Views
5 years ago

3& 0) )#[ 'ULYHU 86% (&3 - Fax-Anleitung.de

3& 0) )#[ 'ULYHU 86% (&3 - Fax-Anleitung.de

+ Using a USB hub: We

+ Using a USB hub: We recommend that you use a USB hub with its own power supply. Some USB hubs powered by the PC can cause malfunctions. If problems arise, connect your fax directly to one of the USB ports on your PC. + Problems related to the PC: Some hardware configurations (such as VIA Chipsets with the AMD processor) may cause problems. check the Web site of the manufact urer of the chipset, your PC motherboard, and your PC for any possible software updates. + Changing connection type: If your fax was connected to your PC via an ECP cable and you want to connect it using a USB cable, perform this procedure: Turn off your fax machine. Disconnect the ECP cable. Uninstall your PC software (Start menu > Programs > PC MF-F@X Driver > SetupApp.exe). Restart your PC when reques ted by the uninstall program. After the PC restarts, connect the USB cable. Turn on your fax machine. Insert the CD-ROM. Reinstall the PC software. ,QFRUUHFW (&3 LQVWDOODWLRQ + If your PC does not have a parallel port that can be used in ECP mode: your configuration does not allow you to use PC MF-F@X Driver with a parallel port configuration. Use a USB port of your PC. To obtain the corresponding cable, contact your dealer. + The BIOS on your PC was not configured correctly and the LPT port is not declared as an ECP port: Restart your PC; Start the BIOS configuration program ( Setup); Configure the parallel port in ECP mode. + After the installation, the Monitor does not recognise the fax or only recognises it for a few seconds: Check the connection between the two devices; Check that another printer in stalled on the same port as PC MF-F@X Driver is not in conflict with PC MF-F@X Driver. This may occur, for example, with bidirectional printers, even if the other printer is not defined as the default printer. Try the following steps, in this order: - Temporarily configure the other printer as "output to file" (FILE), - Check the documentation of the other printer to disable the bidirectional dialogue, - Remove the other printer. Under Windows 95/98, check that the paralle l port is configured correctly (click the START button > SETTINGS > CONTROL PANEL > SYSTEM > DRIVER tab > LPT PRINTER PORT > RESOURCES tab): - The port should be of type ECP, - The port addresses are for a port ECP LPT1 0378-037F and 0778-077B, it may have a DMA channel. - 29 -

Under Windows NT4.0, check th e characteristics of the ECP parallel port in your BIOS setup program (see above). + Whatever your operating system, start the SETUPCOM.EXE program located in the installation folder of the PC MF-F@X Driver software. Check that the settings of the ECP port used match those of your operating system. Note: The SETUPCOM program can also help you solve conflict problems with other peripherals installed on your PC. Use the settings of this program with care. + Changing connection type: If your fax was connected to your PC via a USB cable and you want to connect it using an ECP cable, perform this procedure: Turn off your fax machine. Disconnect the USB cable. Uninstall your PC software (Start menu > Programs > PC MF-F@X Driver > SetupApp.exe). Restart your PC when requ ested by the uninstall program. After the PC restarts, connect the ECP cable. Turn on your fax machine. Insert the CD-ROM. Reinstall the PC software. 35,17,1* '2(6 127 :25 + In the print settings of your application, check that the default printer is set to the printer where you want to print. + Check that the fax is available for printing. The Monitor program must show that the fax is ready to print. 6+$5,1* 7+( 35,17(5 ,1 $ 1(7:25 + You can share the printer installed by PC MF-F@X Driver in a network so that other PCs in the network can use it: printer drivers are provided in the OEMSETUP folder on the PC MF-F@X Driver CD-ROM. You may need to use them to install a shared printer on the other PCs in the network. - 30 - (63$f2/ '(876&+ (1*/,6+ )5$1d$,6 '87&+ ,7$/,$12

AT est une marque déposée de Hayes ... - Fax-Anleitung.de
FRANÇAIS MW 932 MW 939 MW 942 MW 949 ... - Fax-Anleitung.de
FRANÇAIS 930 932 936 939 940 942 946 949 - Fax-Anleitung.de
6$)0,* 756 3/86 6$)0,* 756 3/86
'8$/ 02'( 3KRQH *60 '(&7 %DVH '(&7 7(/(&20 - Fax-Anleitung.de
(0)3 89 73 10 01 Fax: +33 (0)3 - Fédération des Parcs Naturels ...
ISP A - Av.Louis-Ruchonnet 14,Lausanne,tél 0 21 3 21 29 11 ,fax 0 ...
Mise en route 1 3 2 4 5 6 Scanner numérique à plat HP Scanjet 5530
Kenwood DVF-N7080 - Home Electronics "English, French, German, Dutch, Italian, Spanish (Supplement and Correction)" (2005/3/23)
Kenwood DVF-N7080 - Home Electronics English, French, German, Dutch, Italian, Spanish (Supplement and Correction) (2005/3/23)