Operating Instructions Air Conditioner
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
How to Operate<br />
remote control preparation<br />
Inserting the batteries<br />
Pull out<br />
Close<br />
Insert AAA or<br />
R03 batteries<br />
Remote Control Transmitter<br />
• Make sure it is not<br />
obstructed.<br />
• Certain fluorescent lights<br />
may interfere with signal<br />
transmission. Please<br />
consult your nearest<br />
dealer.<br />
POWER TIMER<br />
RECEIVER<br />
• The retention period of batteries might be affected<br />
to be shorter because of the using times of the<br />
remote control, even less than one year.<br />
INDICATOR<br />
Maximum distances : 8m<br />
mODE operation<br />
AUTO<br />
COOL<br />
DRY<br />
FAN<br />
FAN<br />
SPEED<br />
Select Turn on Adjust<br />
COOL<br />
temperature<br />
AUTO<br />
FAN<br />
DRY<br />
auto mode - For your convenience<br />
• Unit selects the operation mode according to the room<br />
temperature.<br />
• Once auto mode is selected, the unit will operate at the<br />
standard setting temperature.<br />
• To change the standard setting temperature, press<br />
“ ” or for “ ”.<br />
Room<br />
temperature<br />
Operation<br />
mode<br />
Standard<br />
setting<br />
temperature<br />
for<br />
(+2°C) (–2°C)<br />
23°C & above Cool 25°C 27°C 23°C<br />
Below 23°C Dry 22°C 24°C 20°C<br />
LCD display<br />
AIR<br />
SWING<br />
cool mode - To enjoy cool air<br />
• Recommended temperature: 26°C ~ 28°C<br />
dry mode - To dehumidify the<br />
enviroNment<br />
• During soft dry operation, the indoor fan operates at low<br />
fan speed to give a very gentle cooling operation.<br />
• Recommended temperature: 1°C ~ 2°C lower than room<br />
temperature.<br />
FAN MODE - TO MAINTAIN A GOOD<br />
VENTILATION OF THE ROOM<br />
• The compressor will not operate during air circulation<br />
operation.<br />
Notes:<br />
• Use a screwdriver to short the two Reset Terminals on the<br />
back of remote control to restore the remote control's default<br />
setting.<br />
• Remove the batteries if the unit is not to be used for a long<br />
period.<br />
● For cool and dry modes, the range of temperature<br />
can be selected from 16°C ~ 30°C.