USB 3.0 EXTERNAL 2.5'' HDD/SSD ENCLOSURE - SilverStone

More documents

Recommendations

Info

RVS02USB 3.0 EXTERNAL 2.5’’ HDD/SSD ENCLOSURE4. Slide HDD as shown to make sureconnection is completed.5. Target the hook of the bottom coverto corresponding catch on the body.6. Slide bottom to make sure connectionis completed. It makes a "CLICK" sound.5
RVS02USB 3.0 EXTERNAL 2.5’’ HDD/SSD ENCLOSUREENSafely Remove HDD External CaseWhatever kinds of OS you are using, please follow the steps below to remove this external enclosure safely.a. Double click rapidly on green arrow icon at right bottom corner of screen.b. Windows or Mac will pop a window to ask if you would like to disconnect this device.c. You can easily stop this portable enclosure by following on screen steps in few seconds.If you use an all new HDDUse “Disk Manage” to configure your HDD.TroubleshootingA. Please make sure your HDD has been installed correctly.B. Please make sure you have installed correct driver for this enclosure.C. Please make sure your HDD has been formatted. If no, please format you hard drive first.* if you don't know how to install or debug, please don't disassemble it. Please contact the seller for help. *CAUTION!!A. If you are not sure what OS you are using, please contact your PC dealer.B. Please don't put this external enclosure in a humid or high temperature environment.C. If the PC or this storage is damaged by fault operation of user, we would not take the responsibility of compensation or repair.6
Page 1 and 2: USB 3.0 EXTERNAL 2.5’’ HDD/SSD
Page 3 and 4: RVS02USB 3.0 EXTERNAL 2.5’’ HDD
Page 5: RVS02USB 3.0 EXTERNAL 2.5’’ HDD

USB 3.0 EXTERNAL 2.5'' HDD/SSD ENCLOSURE - SilverStone

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?