Views
5 years ago

Installation Guide V8.3.3 - geovision-bg.com

Installation Guide V8.3.3 - geovision-bg.com

Connecting One GV-Combo

Connecting One GV-Combo A Card (DVI-Type) 14 • Connect the DVI video and audio cables to the GV-Combo A Card. • Connect the PC’s internal power supply to the GV-Combo A Card. • Connect the DVI TV Out cable to the TV monitor if needed. 2 3 1-16 DVI Video Cable 1-16 DVI Audio Cable 2 DVI TV Out Cable TV Monitor Figure 1-7 1 GV-Combo A Card Internal Power Y Cable Note: The Card only works when it connects to PC’s power supply with the supplied Internal Power Y Cable.

Connecting Two GV-Combo A Cards 1 Video Capture Cards You can install two GV-Combo A Cards of the same model for up to 32 channels. Master Card is the card with 1-16 channels and Slave Card is that with 17-32 channels. Normally, the card attached to the lower PCI slot number will act as Master, and the card attached to the higher PCI slot number will act as Slave. • TV Output Connection: The RCA connector in the Master Card is for displaying 1-16 channels, and the one in the Slave Card is for displaying 17-32 channels. • Hardware Watchdog Connection: Connect the supplied Hardware Watchdog Jump Wire to the Master Card. • Accessory Card Connections: � GV-NET/IO Card: Connect the card only to the Master Card. � GV-Loop Through Card: Connect the card for each video capture card. � GV-Multi Quad Card: Only connect one card to any of two video capture cards. 15

GeoVision V8.5 Installation Guide - XTECHCAM
Geovision NVR Software Installation Guide - Use-IP
Installation Guide V8.5.6.0 - ApexCCTV
Installation Guide V8.5.5.0 - Ezcctv
Installation Guide V8.5.6.0 - CCTV Cameras
Installation Guide V8.4 - Remote-security.com
Installation Guide V8.2 - Video
Installation Guide V8.3 - Security Camera Systems
AJA FS1 Installation and Operation Guide
GV-LPR Feature Guide - GeoVision
GeoVision GV-Data Capture Troubleshooting - Ezcctv
Installation Guide
DVR Server Installation Guide. [.pdf, 13MB]
Geovision CMS Manual(8.5) - XTECHCAM
Chapter 9 The I/O Terminal Block - GeoVision
Download Installation Guide - Jands
Installation and Operation Guide - Aja
Installation and Operation Guide - AJA
Installation and User Guide - Autodesk
Geovision NVR Software Feature Guide - Use-IP
Installation Guide - Smarthome
GeoVision V8.5 Feature Guide (PDF) - XTECHCAM
Quick Installation Guide - TRENDnet
Installation Guide
A Guide to Quality Installed Sound Systems. - Jands