micron str receiver micron str receiver - Fox

UK
VOLUME CONTROL
Turn clockwise to increase
volume, anti-clockwise to
lower volume.
RADIO RECEIVER CODE SETTING
Your receiver has been factory pre-set. To receive
transmissions from your bite alarms the code selector must
be set to match that of your Microns. If you experience
interference from another angler within the receiver range,
you can simply alter one slide on the code selectors in both
Micron STRs and receiver to select another code. Any
number of STRs of any colour may be used with the
receiver.
ON/OFF SWITCH
A two position switch to
activate/deactivate the
receiver. When you first turn
the receiver on LED will
illuminate to set the unit.
This will go out after approx
20 seconds.
SIGNAL RECEPTION
Your receiver is capable of
receiving a signal from your
bite alarms with a range
exceeding 60 metres.
However this signal may be
affected by atmospheric
conditions and surroundings.
N.B. - Laying your receiver
on the ground or placing it
in your pocket will affect its
reception due to the antenna
being detuned.
LEATHER CASE
Available as an optional,
the Leather Receiver Case
(E18066) features a belt
clip and clear PVC window
to display LED.
UK
MICRON STR RECEIVER
‘SIMULATED RUN’
FEATURE
The audible pulse rate of the
Micron STR receiver will
increase on longer
transmissions to indicate a
run.
4 5
MICRON STR RECEIVER