Length GL Price in € 

Obturator 

linkage* 

0.40 – 0.65 m 57.60 

769263 

769248 Tapping Valve 

Square 0.65 – 1.15 m 57.60 

769495 

769267 


valve 

e.g. TOP and 1004 

DIN 3223 E 20 x 20 mm 

socket adapter 

Ø 80 mm 

0.80 – 1.45 m 

0.90 – 1.55 m 

68.10 

71.30 

769496 1.10 – 2.45 m 75.50 

769264 

0.36 – 0.56 m 74.40 

769249 

Gate valve 

Square 0.56 – 1.01 m 74.40 

769608 

769268 

DN 40 – 150 

e.g. 2004, 3004 

and 4004 

DIN 3223 C 25 x 25 mm 


Ø 80 mm 

0.76 – 1.36 m 

0.91 – 1.60 m 

83.80 

89.10 

769609 1.26 – 2.36 m 90.10 

769292 

0.33 – 0.40 m 81.70 

769252 

Gate valve 

Square 0.49 – 0.76 m 93.30 

769271 

769613 

DN 200 – 300 

e.g. 2004, 3004 

and 4004 

DIN 3223 C 30 x 30 mm 


Ø 100 mm 

0.74 – 1.22 m 

0.82 – 1.42 m 

100.60 

102.70 

769614 1.17 – 2.12 m 115.30 

Coupling adapter galvanized, one-sided tapered with elongated hole 

and hole GW 336, 2x Clip Pin. 

Item no. Price in € 

769671 Tapping valve / 


valve (SW12) 

18.90 

769287 DN 40 / 50 (SW14) 18.90 

769288 DN 65 / 80 (SW17) 23.10 

769289 DN 100 / 150 (SW19) 23.10 

769290 DN 200 (SW24) 26.20 

769291 DN 250 / 300 (SW27) 28.30 

* Definition of pipe covering 

see page 73 

Düker valves

Stem extension sets according 

to the dvgW Publication gW 336 

definition Pipe Covering 

Definition of terms: 

GL = obturator linkage length, 

RD = pipe covering, 

GA = linkage departure point. 

This formula and the GA information enable the calculation of the 

stem extension length for the required pipe covering. 

GL = RD – 170 mm – GA 

After rearranging the formula it is also possible to calculate the pipe covering: 

RD = GL + 170 mm + GA 

Butterfly valves 

DN PN GA 

mm 

100 10 / 16 / 25 146 

Düker valves 

125 10 / 16 / 25 134 

150 10 / 16 / 25 121 

200 10 / 16 96 

200 25 150 

250 10 71 

250 16 / 25 126 

300 10 / 16 / 25 101 

350 10 / 16 75 

350 25 91 

400 10 50 

400 16 / 25 66 

450 10 / 16 / 25 41 

500 10 / 16 16 

500 25 141 

600 10 -34 

600 16 91 

600 25 296 

700 10 37 

700 16 / 25 242 

800 10 / 16 192 

800 25 94 

900 10 143 

900 16 45 

1000 10 89 

1000 16 / 25 49 

1200 10 -51 

Gate valves 

DN GA 

mm 

40 180 

50 200 

65 230 

80 224 

100 238 

125 260 

150 290 

200 350 

250 515 

300 565 

Service connection valves 


valve type 1004 

– 73 – 

DN 

GA 

mm 

25 115 

32 130 

40 127 

50 148 

Tapping valve TOP 236 



Gate Valves 


Valves 

3. Hydrants 












– 74 – 

Düker fittings




Düker fittings 

– 75 – 



Gate Valves 


Valves 

3. Hydrants 












Item Socket 

Type 1 

Socket 

Type 2 

DN 1 DN 2 Item no. 

Epoxy 

– 76 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Single socket SMU SMU 40 40 747132 193.40 747131 207.30 

tees with spigot SMU SMU 80 40 747136 208.20 747135 219.80 

and flanged branch SMU SMU 80 80 747140 236.70 747139 250.10 

(A) SMU SMU 100 40 747143 241.20 747142 255.00 

Item Socket 

Type 1 

Single socket 

tees with spigot 

and socket branch 

(B) 

Item Socket 

Type 1 

Flanged sockets (E) 

Item Socket 

Type 1 

Flanged socket 

duckfoot bends (EN) 

SMU SMU 100 50 747146 233.40 747145 247.30 

SMU SMU 100 80 747150 233.40 747149 247.30 

SMU SMU 100 100 747153 233.40 747152 247.30 

SMU SMU 125 40 747156 269.50 747155 284.10 

SMU SMU 125 50 747159 269.50 747158 284.10 

SMU SMU 125 80 747162 282.50 747161 298.10 

SMU SMU 125 100 747165 282.50 747164 298.10 

SMU SMU 150 100 747175 413.90 747174 438.70 

SMU SMU 150 150 747179 422.10 747178 446.70 

TYT TYT 80 40 745748 161.00 745747 172.20 

TYT TYT 80 80 745751 183.50 745750 196.10 

TYT TYT 100 80 745728 196.50 745727 209.80 

TYT TYT 100 100 745722 207.70 745721 222.40 

TYT TYT 150 80 745739 366.10 745738 391.70 

TYT TYT 150 100 745732 367.50 745731 393.40 

TYT TYT 150 150 745735 375.70 745734 401.30 

Socket 

Type 2 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

SMU SMU 40 40 747189 205.20 747188 224.50 

SMU SMU 100 100 754104 268.60 747192 280.10 

Socket 

Type 2 

DN Length Item no. 

Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

SMU SMU 40 100 747207 87.60 747206 90.90 

Socket 

Type 2 

DN Item no. 

Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

TYT TYT 80 745824 125.10 745823 134.60 

TYT TYT 100 745819 138.50 745818 148.90 

SMU SMU 80 747230 181.60 747229 192.00 

SMU SMU 100 747233 186.10 747232 195.10 

Düker fittings

Item Socket 

Type1 Flanged socket 

bends (EQ) 


Item Socket 

Type 1 

Flanged sockets (EU) 

Socket 

Type 2 

DN Item no. 

Epoxy 

Item DN Length Item no. 

Epoxy 

– 77 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

Flanged spigots (F) 40 300 870067 55.30 857637 57.80 

50 300 857639 69.10 857638 73.70 

65 400 870069 96.20 872582 101.60 

80 350 858405 69.80 858403 76.00 

100 360 856716 82.60 856712 88.30 

125 370 856849 107.40 856842 116.00 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

SMU SMU 40 747236 138.90 747235 151.30 

Socket 

Type 2 

DN Item no. 

Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

SMU SMU 40 747238 88.20 747237 95.20 

SMU SMU 50 747241 101.80 747240 109.40 

SMU SMU 65 747243 112.70 747242 122.00 

SMU SMU 80 747245 101.70 747244 106.90 

SMU SMU 100 747248 116.20 747247 121.20 

SMU SMU 125 747251 153.00 747250 160.10 

SMU SMU 150 747254 174.20 747253 181.90 

SMU SMU 200 747258 239.70 747257 250.10 

SMU SMU 250 747264 336.10 747263 350.10 

SMU SMU 300 747271 465.80 747270 485.30 

SMU SMU 350 747277 739.20 747276 774.10 

SMU SMU 400 747283 883.80 747282 924.20 

TYT TYT 80 745925 65.80 745924 69.90 

TYT TYT 100 745831 76.40 745830 81.90 

TYT TYT 125 745842 101.10 745841 108.80 

TYT TYT 150 745848 119.40 745847 128.10 

TYT TYT 200 745854 166.70 745853 178.30 

TYT TYT 250 745864 237.00 745863 252.70 

TYT TYT 300 745873 334.80 745872 356.70 

TYT TYT 350 745882 561.20 745881 598.80 

TYT TYT 400 745891 667.80 745890 711.50 

TYT TYT 500 745906 1,037.50 745905 1,105.90 

TYT TYT 600 745914 1,441.00 745913 1,534.50 

TYT TYT 700 745920 2,619.60 745919 2,766.80 

TYT TYT 800 745928 3,131.20 745927 3,365.30 

TYT TYT 1000 745837 5,007.30 745836 5,408.40 

STO STO 400 754105 1,182.40 754112 1,229.70 

STO STO 500 754106 1,805.70 754113 1,880.70 

STO STO 600 754107 2,456.80 754114 2,568.60 

STO STO 700 754108 4,410.80 754115 4,580.80 

STO STO 800 754109 4,929.60 754116 5,111.80 


Gate Valves 


Valves 

3. Hydrants 













Epoxy 

* in-between lengths are available as well. 

For all lengths not mentioned we will invoice a surcharge of e 200 on the price of the closest larger length. 

– 78 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Flanged pipes (F) 150 380 875257 120.50 856873 129.10 

200 400 857499 179.00 857497 192.50 

250 420 866505 270.20 866503 290.00 

300 440 875258 356.70 866682 382.40 

350 460 857544 604.20 857542 647.00 

400 480 857573 786.90 857571 842.20 

500 520 857607 1,341.90 857606 1,435.10 

600 560 857616 1,865.70 713335 1,995.60 

700 600 708825 2,839.60 707143 3,008.50 

800 600 704145 3,376.80 718923 3,578.10 

900 600 729507 4,324.40 741829 4,582.50 

1000 600 737436 5,556.10 741830 5,887.40 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-flanged pipes 40 100 870978 98.80 856684 104.30 

