Operating Instructions Air Conditioner

Care & Cleaning
Switch off the power supply before cleaning
AIR FILTER
Vacuum, wash and dry.
• It is recommended to clean air filters once every 2 weeks.
• Wash/rinse the filters gently with water to avoid damage to the
filter surface.
• Dry the filters thoroughly under the shade, away from fire or
direct sunlight.
• Replace any damaged filter.
Part no.: CWD001110
POwER
TIMER
AirQuality
INDOOR UNIT
Wipe the unit
gently with a
soft, dry cloth.
FRONT PANEL
Raise and pull to
remove. Wash
and dry.
Remove
AIRFLOW DIRECTION
LOUVER
AUTO OFF/ON BUTTON
To operate the air conditioner when the remote control
is misplaced or malfunction.
Press once
Action
Press and hold until you hear one
beep, then release
Mode
Automatic
Force Cooling
• To turn off, press the AUTO OFF/ ON button again.
To switch off the remote control signal receiving sound,
press the button and hold for approximate 10 seconds
until double beep sound is heard, then release.
• Repeat the above step if you want to switch on the
signal receiving sound.
To switch off the auto restart control, press the button
and hold for approximate 15 seconds until triple beep
sound is heard, then release.
• To switch on the auto restart control, repeat the above step.
Washing Instructions
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
Hints
■ Clean the filter regularly for best performance and to reduce
power consumption.
■ Please consult your nearest dealer for seasonal inspection.