AUREL 900 SCREEN-STENCIL PRINTER

APPLICATIONS
AUREL Mod. 900 is a high precision free stand
screen/stencil printing machine and meets the
requirements for high quality automatic printing on large
areas.
The Mod. 900 can print substrates up to 350x400 mm,
assuring uniform deposition from corner to corner.
Some applications in the electronic and in the general
purpose industries are:
- Thick film pastes.
- Solder paste for SMT.
- Glue, adhesive, resin.
- Polimeryc pastes
- Solder resist.
- Flexible Foils.
- Membrane switch panel.
- Solar cell
FEATURES
- Double squeegee head
- Speed & Pressure digital controll
- Automatic shuttle table.
- Large printing area
- Print & Flood, Print & Print, Print + Print.
Contanct and off contact.
- Printing head dc motor drive.
- Continuously adjustment of the printing
speed and stroke.
- Precision X-Y Theta work table for accurate
substrate alignment.
- Substrate hold-down by vacuum.
Vacuum pump included.
- All movements on precision ball bearing
linear slides.
- High precision print head with micrometric height
and down stop adjustment.
OPTIONS
- Vision TV Camera Proguide System
- Screen adapters.
- Fixtures and chucks.
- Screen service.
SPECIFICATION
Max Print Area
Max Substrate Size
Max Squeegee Width
Screen Size
Carriage Repeatable
Squeegee and Screen
Parallel
X-Y Adjustment
Z Adjustment (Screen Height)
Theta Adjustment (Rotation)
Print Stroke
Squeegee Speed
Squeegee Pressure
Dimensions
Approx. Weight
Compressed Air
Power
350 x 400 mm
450 x 450 mm
400 mm
540 x 540 mm
± 0,02 mm
± 0,02 /100 mm
25 mm
10 mm
± 5º
50 - 400 mm
0 - 250 mm/sec
0 - 30 Kg
1100x1300x1500Hmm
200 Kg
5 Ate 50 L/min.
220 V 50Hz 2 A
Aurel Automation SpA • Via Foro dei Tigli, 4 • 47015 MODIGLIANA (FC) • ITALY • Tel. +39 0546 941124 • Fax +39 0546 941660
www.aurelautomation.com • automation@aurelautomation.com
Specification are subject to change without prior notice.
AUREL 900 SCREEN-STENCIL PRINTER