(FF)* 40 150 856691 98.80 856688 104.30 

40 200 856700 98.80 856693 104.30 

40 300 856721 99.70 856717 106.40 

40 400 856732 96.70 856727 101.10 

40 500 856753 147.60 856743 156.10 

40 600 856763 237.10 856756 251.20 

40 800 856774 250.00 856769 264.40 

40 1000 856784 250.00 856779 264.40 

50 100 856791 88.90 856788 95.10 

50 150 856797 88.90 856794 95.10 

50 200 856803 78.40 856800 82.30 

50 250 856810 101.20 856807 107.50 

50 300 856825 88.90 856822 95.10 

50 400 856837 110.40 856834 117.00 

50 500 856841 110.40 856839 117.00 

50 600 856848 178.00 856845 188.20 

50 700 856853 277.30 856850 295.40 

50 800 856862 277.30 856858 294.50 

50 1000 856874 224.20 856870 238.80 

65 100 864783 120.80 864850 128.00 

65 150 864857 138.60 864860 147.00 

65 200 864869 124.70 864871 132.30 

65 300 864899 144.60 864904 154.30 

65 400 864921 135.00 864924 144.00 

65 500 864940 127.70 864943 136.30 

65 600 864972 196.40 864968 207.30 

65 800 864983 270.70 864985 287.60 

65 1000 864992 270.70 864995 287.60 

Düker fittings



Epoxy 

– 79 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 


(FF)* 80 150 856896 73.20 856893 79.30 

80 200 857154 73.20 857151 79.30 

80 250 857165 82.30 857164 90.00 

80 300 857174 86.90 857173 95.10 

80 350 857182 108.20 857180 118.20 

80 400 873613 108.20 857188 118.20 

80 500 857201 108.20 857199 118.20 

80 600 857356 190.10 857354 205.60 

80 700 872593 190.10 857361 205.60 

80 800 857370 190.10 857369 205.60 

80 900 857375 223.90 857373 242.00 

80 1000 857379 209.00 857378 225.90 

80 1500 on request 


80 2500 

80 3000 

80 3500 

80 4000 

80 4500 

80 5000 

100 100 857395 83.80 857394 91.40 

100 150 857400 83.80 857399 91.40 

100 200 857407 83.80 857405 91.40 

100 250 857415 99.20 857414 107.80 

100 300 857424 99.20 857422 107.80 

100 350 857431 135.30 857430 147.20 

100 400 857436 128.00 857435 139.30 

100 500 857448 128.00 857446 139.30 

100 600 857460 209.40 857458 226.10 

100 700 857469 209.40 857467 226.10 

100 800 857681 209.40 857680 226.10 

100 900 873623 246.80 702709 267.70 

100 1000 857687 230.40 857686 249.90 



100 2500 

100 3000 

100 3500 

100 4000 

100 4500 

100 5000 




Gate Valves 


Valves 

3. Hydrants 













Epoxy 

– 80 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 


(FF)* 125 150 858453 130.50 858452 142.40 

125 200 858458 130.50 858456 142.40 

125 250 858462 141.80 858461 153.30 

125 300 876049 141.80 858466 153.30 

125 350 704457 207.80 705273 224.60 

125 400 858467 190.10 858471 205.60 

125 500 858474 190.10 858473 205.60 

125 600 858479 283.70 858478 306.90 

125 700 858483 283.70 707996 306.90 

125 800 704525 283.70 858488 306.90 

125 900 711336 334.90 741831 362.50 

125 1000 858494 312.60 858493 338.40 



125 2500 

125 3000 

125 3500 

125 4000 

125 4500 

125 5000 

150 100 875916 131.20 858501 142.40 

150 150 858507 131.20 858506 142.40 

150 200 858513 131.20 858512 142.40 

150 250 858520 155.50 858519 169.30 

150 300 858523 155.50 858522 169.30 

150 350 704520 212.70 859071 231.10 

150 400 859084 183.00 859080 197.50 

150 500 859113 183.00 859110 197.50 

150 600 859135 277.50 859133 300.90 

150 700 703969 293.20 859150 318.00 

150 800 859265 293.20 859263 318.00 

150 900 859286 357.00 859284 385.70 

150 1000 875308 333.20 859299 360.00 



150 2500 

150 3000 

150 3500 

150 4000 

150 4500 

150 5000 



Düker fittings



Epoxy 

– 81 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 


(FF)* 200 150 873710 172.50 865339 187.10 

200 200 865350 172.50 865349 187.10 

200 250 873713 193.60 865369 209.60 

200 300 865382 193.60 865381 209.60 

200 350 704456 286.80 874761 310.00 

200 400 865409 247.10 865407 267.90 

200 500 875311 247.10 865440 267.90 

200 600 865466 376.60 865463 407.10 

200 700 873717 397.90 865771 430.20 

200 800 872708 407.50 865777 440.50 

200 900 711338 467.80 877643 506.80 

200 1000 875600 436.60 865788 473.00 



200 2500 

200 3000 

200 3500 

200 4000 

200 4500 

200 5000 

250 100 704698 290.00 713922 313.30 

250 150 876276 290.00 703220 313.30 

250 200 865816 248.60 865815 269.50 

250 250 701384 329.50 874766 356.60 

250 300 865852 285.30 865850 308.30 

250 350 710199 472.40 734045 511.00 

250 400 865882 359.30 865880 389.30 

250 500 865910 359.30 865908 389.30 

250 600 877291 559.00 865946 604.20 

250 700 711341 559.00 865968 604.20 

250 800 703919 598.90 865981 647.40 

250 900 712157 674.60 741838 730.00 

250 1000 873723 629.70 865991 681.30 



250 2500 

250 3000 

250 3500 

250 4000 

250 4500 

250 5000 




Gate Valves 


Valves 

3. Hydrants 













Epoxy 



– 82 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 


(FF)* 300 150 715819 337.40 705303 365.50 

300 200 866191 311.00 866188 336.90 

300 250 866225 381.50 711608 413.50 

300 300 866250 337.00 866245 365.30 

300 350 700441 523.80 734044 566.40 

300 400 876277 495.80 866273 536.00 

300 500 866292 495.80 866291 536.00 

300 600 876026 642.80 866318 694.40 

300 700 866335 642.80 872715 694.40 

300 800 866354 642.80 866353 694.40 

300 900 707840 806.20 716609 871.00 

300 1000 866373 752.40 866372 812.90 



300 2500 

300 3000 

300 3500 

300 4000 

300 4500 

300 5000 

350 200 732454 761.10 859387 822.00 

350 250 737273 799.00 859396 864.00 

350 300 719987 799.00 741840 864.00 

350 350 714809 953.00 741842 1,029.70 

350 400 705195 953.00 859414 1,029.70 

350 500 702259 953.00 707247 1,029.70 

350 600 725207 1,038.90 741843 1,122.30 

350 700 716717 1,038.90 741844 1,122.30 

350 800 703922 1,038.90 716265 1,122.30 

350 900 731813 1,107.80 741845 1,196.80 

350 1000 859433 1,107.80 711300 1,196.80 



350 2500 

350 3000 

350 3500 

350 4000 

350 4500 

350 5000 

Düker fittings





Epoxy 

– 83 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 


(FF)* 400 250 742076 944.20 732224 1,020.30 

400 300 873803 944.20 859655 1,020.30 

400 350 740227 1,069.70 741846 1,156.30 

400 400 859663 1,069.70 859660 1,156.30 

400 500 859668 1,069.70 859667 1,156.30 

400 600 712904 1,176.10 719177 1,270.20 

400 700 723111 1,176.10 741847 1,270.20 

400 800 703923 1,176.10 713843 1,270.20 

400 900 708827 1,260.10 741848 1,360.90 

400 1000 859677 1,260.10 715216 1,360.90 



400 2500 

400 3000 

400 3500 

400 4000 

400 4500 

400 5000 

500 200 709486 1,381.40 713311 1,493.20 

500 250 733791 1,458.50 722433 1,575.30 

500 300 708229 1,497.50 731553 1,617.50 

500 350 709195 1,537.30 859681 1,660.80 

500 400 876914 1,537.30 741849 1,660.80 

500 500 873811 1,455.00 874804 1,571.90 

500 600 713574 1,836.20 741850 1,983.30 

500 700 712258 1,836.20 741417 1,983.30 

500 800 703924 1,963.70 859689 2,120.90 

500 900 727385 2,104.00 733436 2,272.40 

500 1000 706739 2,104.00 876210 2,272.40 



500 2500 

500 3000 

500 3500 

500 4000 

500 4500 

500 5000 


Gate Valves 


Valves 

3. Hydrants 













Epoxy 



– 84 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-flanged pipes 600 200 715720 1,770.30 754681 1,911.80 

(FF)* 600 250 727212 1,770.30 741418 1,912.50 

600 300 736837 1,770.30 741476 1,912.50 

600 350 742077 1,793.10 740682 1,937.70 

600 400 712285 1,883.50 741478 2,035.40 

600 500 859698 1,883.50 732369 2,035.40 

600 600 859711 2,640.50 741481 2,852.10 

600 700 722839 2,640.50 741482 2,852.10 

600 800 704785 2,640.50 741484 2,852.10 

600 900 754670 2,640.50 741716 2,852.10 

600 1000 704419 2,640.50 741485 2,852.10 



600 2500 

600 3000 

600 3500 

600 4000 

600 4500 

600 5000 

700 300 727228 3,167.50 741486 3,421.40 

700 350 742078 3,502.40 741717 3,783.60 

700 400 741903 3,502.40 741718 3,783.60 

700 500 875866 3,502.40 741500 3,783.60 

700 600 733936 4,208.20 733432 4,546.10 

700 700 741905 4,208.20 741502 4,546.10 

700 800 741907 4,208.20 741719 4,546.10 

700 900 725548 4,208.20 741504 4,546.10 

700 1000 724500 4,208.20 741514 4,546.10 



800 300 722841 3,670.20 741515 3,964.00 

800 350 741908 4,129.40 741720 4,460.60 

800 400 711137 4,129.40 741516 4,460.60 

800 500 722484 4,129.40 741517 4,460.60 

800 600 711957 5,128.10 741518 5,539.50 

800 700 741910 5,128.10 741519 5,539.50 

800 800 721604 5,128.10 741520 5,539.50 

800 900 741912 5,128.10 741521 5,539.50 

800 1000 711958 5,128.10 741522 5,539.50 



Düker fittings


– 85 – 


Item DN € 

Surcharge for flanged pipes with cast-on or 

welded-on wall flanges 

50 171.10 

65 192.80 

80 232.20 

100 232.20 

125 237.50 

150 271.70 

200 294.20 

250 320.30 

300 351.20 

350 360.00 

400 360.00 

500 362.60 

600 397.20 

Item DN Angle Item no. 

Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-flanged bends 40 11° 860247 174.90 741523 183.20 

(FFK) 50 11° 870984 179.40 725973 187.90 

65 11° 870985 267.00 741524 279.90 

80 11° 857795 135.60 857793 145.20 

100 11° 857870 154.00 857864 166.10 

125 11° 879210 233.30 857981 250.50 

150 11° 858002 248.60 858001 266.90 

200 11° 876791 410.10 865446 438.80 

250 11° 706111 587.60 865907 622.90 

300 11° 703503 864.20 865988 916.20 

350 11° 739416 1,373.00 741525 1,455.20 

400 11° 858036 1,100.60 706912 1,166.20 

500 11° 858384 1,495.30 734426 1,585.30 

600 11° 858421 3,909.30 858420 4,142.30 

700 11° 875864 4,370.50 741526 4,631.50 

800 11° 709353 4,824.80 741529 5,112.50 

40 22° 860251 174.90 741540 183.20 

50 22° 870988 179.40 719412 187.90 

65 22° 870990 299.40 719411 313.80 

80 22° 857809 135.60 857806 145.20 

100 22° 857896 154.00 857893 166.10 

125 22° 879211 233.30 857985 250.50 

150 22° 858010 248.60 858009 266.90 

200 22° 865465 410.10 865464 438.80 

250 22° 876790 587.60 865937 622.90 

300 22° 866006 864.20 866003 916.20 


Gate Valves 


Valves 

3. Hydrants 












Item DN Angle Item no. 

Epoxy 

– 86 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-flanged bends 350 22° 727239 1,483.00 708118 1,572.30 

(FFK) 400 22° 858044 1,164.20 858043 1,233.60 

500 22° 877175 1,590.10 741541 1,685.80 

600 22° 860246 3,909.30 712959 4,142.30 

700 22° 874257 4,595.40 741543 4,868.80 

800 22° 741914 4,953.90 741544 5,248.80 

40 30° 870991 174.90 741548 183.20 

50 30° 870992 179.40 711064 187.90 

65 30° 870993 342.70 719413 359.30 

80 30° 857822 135.60 857819 145.20 

100 30° 857927 154.00 857925 166.10 

125 30° 857991 233.30 857989 250.50 

150 30° 858020 248.60 858017 266.90 

200 30° 865849 410.10 865841 438.80 

250 30° 703959 587.60 870743 622.90 

300 30° 866087 864.20 866086 916.20 

350 30° 866130 1,561.80 741550 1,656.30 

400 30° 858052 1,287.20 858050 1,364.00 

500 30° 858393 1,935.20 876211 2,051.10 

600 30° 712279 3,909.30 860270 4,142.30 

700 30° 716620 5,395.20 741551 5,716.60 

800 30° 738465 5,733.20 741552 6,131.70 

40 45° 870077 104.30 860255 110.20 

50 45° 857782 104.30 857776 109.40 

65 45° 870078 169.30 870740 176.30 

80 45° 857838 96.10 857833 103.80 

100 45° 857951 108.20 857949 117.00 

125 45° 857996 143.40 857995 154.10 

150 45° 858029 176.90 858026 189.80 

200 45° 865870 306.40 865866 329.00 

250 45° 865963 468.00 865961 497.00 

300 45° 866101 570.40 866099 604.80 

350 45° 877997 1,010.10 704199 1,070.90 

400 45° 858368 1,279.20 858367 1,356.30 

500 45° 858401 2,271.20 858399 2,407.40 

600 45° 706005 3,739.90 860434 3,962.80 

700 45° 873794 4,896.10 741553 5,188.20 

800 45° 878088 6,295.30 741554 6,669.50 

Düker fittings


Item DN 1 DN 2 Length Item no. 

Epoxy 

– 87 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

Double-flanged tapers 50 40 200 859261 81.40 859277 84.60 

(FFR) 65 40 200 870752 90.70 874483 95.60 

65 50 200 870080 87.10 870079 91.90 

80 40 200 876030 80.40 859292 86.20 

80 50 200 859325 76.10 859321 81.60 

80 65 200 859352 82.60 859348 88.60 

100 40 200 859370 83.70 859368 90.80 

100 50 200 859381 76.10 859376 81.60 

100 65 200 859427 82.20 859422 89.20 

100 80 200 859455 82.20 859448 89.20 

125 65 200 702728 338.40 859751 361.90 

125 80 200 859757 98.10 859756 106.00 

125 100 200 859764 97.50 859763 105.20 

150 50 300 704407 153.10 859774 164.50 

150 80 200 859782 111.80 859781 119.80 

150 100 200 859794 113.40 859792 121.40 

150 125 200 859803 120.40 859802 129.00 

200 80 300 874377 160.20 866192 171.90 

200 100 300 866246 160.20 866234 171.90 

200 125 300 877334 182.20 866284 195.80 

200 150 300 866324 175.30 866319 188.30 

250 80 300 703137 605.90 866390 648.40 

250 100 300 866399 268.50 866398 287.50 

250 125 300 701380 613.90 866424 657.90 

250 150 300 870477 268.50 866443 287.50 

250 200 300 866489 268.50 866487 287.50 

300 100 300 866527 327.80 866526 351.30 

300 150 300 866536 327.80 866535 351.30 

300 200 300 872598 327.80 866550 351.30 

300 250 300 866564 335.50 866563 358.60 

350 200 300 874178 815.20 874504 872.50 

350 250 300 701235 602.40 859923 645.30 

350 300 300 859934 582.50 859932 624.20 

400 200 300 860157 654.10 860152 699.70 

400 250 300 860190 654.10 860186 699.70 

400 300 300 860230 666.30 860228 713.20 

400 350 300 860282 721.80 874181 772.40 

500 250 600 708034 1,517.70 876240 1,624.30 

500 300 600 701362 1,436.40 860447 1,537.30 

500 350 600 711279 1,788.40 741555 1,913.30 

500 400 600 860529 1,436.40 860528 1,537.30 

600 350 600 741916 2,331.30 741359 2,493.90 

600 400 600 860580 2,206.40 860576 2,360.30 

600 500 600 860599 2,206.40 860597 2,360.30 

700 500 600 861008 3,225.60 730991 3,418.50 

700 600 600 861027 3,225.60 729434 3,418.50 

800 500 600 720685 4,078.00 741360 4,321.50 

800 600 600 705193 4,078.00 874525 4,321.50 

800 700 600 704120 3,859.60 741361 4,090.00 

900 800 600 878364 4,868.00 741363 5,158.40 

1000 800 600 726043 5,654.80 741365 5,991.90 

1000 900 600 741973 5,654.80 741366 5,991.90 


Gate Valves 


Valves 

3. Hydrants 












Item DN 1 DN 2 Length Item no. 

