9241 Bedienungsanleitung 2 Operating Instructions 10 Mode d ...

soehnle.ultrabold2.com

9241 Bedienungsanleitung 2 Operating Instructions 10 Mode d ...

ENGLISH

Totalising

XX

After the weighing product has been placed on the scale,

press the key.

ACC 1 appears on the display for 2 seconds.

Remove the weighing product and wait until the display

settles.

Place the next weighing product on the scale. Press the

key again.

ACC 2 appears on the display for 2 seconds, etc.

Up to 99 individual weights can be totalised.

Total memory display

After the weighing product has been placed on the scale,

press the key.

The number of individual weighings is first displayed, followed

by the total weight.

Clearing the total memory

To clear the total weight, press the

weight is displayed.

key when the total

User Mode

The scale has 6 parameters which can be changed by the

user.

• Change the scale division in bad ambient conditions

• Set the backlight for optimum energy efficiency

• Set the I/O port (not possible)

• Print with totalising (not possible)

• Zero tracking

• Change the standard units

• Set the beep tone when checking the filter setting

Activate by pressing the and keys simultaneously

Changing the scale division

Example: 6 kg scale has 0.2 g division resolution

Setting options 0.2 / 0.5 / 1 / 2 g

Displayed as: Inc 2 / 5 / 10 / 20

Increment by pressing and confirm by pressing .

Backlight

No lighting

Continuous on

On when under load

Increment by pressing and confirm by pressing .

15

More magazines by this user
Similar magazines