Views
2 weeks ago

Sony HDR-CX900E - HDR-CX900E Manuel d'aide (version imprimable) Anglais

Sony HDR-CX900E - HDR-CX900E Manuel d'aide (version imprimable) Anglais

[149] How to Use Menu

[149] How to Use Menu operations Setup WPS Push If your access point has a WPS button, you can register the access point to this product easily. 1. - [Setup] - [ Connection] - [WPS Push]. 2. Press the WPS button on the access point you want to register. Note [WPS Push] requires that the security of the access point be WPA or WPA2 and that the WPS push button method is supported. If the security of your access point is set to WEP or your access point does not support the WPS push button method, register the access point manually. For details on the supported functions and settings for your access point, refer to the manual of your access point or contact the administrator of your access point. Depending on the surrounding conditions such as obstacles between this product and access point, signal condition and the materials of the wall, etc., connections may not be established or the communication distance may be shorter. Move this product or decrease the distance between this product and the access point. [150] How to Use Menu operations Setup Access point settings You can register your access point manually. Before starting the procedure, check the SSID name, security mode, and password of the access point. The password may be preset in some devices. For details, see the access point operating instructions or contact the administrator. 1. - [Setup] - [ Connection] - [Access point settings]. 2. Select the access point you want to register. The desired access point is displayed: Select the access point.

The desired access point is not displayed: Select [Manual setting], then enter the SSID name of the access point, and then select the security mode. 3. Enter the password, and then select [Next] - [Register]. Access points without the icon do not require a password to be entered. Other setting items Depending on the status or the setting method of your access point, there may be more setting items. WPS PIN: Displays the PIN to enter to the connected device. IP address setting: Select [Auto] or [Manual]. IP address: If you are entering the IP address manually, enter the fixed address. Subnet mask/Default gateway: When you set [IP address setting] to [Manual], enter the IP address and subnet mask to match your network environment. Priority Connection: Select [On] or [Off]. Note Hint To give the registered access point priority, set [Priority Connection] to [On]. For input method, see “How to use the keyboard.” [151] How to Use Menu operations Setup Edit Device Name