Epoxy 

– 88 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-flanged tapers 80 40 200 732240 249.00 741367 267.20 

(FFRe) 80 50 200 714972 282.00 870768 300.60 

Item Socket 

Type 1 

Socket 

Type 2 

80 65 200 722038 377.80 741369 408.70 

100 50 200 861708 251.40 735329 269.40 

100 65 200 712741 261.10 741370 280.00 

100 80 200 861714 208.50 861713 223.60 

125 65 200 741974 291.60 741724 313.40 

125 80 200 713109 248.10 741373 266.20 

125 100 200 873902 352.00 741374 377.30 

150 50 300 720648 394.40 734744 423.10 

150 80 300 861759 424.50 741375 455.10 

150 100 300 875940 331.90 861769 355.60 

150 125 300 725391 475.80 741377 500.90 

200 100 300 720930 444.90 729742 476.10 

200 125 300 745455 531.60 722779 569.50 

200 150 300 866735 454.90 874736 487.30 

250 125 300 741975 774.90 741379 830.10 

250 150 300 713189 807.30 741380 863.70 

250 200 300 711272 827.10 741383 884.60 

300 150 300 714208 987.60 866806 1,056.60 

300 200 300 715103 1,009.00 866826 1,079.40 

300 250 300 711335 1,042.80 866842 1,115.70 

350 200 500 742818 1,263.60 741725 1,351.40 

350 250 500 735281 1,408.60 741387 1,507.40 

350 300 500 741977 1,432.00 716264 1,532.10 

400 250 500 733789 1,457.50 741388 1,560.20 

400 300 500 866878 1,558.30 741389 1,746.20 

400 350 500 740537 1,598.90 741390 1,791.70 

500 350 500 741978 1,846.40 741391 1,975.30 

500 400 500 726607 1,932.20 873812 2,066.90 

600 400 500 706004 2,650.30 734185 2,835.20 

600 500 500 730770 2,753.40 721410 2,944.80 

DN Angle Item no. 

Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Single socket bends SMU SMU 40 11° 747291 126.30 754117 134.70 

(MK) SMU SMU 80 11° 747307 135.10 747306 141.70 

SMU SMU 100 11° 747319 136.60 747318 143.90 

SMU SMU 125 11° 747331 177.80 747330 186.90 

SMU SMU 150 11° 747343 217.60 747342 227.10 

SMU SMU 200 11° 747355 333.10 747354 344.60 

TYT TYT 80 11° 746030 96.70 746029 103.30 

TYT TYT 100 11° 745937 104.80 745936 112.70 

TYT TYT 125 11° 745949 138.70 745948 149.10 

TYT TYT 150 11° 745961 171.00 745960 182.00 

TYT TYT 200 11° 745973 261.10 745972 278.90 

TYT TYT 250 11° 745985 386.30 745984 408.50 

TYT TYT 300 11° 745997 545.40 745996 576.00 

Düker fittings


Item Socket 

Type 1 

Socket 

Type 2 


Epoxy 

– 89 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

Single socket bends SMU SMU 40 22° 747293 114.70 754118 125.50 

(MK) SMU SMU 80 22° 747310 129.00 747309 134.70 

SMU SMU 100 22° 747322 146.30 747321 153.20 

SMU SMU 125 22° 747334 192.10 747333 201.00 

SMU SMU 150 22° 747346 262.70 747345 275.90 

SMU SMU 200 22° 747358 439.80 747357 458.60 

TYT TYT 80 22° 746033 101.50 746032 108.30 

TYT TYT 100 22° 745940 109.50 745939 117.40 

TYT TYT 125 22° 745952 153.30 745951 163.00 

TYT TYT 150 22° 745964 216.20 745963 230.70 

TYT TYT 200 22° 745976 365.70 745975 390.20 

TYT TYT 250 22° 745988 376.50 745987 397.40 

TYT TYT 300 22° 746000 534.10 745999 564.90 

SMU SMU 40 30° 747295 125.60 754123 137.60 

SMU SMU 80 30° 747313 140.50 747312 146.90 

SMU SMU 100 30° 747325 162.50 747324 170.60 

SMU SMU 125 30° 747337 222.70 747336 234.00 

SMU SMU 150 30° 747349 304.40 747348 321.10 

SMU SMU 200 30° 747361 379.10 747360 395.50 

TYT TYT 80 30° 746036 96.70 746035 103.30 

TYT TYT 100 30° 745943 130.30 745942 139.20 

TYT TYT 125 30° 745955 183.90 745954 196.10 

TYT TYT 150 30° 745967 258.00 745966 275.90 

TYT TYT 200 30° 745979 306.00 745978 327.50 

TYT TYT 250 30° 745991 466.70 745990 493.80 

TYT TYT 300 30° 746003 660.40 746002 697.90 

SMU SMU 40 45° 747297 143.20 754124 155.40 

SMU SMU 80 45° 747316 158.00 747315 166.10 

SMU SMU 100 45° 747328 194.50 747327 205.00 

SMU SMU 125 45° 747340 218.00 747339 229.10 

SMU SMU 150 45° 747352 291.80 747351 307.10 

SMU SMU 200 45° 747364 482.70 747363 504.60 

TYT TYT 80 45° 746039 130.40 746038 139.50 

TYT TYT 100 45° 745946 162.60 745945 173.70 

TYT TYT 125 45° 745958 179.00 745957 191.30 

TYT TYT 150 45° 745970 245.10 745969 261.90 

TYT TYT 200 45° 745982 407.70 745981 435.70 

TYT TYT 250 45° 745994 466.70 745993 493.80 

TYT TYT 300 45° 746006 660.40 746005 697.90 


Gate Valves 


Valves 

3. Hydrants 












Item Socket 

Type 1 

Socket 

Type 2 


Epoxy 

– 90 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket tees SMU SMU 40 40 747387 191.70 747386 203.70 

with flanged branch SMU SMU 50 50 747391 287.70 747390 311.60 

(MMA) SMU SMU 65 65 747394 276.60 747393 299.40 

SMU SMU 80 40 747396 226.60 747395 236.70 

SMU SMU 80 50 747399 226.60 747398 236.50 

SMU SMU 80 80 747404 226.60 747403 236.00 

SMU SMU 100 40 747407 232.80 747406 241.30 

SMU SMU 100 50 747410 232.80 747409 241.30 

SMU SMU 100 80 747414 222.30 747413 231.30 

SMU SMU 100 100 747417 222.80 747416 231.20 

SMU SMU 125 40 747420 295.40 747419 307.30 

SMU SMU 125 50 747423 295.40 747422 307.30 

SMU SMU 125 80 747426 291.90 747425 303.60 

SMU SMU 125 100 747429 301.20 747428 313.50 

SMU SMU 125 125 747432 313.80 747431 326.60 

SMU SMU 150 80 747439 335.60 747438 349.40 

SMU SMU 150 100 747442 337.10 747441 351.20 

SMU SMU 150 150 747446 376.20 747445 392.20 

SMU SMU 200 80 747453 499.60 747452 520.30 

SMU SMU 200 100 747456 501.30 747455 522.00 

SMU SMU 200 150 747460 546.90 747459 569.70 

SMU SMU 200 200 747463 546.90 747462 569.90 

SMU SMU 250 80 747468 637.00 747467 662.10 

SMU SMU 250 100 747471 638.80 747470 663.70 

SMU SMU 300 80 747480 789.80 747479 818.60 

SMU SMU 300 100 747483 789.80 747482 818.60 

SMU SMU 300 150 747486 794.60 747485 824.80 

SMU SMU 300 200 747489 905.70 747488 942.90 

SMU SMU 300 300 747493 1,018.50 747492 1,064.30 

TYT TYT 80 40 746344 139.20 746343 148.50 

TYT TYT 80 50 746347 148.30 746346 158.30 

TYT TYT 80 80 746352 130.90 746351 140.00 

TYT TYT 100 40 746047 128.30 746046 136.60 

TYT TYT 100 50 746050 135.20 746049 143.90 

TYT TYT 100 65 746053 189.20 746052 202.60 

TYT TYT 100 80 746056 129.80 746055 138.10 

TYT TYT 100 100 746042 137.20 746041 147.10 

TYT TYT 125 40 746070 168.60 746069 178.80 

TYT TYT 125 50 746073 185.60 746072 197.80 

TYT TYT 125 80 746077 177.60 746076 188.30 

TYT TYT 125 100 746064 191.10 746063 203.30 

TYT TYT 125 125 746067 225.10 746066 240.20 

TYT TYT 150 40 746094 219.10 746093 233.80 

TYT TYT 150 50 746097 263.10 746096 280.90 

TYT TYT 150 80 746103 219.10 746102 233.80 

TYT TYT 150 100 746080 220.50 746079 235.30 

TYT TYT 150 125 746085 279.40 746084 298.10 

Düker fittings


Item Socket 

Type 1 

Socket 

Type 2 


Epoxy 

– 91 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

Double-socket tees TYT TYT 150 150 746088 225.10 746087 239.70 

with flanged branch TYT TYT 200 40 746127 335.40 746126 357.20 

(MMA) TYT TYT 200 50 746130 335.40 746129 357.20 

TYT TYT 200 80 746137 318.20 746136 338.90 

TYT TYT 200 100 746106 318.20 746105 338.90 

TYT TYT 200 150 746114 339.50 746113 361.10 

TYT TYT 200 200 746119 374.50 746118 398.10 

TYT TYT 250 50 746164 475.90 746163 506.50 

TYT TYT 250 80 746168 399.50 746167 425.70 

TYT TYT 250 100 746140 415.50 746139 442.40 

TYT TYT 250 150 746145 442.10 746144 470.00 

TYT TYT 250 200 746150 486.40 746149 517.50 

TYT TYT 250 250 746155 567.30 746154 604.80 

TYT TYT 300 80 746198 527.70 746197 560.60 

TYT TYT 300 100 746171 527.70 746170 560.60 

TYT TYT 300 150 746178 533.90 746177 568.00 

TYT TYT 300 200 746181 583.30 746180 620.90 

TYT TYT 300 250 746186 785.10 746185 836.90 

TYT TYT 300 300 746191 785.10 746190 836.90 

TYT TYT 350 100 746201 1,144.90 746200 1,219.90 

TYT TYT 350 200 746206 1,257.80 746205 1,340.40 

TYT TYT 350 350 746213 1,355.90 746212 1,445.30 

TYT TYT 400 80 746247 999.70 746246 1,064.50 

TYT TYT 400 100 746220 1,001.40 746219 1,066.10 

TYT TYT 400 150 746225 1,014.30 746224 1,080.10 

TYT TYT 400 200 746228 1,184.90 746227 1,261.90 

TYT TYT 400 300 746237 1,345.60 746236 1,434.40 

TYT TYT 400 400 746242 1,470.00 746241 1,566.60 

TYT TYT 500 80 746281 2,183.00 746280 2,324.70 

TYT TYT 500 100 746253 2,183.00 746252 2,324.70 

TYT TYT 500 150 746256 2,294.00 746255 2,443.60 

TYT TYT 500 200 746259 2,294.00 746258 2,443.60 

TYT TYT 500 300 746266 2,690.40 746265 2,868.00 

TYT TYT 500 400 746271 2,957.80 746270 3,153.20 

TYT TYT 500 500 746276 2,991.60 746275 3,189.20 

TYT TYT 600 100 746284 2,817.20 746283 2,971.30 

TYT TYT 600 150 746287 2,817.20 746286 2,971.30 

TYT TYT 600 200 746290 2,817.20 746289 2,971.30 

TYT TYT 600 250 746295 3,292.00 746294 3,474.30 

TYT TYT 600 300 746299 3,292.00 746298 3,474.30 

TYT TYT 600 400 746305 3,763.20 746304 3,972.50 

TYT TYT 600 500 746309 4,141.00 746308 4,372.90 

TYT TYT 600 600 746312 4,141.00 746311 4,372.90 

TYT TYT 700 150 746319 4,452.80 746318 4,698.20 

TYT TYT 700 200 746322 4,452.80 746321 4,698.20 

TYT TYT 700 300 746326 5,482.40 746325 5,789.60 


Gate Valves 


Valves 

3. Hydrants 












Item Socket 

Type 1 

Socket 

Type 2 


Epoxy 

– 92 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket tees TYT TYT 700 400 746331 5,482.40 746330 5,789.60 

