UNDERCOAT KSS 426 KW
UNDERCOAT KSS 426 KW
UNDERCOAT KSS 426 KW
- TAGS
- undercoat
- hempel.com.bh
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>UNDERCOAT</strong> <strong>KSS</strong> <strong>426</strong> <strong>KW</strong><br />
Description: HEMPEL'S <strong>UNDERCOAT</strong> <strong>KSS</strong> <strong>426</strong> <strong>KW</strong> is a fairly quick drying intermediate<br />
coat based on alkyd resin. It has excellent hiding power.<br />
Finish: Eggshell smooth<br />
Colour: White - 10000<br />
Area of use: Interior and Exterior<br />
Substrates: Wood, Metals, Concrete, Gypsum etc.<br />
Volume solids: 51%<br />
Specific gravity: 1.4 kg/litre<br />
Flash point: 38°C<br />
Application:<br />
Method Brush/roller Spray<br />
Thinning, max. 10% 20%<br />
Thinning and<br />
cleaning THINNER 08230 THINNER 08230<br />
Dry film 40 microns<br />
Coverage, theory. 12.7 m²/litre<br />
Drying:<br />
Temperature 10°C 20°C 40°C<br />
Dry to touch 3 hours 2 hours 1 hour<br />
Dry to handle 5 hours 3 hours 2 hours<br />
Min. recoat 3 days 1 day 8 hours<br />
Max. recoat 1 week None None<br />
Surface condition: The surface shall be stable firm, dry and free of dust, loose or old paint, dirt,<br />
grease and oil.<br />
Sealing : Wood : HEMPEL'S WOOD PRIMER <strong>KSS</strong> 121 <strong>KW</strong><br />
Metals : HEMPEL'S RED OXIDE PRIMER 123 <strong>KW</strong><br />
Concrete : HEMPEL'S ALKALI RESISTING PRIMER <strong>KSS</strong> 130 <strong>KW</strong><br />
Filling : Wood : HEMPEL'S MULTIPURPOSE ACRYLIC FILLER 38830<br />
Metals : HEMPEL'S EPOXY FILLER 35260<br />
Concrete : HEMPEL'S ACRYLIC FILLER 389 <strong>KW</strong><br />
General remarks: The coverage is largely dependent on porosity of the substrate the extent of<br />
thinning and the method of application. Drying data is given on the assumption<br />
that proper ventilation and relative humidity below 65% is provided.<br />
Kuwait Standard HEMPEL'S <strong>UNDERCOAT</strong> <strong>KSS</strong> <strong>426</strong> <strong>KW</strong> complies with standards<br />
Specification: of <strong>KSS</strong> 15-1994. The paint is tested by the Government's Research Station<br />
and Institutes and is recommended for use in Kuwait.<br />
Safety: As a general rule, inhalation of paint mist and contact of liquid paint with skin<br />
and eyes should be avoided. Forced ventilation should be provided when<br />
working in confined spaces or stagnant air.<br />
Even when ventilation is provided, respiratory, skin and eye protection are<br />
always recommended when spraying paint.<br />
Issued: June 2004 Page 1 of 2
This Product Data Sheet supersedes those previously issued.<br />
For definition and scope, see explanatory notes to applicable Product Data Sheets.<br />
Data, specifications, directions and recommendations given in this data sheet represent only test results or<br />
experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or<br />
appropriateness under the actual conditions of any intended use of the Products herein must be determined<br />
exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to<br />
HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in<br />
writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including<br />
but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or<br />
consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or<br />
otherwise.<br />
Product data are subject to change without notice and become void five years from the date of issue.<br />
Issued: June 2004 Page 2 of 2