Manual de Funcionamiento
Manual de Funcionamiento
Manual de Funcionamiento
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8 Componentes Mecánicos10.4 8.1 Incluido material <strong>de</strong> montajeComponentesincluidosjunta <strong>de</strong> mangueraCierre <strong>de</strong>juntaMotor PTC Abraza<strong>de</strong>ras<strong>de</strong> inst.Pieza <strong>de</strong>centradoTerminalespara max.[mm²]M M M M M M12 16 20 25 12 16Diámetro <strong>de</strong>cable [mm]3,5-7 4,5-10 7-13 9-172.015- 2.022 2 (3) 2 2 3 1 1 4 1 104.022- 4.040 2 (3) 2 2 3 1 1 4 1 104.055- 4.110 2 (3) 2 2 3 1 1 4 1 10( )max. entrada <strong>de</strong> cable disponible10.4 8.2 Componentes Opcionales8.2.1 AccesoriosAnillo <strong>de</strong> montajeDisponible para los diámetros: 140 mm155 mmAnillos <strong>de</strong> montaje¡ATENCION!Si el HYDROVAR se instala en un motor con un ventilador <strong>de</strong> cubierta <strong>de</strong>plástico, se <strong>de</strong>be utilizar un anillo en acero inoxidable.8.2.2 Sensores• Transductor <strong>de</strong> presión • Sensor <strong>de</strong> temperatura• Transductor <strong>de</strong> presión diferencial • Display <strong>de</strong> caudal• Sensor <strong>de</strong> nivel placa <strong>de</strong> orificio, caudalímetro inductivo8.2.3 Filtro• Línea <strong>de</strong> bobinado8.2.4 Cables <strong>de</strong> motor para instalación directaDisponible para HV 2.015 – 4.11021