with flanged branch TYT TYT 700 500 746334 5,779.70 746333 6,104.70 

(MMA) TYT TYT 700 600 746337 5,779.70 746336 6,104.70 

Item Socket 

Type 1 

TYT TYT 700 700 746341 6,336.40 746340 6,694.60 

TYT TYT 800 200 746359 6,222.90 746358 6,559.80 

TYT TYT 800 300 746364 6,932.30 746363 7,311.20 

TYT TYT 800 400 746369 6,932.30 746368 7,311.20 

TYT TYT 800 500 746373 7,260.90 746372 7,659.10 

TYT TYT 800 600 746377 7,952.20 746376 8,393.10 

TYT TYT 800 700 746381 7,932.50 746380 8,371.00 

TYT TYT 800 800 746384 8,689.70 746383 9,173.00 

STO STO 500 80 754298 3,685.00 754126 3,801.90 

STO STO 500 100 754301 3,685.00 754127 3,801.90 

STO STO 500 150 754302 3,701.30 754130 3,819.20 

STO STO 500 200 754303 3,701.30 754132 3,819.20 

STO STO 500 300 754304 3,752.10 754134 3,873.10 

STO STO 500 400 754305 4,424.10 754137 4,584.90 

STO STO 500 500 754306 4,465.00 754140 4,627.60 

STO STO 600 80 754307 4,706.70 754141 4,867.00 

STO STO 600 100 754308 4,706.70 754144 4,867.00 

STO STO 600 150 754309 4,706.70 754146 4,867.00 

STO STO 600 200 754310 4,706.70 754148 4,867.00 

STO STO 600 250 754311 5,238.80 754149 5,430.10 

STO STO 600 300 754312 5,238.80 754150 5,430.10 

STO STO 600 600 754313 5,849.90 754151 6,077.00 

Socket 

Type 2 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 


with socket branch SMU SMU 80 40 747514 212.80 747513 217.40 

(MMB) SMU SMU 80 80 747518 228.10 747517 232.50 

SMU SMU 100 40 754330 233.60 747520 239.10 

SMU SMU 100 80 747524 250.60 747523 255.90 

SMU SMU 100 100 747527 258.70 747526 263.40 

SMU SMU 125 40 747530 307.50 747529 314.70 

SMU SMU 125 50 747533 299.40 747532 305.90 

SMU SMU 125 80 747536 318.20 747535 325.00 

SMU SMU 125 100 747539 326.40 747538 332.90 

SMU SMU 125 125 747542 347.80 747541 355.10 

SMU SMU 150 80 747548 375.50 747547 383.60 

SMU SMU 150 100 747551 383.70 747550 391.60 

SMU SMU 150 125 747554 399.40 747553 408.80 

SMU SMU 150 150 747557 426.70 747556 436.30 

Düker fittings


Item Socket 

Type 1 

Socket 

Type 2 


Epoxy 

– 93 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 


with socket branch SMU SMU 200 100 747567 512.40 747566 524.30 

(MMB) SMU SMU 200 125 747570 576.40 747569 591.80 

SMU SMU 200 150 747573 594.10 747572 609.50 

SMU SMU 200 200 747576 622.40 747575 636.70 

SMU SMU 250 100 747580 709.80 747579 728.50 

SMU SMU 300 100 747589 919.50 747588 944.70 

TYT SMU 80 40 746571 153.90 746570 162.10 

TYT TYT 80 80 746575 141.80 746574 150.40 

TYT SMU 100 40 746400 149.00 746399 157.30 

TYT SMU 100 50 746403 165.50 746402 173.40 

TYT TYT 100 80 746406 143.20 746405 151.80 

TYT TYT 100 100 746397 146.40 746396 154.90 

TYT SMU 125 40 746415 219.00 746414 229.40 

TYT SMU 125 50 746418 211.90 746417 221.60 

TYT TYT 125 80 746421 200.80 746420 212.00 

TYT TYT 125 100 746409 208.90 746408 220.10 

TYT TYT 125 125 746412 228.10 746411 239.90 

TYT SMU 150 40 746433 244.30 746432 256.00 

TYT TYT 150 80 746437 222.80 746436 237.10 

TYT TYT 150 100 746424 225.90 746423 240.00 

TYT TYT 150 125 746427 259.90 746426 276.20 

TYT TYT 150 150 746430 252.20 746429 266.90 

TYT SMU 200 40 746451 331.20 754152 350.30 

TYT SMU 200 50 746453 336.70 747003 355.40 

TYT TYT 200 80 746456 314.40 746455 333.90 

TYT TYT 200 100 746440 317.50 746439 336.80 

TYT TYT 200 125 746443 395.10 746442 420.00 

TYT TYT 200 150 746446 350.00 746445 371.60 

TYT TYT 200 200 746449 387.00 746448 410.70 

TYT TYT 250 80 746474 464.50 746473 494.00 

TYT TYT 250 100 746459 466.10 746458 495.40 

TYT TYT 250 150 746465 511.50 746464 544.20 

TYT TYT 250 200 746468 559.50 746467 594.40 

TYT TYT 250 250 746471 563.00 746470 597.60 

TYT TYT 300 80 746496 635.30 746495 675.60 

TYT TYT 300 100 746477 636.80 746476 677.00 

TYT TYT 300 150 746483 646.60 746482 687.00 

TYT TYT 300 200 746486 714.20 746485 758.70 

TYT TYT 300 250 746489 870.60 746488 926.50 

TYT TYT 300 300 746492 875.50 746491 931.20 

TYT TYT 350 100 746499 1,349.40 746498 1,438.90 

TYT TYT 350 200 746503 1,480.10 746502 1,576.90 

TYT TYT 350 250 746506 1,962.00 746505 2,092.60 

TYT TYT 350 300 746509 1,995.80 746508 2,128.60 

TYT TYT 350 350 746512 2,086.50 746511 2,224.40 


Gate Valves 


Valves 

3. Hydrants 












Item Socket 

Type 1 

Socket 

Type 2 


Epoxy 

– 94 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket tees TYT TYT 400 100 746515 1,532.90 746514 1,633.10 

with socket branch TYT TYT 400 150 746518 1,536.30 746517 1,636.40 

(MMB) TYT TYT 400 200 746521 1,539.40 746520 1,639.30 

Item Socket 

Type 1 

Item Socket 

Type 1 

TYT TYT 400 250 746524 1,581.70 746523 1,685.00 

TYT TYT 400 300 746527 1,658.90 746526 1,766.50 

TYT TYT 400 400 746530 2,532.00 746529 2,699.30 

TYT TYT 500 100 746535 2,029.70 746534 2,160.10 

TYT TYT 500 200 746538 2,737.20 746537 2,916.60 

TYT TYT 500 300 746542 2,840.50 746541 3,017.60 

TYT TYT 500 400 746545 2,998.70 746544 3,194.30 

TYT TYT 500 500 746548 3,350.00 746547 3,567.40 

TYT TYT 600 600 746556 4,337.10 746555 4,618.20 

TYT TYT 700 250 746559 4,556.80 746558 4,853.50 

TYT TYT 700 300 746562 4,608.50 746561 4,908.20 

TYT TYT 700 400 746565 4,693.80 746564 4,997.70 

TYT TYT 700 700 746568 5,982.50 746567 6,369.50 

TYT TYT 800 300 746578 5,323.30 746577 5,658.30 

TYT TYT 800 400 746581 5,375.00 746580 5,713.20 

TYT TYT 800 700 746584 7,490.20 746583 7,968.80 

TYT TYT 800 800 746587 7,919.20 746586 8,420.40 

Socket 

Type 2 

Socket 

Type 2 


Epoxy 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket bends SMU SMU 40 11° 747604 140.80 747603 148.80 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket pieces TYT TYT 100 100 746591 349.40 746590 374.30 

with 45° socket branch TYT TYT 150 100 746595 462.70 746594 495.40 

(MMC) TYT TYT 150 150 746598 411.40 746597 440.70 

TYT TYT 200 150 746603 522.40 746602 559.80 

TYT TYT 200 200 746606 536.70 746605 575.20 

(MMK) SMU SMU 65 11° 747617 184.80 747616 194.80 

SMU SMU 80 11° 747625 142.40 747624 147.00 

SMU SMU 100 11° 747637 158.20 747636 161.90 

SMU SMU 125 11° 747649 195.80 747648 201.60 

SMU SMU 150 11° 747661 231.90 747660 238.40 

SMU SMU 200 11° 747673 346.60 747672 355.50 

SMU SMU 250 11° 747685 472.00 747684 480.00 

SMU SMU 300 11° 747697 709.90 747696 725.10 

SMU SMU 350 11° 747709 969.30 747708 992.90 

SMU SMU 400 11° 747721 1,065.00 747720 1,086.70 

Düker fittings


Item Socket 

Type 1 

Socket 

Type 2 

DN 1 Angle Item no. 

Epoxy 

– 95 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

Double-socket bends TYT TYT 80 11° 746786 74.50 746785 80.20 

(MMK) TYT TYT 100 11° 746641 85.40 746640 90.90 

TYT TYT 125 11° 746660 102.90 746659 109.20 

TYT TYT 150 11° 746672 130.50 746671 137.60 

TYT TYT 200 11° 746684 191.50 746683 202.50 

TYT TYT 250 11° 746696 268.00 746695 284.10 

TYT TYT 300 11° 746708 366.20 746707 388.50 

TYT TYT 350 11° 746720 653.10 746719 687.40 

TYT TYT 400 11° 746732 632.40 746731 671.30 

TYT TYT 500 11° 746750 1,422.20 746749 1,512.00 

TYT TYT 600 11° 746762 2,344.80 746761 2,494.40 

TYT TYT 700 11° 746774 3,781.00 746773 3,986.40 

TYT TYT 800 11° 746798 4,922.20 746797 5,182.00 

STO STO 500 11° 754314 3,164.20 754153 3,250.00 

STO STO 600 11° 754319 4,245.20 754158 4,376.50 

SMU SMU 40 22° 747606 166.00 747605 176.00 

SMU SMU 65 22° 747619 177.80 747618 189.60 

SMU SMU 80 22° 747628 140.20 747627 144.10 

SMU SMU 100 22° 747640 160.50 747639 165.60 

SMU SMU 125 22° 747652 202.20 747651 207.70 

SMU SMU 150 22° 747664 241.70 747663 247.70 

SMU SMU 200 22° 747676 362.40 747675 372.30 

SMU SMU 250 22° 747688 496.60 747687 505.40 

SMU SMU 300 22° 747700 697.90 747699 712.70 

SMU SMU 350 22° 747712 1,104.00 747711 1,135.20 

SMU SMU 400 22° 747724 1,137.30 747723 1,162.80 

TYT TYT 80 22° 746789 79.60 746788 84.20 

TYT TYT 100 22° 746644 88.60 746643 93.50 

TYT TYT 125 22° 746663 109.20 746662 116.50 

TYT TYT 150 22° 746675 135.20 746674 143.20 

TYT TYT 200 22° 746687 205.30 746686 217.30 

TYT TYT 250 22° 746699 276.00 746698 292.10 

TYT TYT 300 22° 746711 401.20 746710 425.80 

TYT TYT 350 22° 746723 720.30 746722 758.80 

TYT TYT 400 22° 746735 699.50 746734 742.50 

TYT TYT 500 22° 746753 1,564.10 746752 1,663.20 

TYT TYT 600 22° 746765 2,584.80 746764 2,751.30 

TYT TYT 700 22° 746777 4,191.60 746776 4,421.30 

TYT TYT 800 22° 746801 5,485.20 746800 5,778.30 

STO STO 500 22° 754315 3,384.40 754154 3,482.30 

STO STO 600 22° 754320 4,570.50 754159 4,721.40 


Gate Valves 


Valves 

3. Hydrants 












Item Socket 

Type 1 

Socket 

Type 2 


Epoxy 

– 96 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket bends SMU SMU 40 30° 747608 166.00 747607 176.00 

(MMK) SMU SMU 65 30° 747621 227.40 747620 240.60 

SMU SMU 80 30° 747631 148.30 747630 152.60 

SMU SMU 100 30° 747643 165.60 747642 170.70 

SMU SMU 125 30° 747655 205.50 747654 210.90 

SMU SMU 150 30° 747667 270.70 747666 279.10 

SMU SMU 200 30° 747679 365.30 747678 376.80 

SMU SMU 250 30° 747691 514.10 747690 525.80 

SMU SMU 300 30° 747703 687.00 747702 702.20 

SMU SMU 350 30° 747715 1,062.90 747714 1,092.50 

SMU SMU 400 30° 747727 1,168.60 747726 1,195.80 

TYT TYT 80 30° 746792 83.80 746791 89.30 

TYT TYT 100 30° 746647 90.40 746646 96.60 

TYT TYT 125 30° 746666 112.20 746665 119.50 

TYT TYT 150 30° 746678 138.40 746677 146.30 

TYT TYT 200 30° 746690 211.20 746689 224.90 

TYT TYT 250 30° 746702 283.60 746701 300.80 

TYT TYT 300 30° 746714 414.80 746713 440.50 

TYT TYT 350 30° 746726 746.70 746725 787.20 

TYT TYT 400 30° 746738 728.60 746737 773.60 

TYT TYT 500 30° 746756 1,568.70 746755 1,667.80 

TYT TYT 600 30° 746768 2,655.80 746767 2,826.60 

TYT TYT 700 30° 746780 4,311.30 746779 4,547.90 

TYT TYT 800 30° 746804 5,540.60 746803 5,893.20 

STO STO 500 30° 754316 3,706.10 754155 3,824.20 

STO STO 600 30° 754321 4,662.30 754160 4,819.40 

SMU SMU 40 45° 747610 157.10 747609 168.20 

SMU SMU 65 45° 747623 180.70 747622 193.90 

SMU SMU 80 45° 747634 145.00 747633 148.90 

SMU SMU 100 45° 747646 167.10 747645 172.00 

SMU SMU 125 45° 747658 213.50 747657 220.30 

SMU SMU 150 45° 747670 252.90 747669 260.20 

SMU SMU 200 45° 747682 382.90 747681 394.00 

SMU SMU 250 45° 747694 550.90 747693 563.90 

SMU SMU 300 45° 747706 720.20 747705 737.20 

SMU SMU 350 45° 747718 1,120.30 747717 1,152.60 

SMU SMU 400 45° 747730 1,229.20 747729 1,260.80 

Düker fittings


Item Socket 

Type 1 

Socket 

Type 2 


Epoxy 

– 97 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

Double-socket bends TYT TYT 80 45° 746795 82.70 746794 87.90 

(MMK) TYT TYT 100 45° 746650 93.30 746649 99.50 

TYT TYT 125 45° 746669 118.20 746668 125.20 

TYT TYT 150 45° 746681 145.80 746680 155.10 

TYT TYT 200 45° 746693 223.50 746692 236.70 

TYT TYT 250 45° 746705 331.00 746704 351.50 

TYT TYT 300 45° 746717 445.40 746716 473.10 

TYT TYT 350 45° 746729 804.10 746728 847.50 

TYT TYT 400 45° 746741 784.90 746740 834.30 

TYT TYT 500 45° 746759 1,658.60 746758 1,764.10 

TYT TYT 600 45° 746771 2,824.80 746770 3,008.00 

TYT TYT 700 45° 746783 5,050.40 746782 5,331.00 

TYT TYT 800 45° 746807 6,630.20 746806 6,991.60 

Item Socket 

Type 1 

STO STO 500 45° 754317 3,977.10 754156 4,110.30 

STO STO 600 45° 754322 4,892.30 754162 5,063.00 

Socket 

Type 2 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket SMU SMU 40 90° 747733 111.60 747732 119.00 

