Views
6 months ago

Sony HDR-CX900E - HDR-CX900E Manuel d'aide (version imprimable) Anglais

Sony HDR-CX900E - HDR-CX900E Manuel d'aide (version imprimable) Anglais

To remove the battery

To remove the battery pack Turn off this product. Slide the battery release lever ( ) and remove the battery pack ( ). Note You cannot use any InfoLITHIUM battery pack other than the V series to this product. You cannot use the NP-FV30 InfoLITHIUM battery pack with this product. In the default setting, the power turns off automatically if you leave this product without any operation for about 2 minutes, to save battery power (Power Save). [11] How to Use Getting started Power source preparations Charging the battery pack using the AC Adaptor Charge the battery pack using the supplied AC Adaptor. Attach the battery pack in advance. 1. Close the LCD monitor. When the viewfinder is pulled out, retract it. 2. Connect the AC Adaptor and the power cord (mains lead) to this product and a wall outlet (wall socket). The POWER/CHG (charge) lamp lights orange. The POWER/CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect the AC Adaptor from the DC IN jack of this product.

A: AC Adaptor B: Power cord (mains lead) C: DC IN jack D: Align the mark on the DC plug Note Be aware of the following notes on using the AC Adaptor. Use a nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using this product. Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. Hint It is recommended that you charge the battery in a temperature range of 10 °C to 30 °C (50 °F to 86 °F). [12] How to Use Getting started Power source preparations Charging the battery pack using your computer Charge the battery pack by connecting this product and your computer with the Built-in USB Cable. Attach the battery pack in advance. 1. Close the LCD monitor. When the viewfinder is pulled out, retract it.