the Dual Boiler ™ - Seattle Coffee Gear

OPERATING YOUR BREVILLE DUAL BOILER
OPERATING
your Breville Dual Boiler
BEFORE FIRST USE
Machine Preparation
Remove and discard all labels and
packaging materials attached to your
espresso machine. Ensure you have
removed all parts and accessories before
discarding the packaging.
Remove the water tank located at the back of
the machine by pulling down the water tank
handle. Remove the plastic bag containing
the water filter and water filter holder. Clean
parts and accessories (water tank, portafilter,
filter baskets, jug) using warm water and a
gentle dish washing liquid, then rinse well.
CONDITIONING THE WATER FILTER
• Soak the water filter in a cup of water
for 5 minutes, then rinse under cold
running water.
• Wash the water filter holder with cold
water, taking specific care to rinse the
stainless steel mesh.
• Insert the water filter into the two parts
of the water filter holder.
• Set Date Dial 2 months ahead
• To install the assembled water filter
holder into the water tank, align the base
of the water filter holder with the adapter
inside the water tank. Push down to lock
into place.
• Slide the water tank back into position at
the back of the machine by pushing then
lifting up the water tank handle.
CAUTION
Do not descale this machine. Use the
provided water filter especially if
you have hard water. Change every
2 months. Contact Breville Customer
Service on 1-866-273-8455 or visit
www.breville.com for replacement
filters or for advice.
1 2 3 4 5 6
REPLACEMENT DUE
Remove tank & filter holder
Soak new filter for
5 minutes
Rinse new filter & mesh Place filter into filter holder Set date 2 months ahead Install filter & replace tank
11