bends 90° (MMQ) SMU SMU 65 90° 747737 193.00 747736 207.90 

SMU SMU 80 90° 747739 160.90 747738 167.20 

SMU SMU 100 90° 747742 175.30 747741 181.30 

SMU SMU 125 90° 747745 244.50 747744 250.90 

SMU SMU 150 90° 747748 286.00 747747 294.60 

SMU SMU 200 90° 747751 465.70 747750 483.10 

SMU SMU 250 90° 747754 703.30 747753 732.50 

SMU SMU 300 90° 747757 1,141.70 747756 1,179.90 

TYT TYT 80 90° 746853 93.40 746852 100.40 

TYT TYT 100 90° 746818 105.40 746817 112.80 

TYT TYT 125 90° 746821 151.80 746820 161.80 

TYT TYT 150 90° 746824 171.70 746823 181.80 

TYT TYT 200 90° 746827 272.40 746826 290.00 

TYT TYT 250 90° 746830 398.90 746829 424.10 

TYT TYT 300 90° 746833 620.60 746832 660.00 

TYT TYT 350 90° 746836 1,515.30 746835 1,602.00 

TYT TYT 400 90° 746839 1,512.10 746838 1,612.80 

TYT TYT 500 90° 746844 2,297.50 746843 2,447.50 

TYT TYT 600 90° 746847 3,622.40 746846 3,860.60 

TYT TYT 700 90° 746850 6,800.60 746849 7,253.60 

TYT TYT 800 90° 746856 7,011.40 746855 7,467.40 

STO STO 500 90° 754318 3,625.80 754157 3,775.30 

STO STO 600 90° 754323 4,924.80 754163 5,147.90 


Gate Valves 


Valves 

3. Hydrants 












Item Socket 

Type 1 

Socket 

Type 2 


Epoxy 

– 98 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket tapers SMU SMU 50 40 747761 209.10 747760 226.00 

(MMR) SMU SMU 80 40 747764 305.30 747763 322.00 

SMU SMU 80 50 747767 154.60 747766 160.70 

SMU SMU 80 65 747770 238.50 747769 250.10 

SMU SMU 100 50 747775 162.80 747774 168.40 

SMU SMU 100 65 747778 171.00 747777 178.00 

SMU SMU 100 80 747781 154.50 747780 159.80 

SMU SMU 125 80 754102 217.90 747783 225.30 

SMU SMU 125 100 747786 226.00 747785 234.80 

SMU SMU 150 80 747790 230.40 747789 238.20 

SMU SMU 150 100 747793 239.80 747792 247.20 

SMU SMU 150 125 747796 251.70 747795 260.50 

SMU SMU 200 100 747800 337.30 747799 349.50 

SMU SMU 200 125 747803 349.30 747802 361.50 

SMU SMU 200 150 747806 360.20 747805 372.20 

SMU SMU 250 150 747811 433.60 747810 448.80 

SMU SMU 250 200 747814 464.10 747813 479.80 

SMU SMU 300 200 747821 597.00 747820 618.20 

SMU SMU 300 250 747824 642.40 747823 664.30 

SMU SMU 350 300 747829 1,353.50 747828 1,404.00 

SMU SMU 400 300 747836 1,469.10 747835 1,521.50 

SMU SMU 400 350 747839 1,296.50 747838 1,334.80 

TYT TYT 100 80 746860 90.10 746859 95.40 

TYT TYT 125 80 746866 141.90 746865 150.60 

TYT TYT 125 100 746863 145.10 746862 155.10 

TYT TYT 150 80 746875 156.60 746874 166.20 

TYT TYT 150 100 746869 161.30 746868 170.80 

TYT TYT 150 125 746872 166.20 746871 177.40 

TYT TYT 200 100 746878 224.00 746877 238.20 

TYT TYT 200 125 746881 229.10 746880 242.80 

TYT TYT 200 150 746884 232.40 746883 246.30 

TYT TYT 250 150 746893 298.50 746892 316.80 

TYT TYT 250 200 746896 309.60 746895 329.20 

TYT TYT 300 150 746900 422.80 746899 448.50 

TYT TYT 300 200 746903 414.50 746902 440.40 

TYT TYT 300 250 746906 437.10 746905 464.20 

TYT TYT 350 200 746909 994.70 746908 1,061.10 

TYT TYT 350 250 746911 998.20 754164 1,064.50 

TYT TYT 350 300 746914 1,056.00 746913 1,125.40 

TYT TYT 400 250 746919 782.20 746918 832.40 

TYT TYT 400 300 746922 827.10 746921 881.10 

TYT TYT 400 350 746925 1,006.10 746924 1,070.80 

TYT TYT 500 300 746930 1,911.00 746929 2,014.60 

TYT TYT 500 400 746935 2,065.70 746934 2,180.90 

TYT TYT 600 400 746939 2,726.30 746938 2,878.80 

TYT TYT 600 500 746944 2,632.90 746943 2,777.90 

TYT TYT 700 600 746948 3,450.30 746947 3,639.50 

Düker fittings


Item Socket 

Type 1 

Item Socket 

Type 

Socket 

Type 2 


Epoxy 

DN Item no. 

Epoxy 

– 99 – 

€ 

Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

Item no. 

Enamel 


€ 

Enamel 

Single-socket bends SMU SMU 40 90° 747847 105.10 754683 114.90 

90° (MQ) SMU SMU 80 90° 747851 156.30 747850 164.50 

SMU SMU 100 90° 747854 188.40 747853 198.80 

SMU SMU 125 90° 747857 240.60 747856 252.70 

SMU SMU 150 90° 747860 311.20 747859 328.30 

SMU SMU 200 90° 747863 473.40 747862 495.00 

TYT TYT 80 90° 746989 128.90 746988 137.80 

TYT TYT 100 90° 746966 156.30 746965 167.70 

TYT TYT 125 90° 746969 201.70 746968 214.70 

TYT TYT 150 90° 746972 258.00 746971 275.90 

TYT TYT 200 90° 746975 388.40 746974 415.30 

TYT TYT 250 90° 746978 1,120.40 746977 1,186.70 

TYT TYT 300 90° 746981 1,439.10 746980 1,523.50 

Item DN Item no. 

Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-flanged 50 862905 101.70 862896 106.60 

duckfoot bends 65 870073 188.80 728281 198.00 

(N) 80 750046 96.10 750087 103.80 

100 862998 118.90 862994 126.70 

125 873659 195.30 874923 207.30 

150 877562 233.10 863136 247.10 

200 878947 410.50 866068 435.20 

250 866078 717.70 866077 760.90 

300 874511 817.90 874922 867.90 

350 709229 1,993.80 741690 2,113.30 

400 706994 2,581.70 736707 2,736.50 

500 711278 3,876.10 741692 4,106.50 

600 715789 5,598.90 741693 5,931.70 

700 715800 7,918.60 741694 8,469.40 

800 718922 10,397.70 741695 11,121.90 

€ 

Enamel 

Plugs (P) SMUP 40 747872 83.40 

SMUP 80 747874 93.50 747873 97.50 

SMUP 100 747876 104.50 747875 110.80 

SMUP 150 747878 162.10 747877 175.50 

SMUP 200 747880 229.60 747879 243.70 

SMUP 250 774879 373.40 747881 393.30 

TYT 80 774880 30.70 774887 34.70 

TYT 100 774881 36.70 774888 43.00 

TYT 150 774882 57.50 774889 70.90 

TYT 200 774883 80.40 774890 94.50 

TYT 250 774884 128.50 774891 148.40 

TYT 300 774885 182.40 774892 207.40 


Gate Valves 


Valves 

3. Hydrants 












Item DN € 

Epoxy 

Screw plugs (PX) 40 45.50 

(including rubber gasket and threaded hole) 


Epoxy 

Item DN 1 DN 2 Item no. 

Epoxy 

– 100 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

All flanged tees 40 40 867060 105.50 867094 111.10 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-flanged bends 40 867679 66.60 867800 71.90 

90° (Q) 50 867822 78.30 867827 81.50 

65 867847 94.40 867842 99.50 

80 867896 96.10 867893 103.80 

100 867924 108.20 867916 117.00 

125 867941 143.40 867939 154.10 

150 867961 176.90 867956 189.80 

200 867993 306.40 867984 329.00 

250 868042 468.00 868040 497.00 

300 868069 570.40 868067 604.80 

350 704035 1,010.10 741696 1,070.90 

400 868093 1,279.20 868091 1,356.30 

500 868278 2,399.70 868261 2,543.60 

600 705976 4,741.50 741697 5,023.90 

700 715799 6,032.30 741698 6,391.10 

800 733938 6,985.10 741699 7,401.20 

(T) 50 40 867097 131.50 867092 137.20 

50 50 867121 109.00 867107 114.20 

65 40 870555 153.60 704519 160.70 

65 50 870556 145.30 867141 151.60 

65 65 867152 137.50 867151 143.50 

80 40 701268 127.20 867158 136.30 

80 50 867172 114.40 867165 122.30 

80 65 702710 132.30 870480 141.70 

80 80 867202 118.70 867195 127.70 

100 40 875447 137.10 867232 146.80 

100 50 867245 130.50 867243 141.00 

100 65 874191 144.80 867263 155.10 

100 80 867271 123.50 867267 133.50 

100 100 867290 126.60 867284 136.40 

125 40 867310 202.70 867308 216.80 

125 50 867318 202.70 867316 216.80 

125 80 867333 164.30 867332 177.10 

125 100 867710 175.60 867338 187.90 

125 125 867717 185.20 867715 198.90 

Düker fittings



Epoxy 

– 101 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

All flanged tees 150 50 870486 224.80 867735 241.60 

(T) 150 65 867748 275.90 867747 296.20 

150 80 867758 205.70 867753 220.00 

150 100 867775 205.70 867768 220.00 

150 125 875289 219.90 867787 235.50 

150 150 867802 216.70 867797 232.40 

200 80 867836 310.70 867835 332.40 

200 100 867859 312.20 867857 335.20 

200 125 867883 315.40 867882 338.30 

200 150 868102 315.40 868100 338.30 

200 200 868117 326.30 868114 348.90 

250 80 876792 554.90 868144 594.60 

250 100 868159 554.90 868157 594.60 

250 125 868175 633.10 868173 678.30 

250 150 868193 576.40 868189 616.70 

250 200 875291 609.10 868223 651.60 

250 250 868262 614.50 868258 658.20 

300 80 874212 634.50 868474 679.00 

300 100 874376 646.50 868483 691.80 

300 150 868498 695.40 868497 744.30 

300 200 875292 695.40 868513 744.30 

300 250 876793 767.10 868521 820.70 

300 300 868533 767.10 868531 820.70 

350 80 868546 1,352.20 716262 1,432.80 

350 100 703961 1,428.80 726792 1,513.90 

350 150 725304 1,438.90 737060 1,524.80 

350 200 703963 1,438.90 874359 1,524.80 

350 250 738253 1,861.00 868567 1,972.30 

350 300 868572 1,861.00 741700 1,972.30 

350 350 703965 1,861.00 868575 1,972.30 

400 80 705787 1,732.10 868582 1,853.10 

400 100 868588 1,732.10 868587 1,853.10 

400 150 703990 1,743.00 868597 1,865.10 

400 200 868612 1,743.00 868610 1,865.10 

400 250 712331 1,960.90 868623 2,097.70 

400 300 701360 2,071.90 868630 2,216.50 

400 400 868639 2,071.90 868638 2,216.50 

500 100 868657 2,701.80 868656 2,863.20 

500 150 868661 2,762.50 868660 2,928.10 

500 200 868667 2,762.50 868664 2,928.10 

500 250 877176 2,762.50 868675 2,928.10 

500 300 868679 3,000.70 868678 3,179.30 

500 350 723202 3,000.70 741701 3,179.30 

500 400 709782 3,000.70 868689 3,179.30 

500 500 868695 3,140.30 868694 3,328.10 


Gate Valves 


Valves 

3. Hydrants 













Epoxy 

– 102 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

All flanged tees 600 100 705297 4,652.90 868705 4,930.50 

(T) 600 150 868711 4,652.90 868710 4,930.50 

600 200 868715 4,652.90 868714 4,930.50 

600 250 741825 4,758.00 704332 5,041.30 

600 300 868719 4,758.00 868718 5,041.30 

600 350 736574 4,758.00 741702 5,041.30 

600 400 868725 4,758.00 868724 5,041.30 

600 500 868732 4,818.80 868731 5,106.20 

600 600 700649 4,818.80 868735 5,106.20 

700 100 729447 5,897.90 705408 6,249.70 

700 200 873798 5,897.90 701704 6,249.70 

700 400 709485 6,039.00 741703 6,398.30 

700 500 868754 6,137.60 708851 6,502.90 

700 600 711225 6,137.60 741704 6,502.90 

700 700 702849 6,137.60 730992 6,502.90 

800 100 711961 8,625.70 741705 9,139.60 

800 200 877991 8,625.70 741706 9,139.60 

800 300 711960 8,992.10 741707 9,527.40 

800 400 705183 8,992.10 868779 9,527.40 

800 500 729287 9,296.00 741708 9,848.40 

800 600 711959 9,296.00 721387 9,848.40 

800 700 726906 9,722.80 741709 10,300.60 

800 800 877990 9,722.80 741710 10,300.60 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

All flanged cross tees 50 50 874903 244.00 868217 255.20 

(TT) 80 80 868246 273.70 868241 290.40 

100 80 700894 393.00 709749 421.30 

100 100 868282 303.20 868279 321.80 

125 125 702729 486.60 868304 516.60 

150 100 868332 594.50 868327 636.00 

150 150 868345 573.50 868342 607.80 

200 100 874378 929.70 868355 994.60 

200 150 868368 971.50 868366 1,040.00 

200 200 874379 755.40 868382 801.00 

250 250 868425 1,455.20 868423 1,542.40 

300 300 700654 2,013.80 868456 2,154.00 

350 350 726608 2,729.20 874911 2,918.80 

400 400 704071 3,145.00 736487 3,364.80 

500 500 717598 4,494.90 722431 4,807.30 

Düker fittings


Item Socket 

Type 1 

Socket 

Type 2 

DN Item no. 

Epoxy 

– 103 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

Collars SMU SMU 40 747887 104.10 747886 106.60 

(U) SMU SMU 50 747889 131.80 747888 136.10 

SMU SMU 65 747891 149.10 747890 154.10 

SMU SMU 80 747893 132.90 747892 135.70 

SMU SMU 100 747896 159.20 747895 163.20 

SMU SMU 125 747900 200.40 747899 206.20 

SMU SMU 150 747903 234.30 747902 240.80 

SMU SMU 200 747908 332.20 747907 341.10 

SMU SMU 250 747912 462.90 747911 474.90 

SMU SMU 300 747916 612.10 747915 628.20 

SMU SMU 350 747920 871.60 747919 897.40 

SMU SMU 400 747924 1,047.10 747923 1,077.70 

SMU SMU 500 747931 2,359.00 747930 2,436.50 

STO STO 400 754324 1,699.00 754166 1,799.90 

STO STO 500 754325 2,478.70 754168 2,548.70 

STO STO 600 754326 3,128.40 754169 3,225.70 

STO STO 700 754327 5,195.00 754170 5,373.30 

STO STO 800 754328 6,298.20 754171 6,463.30 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Blank flanges 40 757740 18.90 762984 22.30 

(X) 50 757744 21.20 757741 23.10 

65 757753 26.10 757752 28.20 

80 869808 24.00 869807 29.50 

100 869819 26.80 869818 32.30 

125 869832 39.80 869831 49.10 

150 869839 50.40 869838 60.80 

200 869855 71.70 869854 87.50 

250 869877 137.10 869876 167.60 

300 869899 181.50 869897 220.80 

350 703743 238.60 869950 289.70 

400 869962 307.90 869961 374.40 

500 869992 520.00 869983 557.60 

600 871251 795.90 870002 852.10 

700 870010 1,546.70 727943 1,879.80 

800 709855 1,963.80 741711 2,387.20 

Item Ø € 

Epoxy 

Surcharge for threaded holes in blank flanges up to 1“ 16.50 

1 1 ⁄4“, 1 1 ⁄2“ 19.40 

2“ 24.10 

2 1 ⁄2“, 3“, 4“ on request 

€ 

Enamel 

not 

available 

with 

enamel 


Gate Valves 


Valves 

3. Hydrants 













Epoxy 

– 104 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-flanged hatchboxes 80 767318 1,174.40 767315 1,256.40 

100 767320 1,274.60 873693 1,364.40 

125 754671 1,519.40 767407 1,626.00 

150 767412 1,438.00 767410 1,538.90 

200 767430 2,053.90 767436 2,197.10 

250 754673 2,605.10 741712 2,786.80 

300 767455 3,222.20 767452 3,446.20 

350 754674 3,710.40 741713 3,969.30 

400 767474 4,929.90 741714 5,272.70 

500 754676 5,841.90 741715 6,248.50 


Epoxy 

€ 

Epoxy 

Transition flange 4/8 holes 80 869414 45.10 


Epoxy 

€ 

Epoxy 

Bellmouths 80 703106 130.50 

100 700094 148.30 

150 700052 207.80 

200 875566 288.40 

250 709230 433.30 

300 714207 552.70 

350 741826 1,298.00 

400 869487 890.80 

500 712255 1,975.30 

600 736819 3,576.60 

Item DN Item no. € 

Screwed socket connection with 

Düker SPEZIAL thrust-resistant joint 

consisting of: 

screw ring with gliding chamber. locking ring. gliding ring 

and sealing gasket 

40 736549 66.60 

50 736550 78.10 

65 736551 92.60 


Screwed socket connection with Düker SMU 80 735739 105.50 

thrust-resistant joint 

100 735740 117.10 

125 735741 134.40 

DN 80 up to DN 250 consisting of: screw ring with gliding chamfer. 150 735742 153.90 

locking ring. SPEZIAL screw ring. gliding ring and sealing gasket 200 735743 199.10 

250 735744 261.40 

DN 300 up to DN 400 consisting of: screw ring with gliding chamfer. 300 735745 387.60 

locking ring. SPEZIAL screw ring. gliding ring and sealing gasket 400 735746 565.00 

Düker fittings


– 105 – 



TYTON SIT PLUS ® 

including marking ring EPDM 

80 718291 21.40 

100 718292 22.80 

125 718293 30.00 

150 718294 31.30 

200 718295 62.10 

250 718296 74.80 

300 718297 107.10 

350 718298 193.50 

400 718299 236.70 

500 718300 330.90 

600 718301 441.00 


Gate Valves 


Valves 

3. Hydrants 












– 106 – 

Düker fittings


– 107 – 


8. Pressure Pipe Fittings with Novo Socket 


Gate Valves 


Valves 

3. Hydrants 












Item Connection DN Item no. 

Epoxy 

– 108 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Flanged socket NOVO-SIT ® 80 747987 165.20 747986 174.60 

duckfoot bends (EN) NOVO-SIT ® 100 747983 194.20 747982 204.50 

Item Connection DN Item no. 

Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Flanged sockets NOVO-SIT ® 80 748090 108.10 748089 113.60 

(EU) NOVO-SIT ® 100 747990 126.70 747989 132.00 

NOVO-SIT ® 125 747998 159.40 747997 167.60 

NOVO-SIT ® 150 748009 192.90 748008 201.90 

NOVO-SIT ® 200 748019 275.60 748018 285.50 

NOVO-SIT ® 250 748032 387.40 748031 401.60 

NOVO-SIT ® 300 748044 543.80 748043 563.80 

NOVO-SIT ® 400 748056 1,184.80 748055 1,237.10 

NOVO-SIT ® 500 748066 1,933.90 748065 2,013.80 

NOVO-SIT ® 600 748074 2,655.60 748073 2,773.70 

NOVO-SIT ® 700 748082 4,414.60 748081 4,617.40 

NOVO-SIT ® 800 748086 4,505.00 754555 4,708.10 

Item Connection DN Angle Item no. 

Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Single socket bends NOVO-SIT ® 80 11° 748462 140.30 748461 147.70 

(MK) NOVO-SIT ® 100 11° 748360 153.40 748359 161.90 

NOVO-SIT ® 125 11° 748372 197.20 748371 207.50 

NOVO-SIT ® 150 11° 748382 245.50 748381 258.50 

NOVO-SIT ® 200 11° 748395 371.10 748394 390.60 

NOVO-SIT ® 250 11° 748408 530.40 748407 558.20 

NOVO-SIT ® 300 11° 748421 751.00 748420 791.00 

NOVO-SIT ® 80 22° 748465 144.70 748464 152.00 

NOVO-SIT ® 100 22° 748363 159.20 748362 167.40 

NOVO-SIT ® 125 22° 748375 214.70 748374 226.00 

NOVO-SIT ® 150 22° 748385 299.50 748384 315.30 

NOVO-SIT ® 200 22° 748399 495.00 748398 522.60 

NOVO-SIT ® 250 22° 748411 520.10 748410 546.70 

NOVO-SIT ® 300 22° 748424 737.70 748423 776.90 

NOVO-SIT ® 80 30° 748468 140.30 748467 147.70 

NOVO-SIT ® 100 30° 748366 182.70 748365 193.00 

NOVO-SIT ® 125 30° 748377 251.20 748376 265.60 

NOVO-SIT ® 150 30° 748388 349.10 748387 369.20 

NOVO-SIT ® 200 30° 748402 423.50 748401 445.80 

NOVO-SIT ® 250 30° 748414 623.90 748413 659.20 

NOVO-SIT ® 300 30° 748427 885.10 748426 934.40 

Düker fittings



Epoxy 

– 109 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

Single socket bends NOVO-SIT ® 80 45° 748471 179.60 748470 190.30 

(MK) NOVO-SIT ® 100 45° 748369 221.90 748368 234.30 

NOVO-SIT ® 125 45° 748379 245.50 748378 258.50 

NOVO-SIT ® 150 45° 748391 333.10 748390 352.10 

NOVO-SIT ® 200 45° 748405 543.20 748404 575.10 

NOVO-SIT ® 250 45° 748417 623.90 748416 659.20 

NOVO-SIT ® 300 45° 748430 885.10 748429 934.40 

Item Connection DN 1 DN 2 Item no. 

Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket tees NOVO-SIT ® 80 40 754554 225.00 748334 235.90 

with flanged branch NOVO-SIT ® 80 50 748337 226.40 748336 237.20 

(MMA) NOVO-SIT ® 80 80 748341 206.10 748340 216.00 

NOVO-SIT ® 100 40 748097 220.60 748096 230.00 

NOVO-SIT ® 100 50 748100 220.60 748099 230.00 

NOVO-SIT ® 100 80 748103 226.30 748102 233.70 

NOVO-SIT ® 100 100 748094 235.10 748093 242.30 

NOVO-SIT ® 125 40 748112 277.70 748111 290.10 

NOVO-SIT ® 125 50 748115 286.60 748114 298.40 

NOVO-SIT ® 125 80 748118 277.70 748117 290.10 

NOVO-SIT ® 125 100 748106 288.20 748105 301.50 

NOVO-SIT ® 125 125 748109 302.70 748108 316.90 

NOVO-SIT ® 150 40 748131 361.10 748130 376.80 

NOVO-SIT ® 150 50 748134 400.60 748133 419.30 

NOVO-SIT ® 150 80 748137 368.20 748136 380.30 

NOVO-SIT ® 150 100 748121 371.10 748120 383.10 

NOVO-SIT ® 150 125 748124 418.00 748123 437.80 

NOVO-SIT ® 150 150 748128 375.40 748127 387.60 

NOVO-SIT ® 200 40 748155 520.40 748154 542.70 

NOVO-SIT ® 200 50 748158 520.40 748157 542.70 

NOVO-SIT ® 200 80 748161 530.50 748160 548.10 

NOVO-SIT ® 200 100 748141 531.80 748140 549.60 

NOVO-SIT ® 200 150 748145 557.10 748144 576.80 

NOVO-SIT ® 200 200 748148 603.30 748147 625.70 

NOVO-SIT ® 250 80 748181 676.60 748180 698.90 

NOVO-SIT ® 250 100 748165 679.40 748164 701.80 

NOVO-SIT ® 250 150 748170 731.60 748169 756.30 

NOVO-SIT ® 250 200 748173 786.90 748172 815.00 

NOVO-SIT ® 250 250 748176 891.00 748175 925.50 

NOVO-SIT ® 300 80 748206 913.30 748205 941.30 

NOVO-SIT ® 300 100 748184 914.90 748183 942.90 

NOVO-SIT ® 300 150 748187 920.70 748186 949.90 

NOVO-SIT ® 300 200 748190 977.20 748189 1,008.60 

NOVO-SIT ® 300 250 748195 1,190.20 754556 1,235.20 

NOVO-SIT ® 300 300 748200 1,190.20 748199 1,235.20 


Gate Valves 


Valves 

3. Hydrants 













Epoxy 

– 110 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket tees NOVO-SIT ® 400 80 748237 1,884.30 748236 1,935.30 

with flanged branch NOVO-SIT ® 400 100 748209 1,887.30 748208 1,938.20 

(MMA) NOVO-SIT ® 400 150 748215 1,903.60 748213 1,955.40 

NOVO-SIT ® 400 200 748218 2,128.50 748217 2,194.50 

NOVO-SIT ® 400 300 748225 2,268.10 748224 2,342.30 

NOVO-SIT ® 400 400 748231 2,402.10 748230 2,484.10 

NOVO-SIT ® 500 80 748267 4,045.60 748266 4,174.50 

NOVO-SIT ® 500 100 748241 4,045.60 748240 4,174.50 

NOVO-SIT ® 500 150 748245 4,197.30 748244 4,334.80 

NOVO-SIT ® 500 200 748248 4,197.30 748247 4,334.80 

NOVO-SIT ® 500 300 748253 4,733.00 748252 4,902.40 

NOVO-SIT ® 500 400 748258 5,015.60 754703 5,201.90 

NOVO-SIT ® 500 500 748262 5,057.40 754557 5,246.50 

NOVO-SIT ® 600 100 748270 5,070.70 748269 5,236.30 

NOVO-SIT ® 600 150 748273 5,070.70 754558 5,236.30 

NOVO-SIT ® 600 200 748277 5,070.70 748276 5,236.30 

NOVO-SIT ® 600 250 748283 5,644.90 754559 5,844.20 

NOVO-SIT ® 600 300 748288 5,644.90 748287 5,844.20 

NOVO-SIT ® 600 400 748293 6,279.00 754560 6,516.00 

NOVO-SIT ® 600 500 748296 6,713.40 748295 6,976.20 

NOVO-SIT ® 600 600 748299 6,713.40 754561 6,976.20 

NOVO-SIT ® 700 150 748303 7,896.50 754562 8,237.00 

NOVO-SIT ® 700 200 748306 7,896.50 754563 8,237.00 

NOVO-SIT ® 700 400 748311 9,052.60 754564 9,472.90 

NOVO-SIT ® 700 500 748313 9,405.70 754565 9,850.60 

NOVO-SIT ® 700 600 748315 9,405.70 754566 9,850.60 

NOVO-SIT ® 700 700 748317 10,131.20 754573 10,626.80 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 


with socket branch NOVO-SIT ® 100 80 748478 259.20 748477 265.40 

(MMB) NOVO-SIT ® 100 100 748474 268.10 748473 273.90 

NOVO-SIT ® 125 80 748489 311.60 748488 322.90 

NOVO-SIT ® 125 100 748481 320.20 748480 331.30 

NOVO-SIT ® 125 125 748484 356.90 748483 369.90 

NOVO-SIT ® 150 80 748504 384.70 748503 394.80 

NOVO-SIT ® 150 100 748492 392.00 748491 401.80 

NOVO-SIT ® 150 125 748495 467.90 748494 486.10 

NOVO-SIT ® 150 150 748498 439.80 748497 450.80 

NOVO-SIT ® 200 80 748521 530.60 748520 545.50 

NOVO-SIT ® 200 100 748507 539.40 748506 554.00 

NOVO-SIT ® 200 125 748510 625.80 748509 650.80 

NOVO-SIT ® 200 150 748513 593.20 748512 610.00 

NOVO-SIT ® 200 200 748516 658.80 748515 677.50 

Düker fittings



Epoxy 

– 111 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 


with socket branch NOVO-SIT ® 250 100 748524 761.50 748523 785.10 

(MMB) NOVO-SIT ® 250 150 748529 830.10 748528 855.60 

NOVO-SIT ® 250 200 748532 906.30 748531 934.20 

NOVO-SIT ® 250 250 748535 931.50 748534 958.90 

NOVO-SIT ® 300 80 748558 1,034.20 748557 1,066.20 

NOVO-SIT ® 300 100 748541 1,040.00 748540 1,071.90 

NOVO-SIT ® 300 150 748546 1,066.80 748545 1,099.30 

NOVO-SIT ® 300 200 748549 1,168.10 748548 1,204.10 

NOVO-SIT ® 300 250 748552 1,375.20 748551 1,421.90 

NOVO-SIT ® 300 300 748555 1,419.80 748554 1,465.00 

NOVO-SIT ® 400 100 748561 2,555.10 748560 2,668.60 

NOVO-SIT ® 400 150 748564 2,572.80 748563 2,686.00 

NOVO-SIT ® 400 200 748567 2,596.20 748566 2,708.80 

NOVO-SIT ® 400 250 748570 2,667.90 748569 2,784.20 

NOVO-SIT ® 400 300 748573 2,803.60 748572 2,924.80 

NOVO-SIT ® 400 400 748576 3,806.80 748575 3,981.00 

NOVO-SIT ® 500 100 748580 3,780.40 754574 3,928.30 

NOVO-SIT ® 500 200 748584 4,773.10 748583 4,987.30 

NOVO-SIT ® 500 300 748586 4,801.20 754576 5,010.40 

NOVO-SIT ® 500 400 748588 5,344.70 754580 5,575.40 

NOVO-SIT ® 500 500 748590 6,042.70 754584 6,296.80 

NOVO-SIT ® 600 600 748601 7,676.60 754588 8,007.50 

NOVO-SIT ® 700 250 748606 8,126.40 754589 8,473.20 

NOVO-SIT ® 700 300 748608 8,228.50 754590 8,578.30 

NOVO-SIT ® 700 400 748610 8,513.60 754592 8,866.80 

NOVO-SIT ® 700 700 748613 10,949.40 754593 11,397.00 


Gate Valves 


Valves 

3. Hydrants 













Epoxy 

– 112 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket bends NOVO-SIT ® 80 11° 748814 140.50 748813 144.90 

(MMK) NOVO-SIT ® 100 11° 748635 160.70 748634 166.20 

NOVO-SIT ® 125 11° 748651 196.10 748650 202.10 

NOVO-SIT ® 150 11° 748667 245.90 748666 253.20 

NOVO-SIT ® 200 11° 748683 362.80 748682 374.00 

NOVO-SIT ® 250 11° 748699 484.20 748698 499.10 

NOVO-SIT ® 300 11° 748714 694.60 748713 716.50 

NOVO-SIT ® 400 11° 748735 1,425.20 748734 1,463.80 

NOVO-SIT ® 500 11° 748751 3,127.80 748750 3,234.20 

NOVO-SIT ® 600 11° 748767 4,469.30 748766 4,645.10 

NOVO-SIT ® 700 11° 748783 7,037.10 748782 7,317.40 

NOVO-SIT ® 800 11° 748799 7,905.10 748798 8,234.20 

NOVO-SIT ® 80 22° 748817 147.70 748816 153.70 

NOVO-SIT ® 100 22° 748639 168.10 748638 173.30 

NOVO-SIT ® 125 22° 748655 203.40 748654 210.60 

NOVO-SIT ® 150 22° 748671 257.50 748670 266.00 

NOVO-SIT ® 200 22° 748687 380.20 748686 392.50 

NOVO-SIT ® 250 22° 748703 509.10 748702 526.20 

NOVO-SIT ® 300 22° 748718 736.80 748717 762.10 

NOVO-SIT ® 400 22° 748739 1,515.70 748738 1,560.20 

NOVO-SIT ® 500 22° 748755 3,308.90 748754 3,428.70 

NOVO-SIT ® 600 22° 748771 4,759.70 748770 4,955.70 

NOVO-SIT ® 700 22° 748787 7,522.80 748786 7,836.70 

NOVO-SIT ® 800 22° 748802 8,099.40 748801 8,441.30 

NOVO-SIT ® 80 30° 748820 149.10 748819 154.90 

NOVO-SIT ® 100 30° 748643 171.00 748642 176.20 

NOVO-SIT ® 125 30° 748659 206.30 748658 213.30 

NOVO-SIT ® 150 30° 748675 260.40 748674 268.70 

NOVO-SIT ® 200 30° 748691 387.60 748690 400.90 

NOVO-SIT ® 250 30° 748707 519.20 748706 537.60 

NOVO-SIT ® 300 30° 748722 755.90 748721 783.20 

NOVO-SIT ® 400 30° 748743 1,555.20 748742 1,602.70 

NOVO-SIT ® 500 30° 748759 3,314.70 748758 3,434.30 

NOVO-SIT ® 600 30° 748775 4,844.30 748774 5,046.40 

NOVO-SIT ® 700 30° 748791 7,665.80 748790 7,990.10 

NOVO-SIT ® 800 30° 748806 8,953.20 748805 9,355.20 

Düker fittings



Epoxy 

Item Connection DN Length Item no. 

Epoxy 

– 113 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

Double-socket NOVO-SIT ® 80 90° 748870 162.40 748869 169.00 

bends 90° (MMQ) NOVO-SIT ® 100 90° 748828 191.40 748827 198.80 

NOVO-SIT ® 125 90° 748832 247.10 748831 257.30 

NOVO-SIT ® 150 90° 748835 301.20 748834 312.80 

NOVO-SIT ® 200 90° 748839 464.90 748838 483.20 

NOVO-SIT ® 250 90° 748843 653.40 748842 680.80 

NOVO-SIT ® 300 90° 748846 1,012.80 748845 1,057.20 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket bends NOVO-SIT ® 80 45° 748824 153.50 748823 159.20 

(MMK) NOVO-SIT ® 100 45° 748647 175.20 748646 181.80 

NOVO-SIT ® 125 45° 748663 213.60 748662 220.40 

NOVO-SIT ® 150 45° 748679 269.00 748678 278.70 

NOVO-SIT ® 200 45° 748695 402.10 748694 416.50 

NOVO-SIT ® 250 45° 748710 579.10 748709 601.40 

NOVO-SIT ® 300 45° 748726 793.90 748725 823.10 

NOVO-SIT ® 400 45° 748747 1,629.60 748746 1,682.40 

NOVO-SIT ® 500 45° 748763 3,429.90 748762 3,557.90 

NOVO-SIT ® 600 45° 748779 5,048.70 748778 5,265.20 

NOVO-SIT ® 700 45° 748795 8,540.40 748794 8,925.30 

NOVO-SIT ® 800 45° 748810 8,804.40 748809 9,196.10 

NOVO-SIT ® 400 90° 748850 2,606.00 748849 2,726.90 

NOVO-SIT ® 500 90° 748854 4,285.20 748853 4,471.70 

NOVO-SIT ® 600 90° 748858 6,083.60 748857 6,371.90 

NOVO-SIT ® 700 90° 748862 9,799.80 748861 10,272.10 

NOVO-SIT ® 800 90° 748867 10,336.80 748866 10,835.10 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket tapers NOVO-SIT ® 100 80 748874 165.50 748873 169.30 

(MMR) NOVO-SIT ® 150 80 748889 260.80 748888 268.40 

NOVO-SIT ® 150 100 748883 269.90 748882 278.30 

NOVO-SIT ® 150 125 748886 275.00 748885 285.80 

NOVO-SIT ® 200 100 748892 363.50 748891 374.40 

NOVO-SIT ® 200 125 748895 367.00 748894 382.50 

NOVO-SIT ® 200 150 748898 371.10 748897 381.80 

NOVO-SIT ® 250 125 748903 464.90 748902 484.60 

NOVO-SIT ® 250 150 748906 488.90 748905 503.90 

NOVO-SIT ® 250 200 748909 520.30 748908 535.30 

NOVO-SIT ® 300 150 748913 661.60 748912 683.20 

NOVO-SIT ® 300 200 748916 684.10 748915 704.60 

NOVO-SIT ® 300 250 748919 733.30 748918 754.90 


Gate Valves 


Valves 

3. Hydrants 













Epoxy 

– 114 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket tapers NOVO-SIT ® 400 250 748925 1,391.30 748924 1,434.60 

(MMR) NOVO-SIT ® 400 300 748928 1,486.80 748927 1,532.20 

NOVO-SIT ® 500 300 748932 3,161.00 748931 3,279.30 

NOVO-SIT ® 500 400 748935 3,493.30 748934 3,613.60 

NOVO-SIT ® 600 400 748939 4,450.70 748938 4,616.40 

NOVO-SIT ® 600 500 748943 4,633.50 748942 4,832.90 

NOVO-SIT ® 700 600 748949 6,185.80 748948 6,444.60 

NOVO-SIT ® 800 600 748952 6,950.50 754594 7,256.30 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Single-socket NOVO-SIT ® 80 90° 748977 176.70 748976 187.40 

bends 90° (MQ) NOVO-SIT ® 100 90° 748956 214.70 748955 227.20 

NOVO-SIT ® 125 90° 748959 271.80 748958 286.80 

NOVO-SIT ® 150 90° 748962 349.10 748961 369.20 

NOVO-SIT ® 200 90° 748965 520.10 748964 549.60 

NOVO-SIT ® 250 90° 748968 1,382.80 748967 1,470.80 

NOVO-SIT ® 300 90° 748971 1,788.70 748970 1,900.90 

Düker fittings


for Plastic Pipelines 


– 115 – 



Gate Valves 


Valves 

3. Hydrants 













Epoxy 


Epoxy 

– 116 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Flanged socket 80 750656 124.10 750655 158.70 

duckfoot bends 100 750658 153.10 750657 196.20 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Flanged sockets 50 750632 38.40 750633 48.10 

(E-KS) 65 750635 38.40 750634 48.10 

80 750637 34.90 750636 48.30 

100 750639 38.80 750638 52.30 

125 750641 63.00 750640 79.10 

150 750643 65.70 750642 81.70 

200 750645 111.40 750644 136.80 

250 750649 196.10 750648 238.90 

300 750652 248.30 750651 303.20 

400 750654 833.90 754545 1,032.60 

(EN-KS) 150 750659 293.20 754657 378.40 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Flanged spigots 50 868900 38.50 711202 49.70 

(F-KS) 65 868953 48.30 711203 61.00 

80 868956 40.10 868955 52.10 

100 868966 46.80 868957 60.10 

125 868968 68.10 868967 86.80 

150 868970 72.20 868969 90.90 

200 869574 109.60 869573 136.30 

250 869656 269.90 869655 337.40 

300 869658 316.40 869657 395.10 

400 726079 787.10 873082 984.60 


Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double socket tees 50 50 750680 64.90 754334 88.30 

with flanged branch 65 50 750681 83.00 754335 110.50 

(MMA-KS) 65 65 750682 76.90 754336 102.70 

80 50 750683 77.00 754337 102.80 

80 65 750684 94.60 754338 125.30 

80 80 750686 69.90 750685 92.60 

100 50 750687 94.50 754547 125.00 

100 65 750688 101.70 754339 134.50 

100 80 750690 80.50 750689 109.90 

100 100 750692 87.20 750691 115.10 

Düker fittings



Epoxy 

– 117 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

Double socket tees 125 50 754522 156.00 754340 203.70 

with flanged branch 125 65 750693 156.00 754341 203.70 

(MMA-KS) 125 80 750695 114.10 750694 148.80 

125 100 750697 126.10 750696 159.60 

125 125 750699 139.50 750698 173.00 

150 50 750701 186.70 754342 233.70 

150 65 750702 186.70 754353 233.70 

150 80 750704 127.40 750703 166.10 

150 100 750706 128.70 750705 167.60 

150 125 750707 182.60 754548 235.70 

150 150 750709 167.60 750708 210.30 

200 80 750711 192.10 750710 244.20 

200 100 750713 210.80 750712 264.30 

200 125 754540 340.20 754354 410.10 

200 150 750714 256.30 754355 319.10 

200 200 750715 283.00 754356 353.90 

250 80 750718 525.90 750717 655.70 

250 100 750720 577.20 750719 721.70 

250 150 750721 623.70 754357 781.20 

250 200 750722 808.60 754358 1,008.90 

250 250 750723 958.60 754360 1,177.80 

300 80 750725 584.90 750724 734.30 

300 100 750726 649.10 754363 809.80 

300 150 750727 779.10 750728 969.90 

300 200 754542 908.00 754368 1,123.30 

300 250 750729 939.40 754369 1,175.20 

300 300 750730 1,200.20 754373 1,460.70 

400 80 750731 2,516.40 

400 100 750732 2,516.40 

400 150 750733 2,769.90 

400 200 750734 2,795.80 

400 400 750735 3,152.00 


Gate Valves 


Valves 

3. Hydrants 













Epoxy 

– 118 – 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double-socket tees 50 50 750736 52.30 754374 68.70 

with socket branch 65 50 750737 65.20 754375 85.10 

(MMB-KS) 65 65 750738 69.90 754376 92.40 

80 50 750739 70.10 754378 94.70 

80 65 750740 83.10 754379 109.20 

80 80 750742 83.20 750741 101.10 

100 50 750743 88.30 754382 116.70 

100 65 750744 91.90 754383 122.40 

100 80 750746 95.10 750745 127.60 

100 100 750748 98.80 750747 131.70 

125 50 750749 126.60 754384 165.70 

125 65 750750 134.90 754385 174.50 

125 80 750751 134.60 754408 171.10 

125 100 750753 142.90 750752 182.50 

125 125 750754 146.80 754409 186.50 

150 50 750755 177.80 754410 223.40 

150 65 750756 177.00 754411 227.10 

150 80 750757 173.90 754412 219.20 

150 100 750759 161.00 750758 200.60 

150 125 750760 210.30 754413 265.40 

150 150 750762 195.60 750761 245.50 

200 80 750763 265.50 754414 331.90 

200 100 750765 254.50 750764 319.90 

200 125 750766 419.10 754415 526.10 

200 150 750767 320.10 754549 401.40 

200 200 750768 475.00 754418 592.60 

Item DN Abgangbohrung Item no. 

Epoxy 

€ 

Epoxy 

Item no. 

Enamel 

€ 

Enamel 

Double sockets with 50 2" 754544 81.50 754464 106.10 

internal threaded 65 2" 750775 93.90 754465 123.60 

branch (MMI-KS) 80 2" 750779 77.60 754466 100.80 

100 2" 750784 95.80 750783 124.70 

125 2" 750788 221.00 754467 287.40 

150 2" 750793 156.70 750792 203.90 

200 2" 750797 246.20 754550 320.80 

250 2" 750798 642.30 754468 834.80 

300 2" 750799 813.30 754470 1,056.00 

Düker fittings



Epoxy 

– 119 – 

€ 

Epoxy 

Item no. 

Enamel 


€ 

Enamel 

Double-socket tapers 65 50 750801 38,80 754471 50,20 

(MMR-KS) 80 50 750803 44,20 750802 60,20 

80 65 750804 47,80 754473 61,30 

100 50 750805 52,60 754475 67,30 

100 65 750806 51,20 754480 67,30 

100 80 750808 54,50 750807 73,70 

125 80 750809 81,90 754551 104,90 

125 100 750811 81,50 750810 104,60 

150 80 750813 92,90 750812 121,80 

150 100 750815 100,80 750814 131,30 

150 125 750817 102,60 750816 133,00 

200 100 750819 148,90 750818 190,60 

200 125 750821 182,80 750820 233,60 

200 150 750823 168,00 750822 214,60 

250 100 750824 311,00 754481 391,20 

250 150 750825 312,40 754482 391,20 

250 200 750827 355,60 750826 437,50 


Gate Valves 


Valves 

3. Hydrants 












General terms and conditions of delivery and payment 

§ 1 Scope 

Our general terms of sale apply exclusively; we do not recognize any conditions to the contrary 

or in deviation of our terms of sale, unless we have explicitly agreed to their validity 

in writing. All agreements made between us and the buyer regarding the execution of the 

underlying agreement are recorded in writing in this agreement. 

§ 2 Quotes and prices 

Our quotes are always subject to change and without obligation. Orders are only considered 

accepted following our written order confirmation. We reserve the right to change 

our prices appropriately if cost increases or reductions shall occur after the conclusion 

of this contract. We will present these to the buyer upon request. The buyer is entitled 

to withdraw if the price increases are verifiably in excess of the increase of the general 

cost of living. 

§ 3 Execution of shipments 

Images and sketches on which the order is placed are not binding for the execution. 

We reserve the right to make relevant changes and improvements. The dimensions and 

weights stated are only approximate values. This does not apply if it has been explicitly 

agreed upon in writing that parts were made following the special drawings and instructions 

of the buyer. Excess or short weight within the scope of customary tolerances do not 

qualify for price reductions or complaints. We are entitled to carry out partial deliveries. 

§ 4 Delivery time 

1. The start of the delivery time stated by us requires the clarification of all technical questions. 

The adherence to our delivery commitment further requires the timely and proper 

fulfillment of the buyer’s obligation. The delivery term does not start before the production 

of all information, documents, permits, approvals to be provided by the buyer as well as all 

other requirements to be supplied by the buyer. 

2. In the event of force majeure such as turmoil, measures within the context of labor 

disputes, in particular strike and lockout, we are entitled to postpone the delivery and 

shipment for the period of the interference plus an appropriate start-up time or, according 

to our choice to withdraw from the contract due to a part of it not yet being fulfilled. Any 

circumstances making the shipment significantly difficult for us are considered to be on the 

same level as force majeure, regardless of whether they incur in our own facilities or those 

of a sub-supplier. The buyer is entitled to ask us for a written explanation whether we wish 

to withdraw or deliver within an appropriate grace period. We are entitled to two-week’s 

notice upon receipt of the request for submitting a written explanation. Failure to submit 

such an explanation permits the buyer to withdraw from the contract to the extent where 

this has not been fulfilled yet. 

3. If the buyer falls in default of acceptance or is guilty of violating other duties to cooperate, 

we are entitled to demand indemnification for the loss we incur. In the event of default of 

acceptance, the risk of accidental destruction or accidental deterioration of the object of 

the sale passes to the buyer. 

§ 5 Payments 

1. Our invoices are due within 30 days upon invoice date and delivery without any deductions. 

Exceeding the stipulated payment deadline will result in interest being charged on arrears 

in the amount of ten percentage points above the respective base interest rate starting on 

the due date. We reserve the right to enforce higher interest, verifiably paid by us and any 

additional damages. 

2. If the buyer fails to fulfill his obligation to pay in due time or incompletely, all receivables 

existing at that time will become due immediately considering the incurrence of the 

interest stated above. In this case, we are entitled to withhold our services from entered 

agreements until the fulfillment of the entire due return service, or, following fixing an 

appropriate time limit, to refuse further contractual performance, to claim damages or 

withdraw from the contract. 

3. If we become aware of any facts pointing out a decreased creditworthiness of the ordering 

party, we are entitled to ask for securities regarding the present or any future receivables. 

As long as we do not gain evidence of the elimination of such circumstances, all unfulfilled 

contracts shall be executed in our discretion against pre-payment or cash on delivery. The 

buyer is only entitled to retention or offsetting if their counter claims are undisputed or 

legally established. 

§ 6 Packaging and shipment 

All shipments are made on the account and risk of the buyer, even in the case of carriagefree 

delivery. We have the right to choose the dispatch route, mode of transport and type 

of packaging. 

§ 7 Notice of defect and warranty 

1. The buyer must inspect the goods immediately upon receipt. Any notice of defect also with 

regard to shortages and mistaken deliveries are to be communicated to us in writing within 

one week upon detection. This also applies to defects which despite careful inspection 

cannot be detected at first. Any further processing is to be stopped immediately once 

a defect has been detected. We must be given the opportunity to determine the defect 

reported through a representative on-site. Any parts forming the subject of the complaint 

are to be returned to us upon request. If the goods are defective, we may decide in our own 

discretion to either eliminate the defect or to deliver a defect-free object. A requirement for 

our defect liability is the fact that the defect is not a negligible defect. If either one or both 

of the ways of subsequent performance are impossible or unreasonable, we are entitled 

to refuse said performance. 

– 120 – 

2. The same applies if the buyer does not fulfill their payment obligation to us in an extent 

which corresponds to the defect free part of the service rendered. If the subsequent 

performance is not possible or if it should fail, the buyer may decide to either reduce the 

purchase price accordingly or to withdraw from the contract according to the statutory 

regulations. This applies in particular in the event of culpable delay or refusal of subsequent 

performance even if it should fail the second time in a row. The above regulations shall also 

apply regarding the delivery of another object or a lower quantity 

3. We are liable according to the statutory regulations if the buyer claims damages which 

are based on intent and gross negligence. To the extent where we are not accused of 

intentional breach of contract, the liability for damages is limited to typical foreseeableoccurring 

damages. 

4. We are liable according to the legal requirements to the extent where we are culpable of 

violating a material contractual obligation. In this case, however, the liability for damages 

is limited to the typical foreseeable occurring damage. The liability for tortuous injury to 

life, limb or health shall remain unaffected thereof. The same applies to mandatory liability 

according to the product liability law. Unless otherwise agreed herein above, liability is 

excluded. The statute of limitation for claims for defects is 12 months starting with the 

passage of risk. 

§ 8 Retention of title 

1. We reserve the right of retention of title of the object of sale until all payments of the business 

relationship are received. In the event of contract violating behavior of the customer, 

in particular regarding delayed payment, we are entitled to take back the object of sale. 

Following the withdrawal of the object of sale, we are entitled to its utilization. 

2. The buyer is obligated to treat the object of sale with care. He is particularly obligated 

to sufficiently insure the object of sale at his own cost and in the replacement value. 

The customer must inform us immediately in the event of seizures or other third party 

interventions. 

3. The buyer is entitled to resell the object of sale within the context of an ordinary business 

transaction He already now, however, assigns all claims in the amount of the invoice total 

including VAT of our receivables which they are entitled to claim from his buyers or third 

parties as a result of the resale, and regardless of the fact if the object of sale was sold 

without or after further processing. The buyer continues to remain entitled to collect this 

claim even after its assignment. Our right of collection of the claim ourselves shall remain 

unaffected hereof. Should the customer be in payment default or submit an application to 

institute insolvency proceedings, we have the right to demand that the customer reveal the 

assigned claims and their debtors, make all statements necessary for the collection, hand 

out the pertaining documents and inform the debtors (third parties) of the assignment. 

4. If the object of sale is further processed, connected or inseparably mixed with another 

object not belonging to us, we acquire co-ownership of the new object in relation of the 

value of the object of sale to the other, processed objects at the time of processing. The 

object created as a consequence of further processing in any case is subject to the same 

conditions as objects of sale delivered with reservation. 

§ 9 General regulations 

1. Drawings, samples, models, cost estimates and the likes continue to fall under our property 

and copyright. Such documents must not be made available to any third parties without 

our explicit consent. All contractual partners of the buyer must be bound by contract 

accordingly. 

2. Any orders involving the customer instructing us of certain features and properties especially 

with regard to engineering, are backed up by the customer ensuring that such instructions 

do not interfere with third party industrial property rights. In the event of use, the buyer 

keeps us indemnified against all claims in this respect. 

3. All contracts between us and the buyer shall be exclusively subject to the laws of the 

Federal Republic of Germany and to the exclusion of the Vienna Convention on Contracts 

for the International Sale of Goods (CISG). 

4. Place of performance for all liabilities arising from this contract, in particular delivery and 

payment is our respective supplying plant. Exclusive legal venue, also for all actions related 

to checks and bills of exchange is Aschaffenburg, Germany. 

Düker GmbH & Co. KGaA 

Düker fittungs and valves

FiTTiNgS aNd valveS 

dRaiNage TeCHNOlOgY 

eNgiNeeRiNg 

glaSS liNiNg TeCHNOlOgieS 

JOBBiNg FOUNdRY 

04.12 Subject to technical modifications and typing errors. 

düker gmbH & Co. Kgaa 

Hauptstraße 39 – 41 

d-63846 laufach 

tel. +49 6093 87-0 

Fax +49 6093 87-246 

internet: www.dueker.de 

e-mail: info@dueker.de

2012 Price List

Create successful ePaper yourself

Delete template?

Save as template?