Views
8 months ago

Sony HDR-CX900E - HDR-CX900E Manuel d'aide (version imprimable) Anglais

Sony HDR-CX900E - HDR-CX900E Manuel d'aide (version imprimable) Anglais

2. Pull out the Built-in

2. Pull out the Built-in USB Cable from this product. 3. Connect this product to a running computer using the Built-in USB Cable. The POWER/CHG (charge) lamp turns orange. The POWER/CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect the Built-in USB Cable from the computer, and then store it in the pocket on the grip belt. If the Built-in USB Cable is not long enough for the connection, use the USB connection support cable. : Built-in USB Cable : To a wall outlet (wall socket) To put the Built-in USB Cable away Put the Built-in USB Cable back in the pocket on the grip belt after use. Hint It is recommended that you charge the battery in a temperature range of 10 °C to 30 °C (50

°F to 86 °F). [13] How to Use Getting started Power source preparations Turning the power on Turn on this product. 1. Open the LCD monitor of this product and turn the power on. You can also turn on this product by pressing POWER or by pulling out the viewfinder. To turn off the power Close the LCD monitor. If the viewfinder is pulled out, retract the viewfinder as shown in the illustration below. You can also turn off this product by pressing POWER. On turning this product on or off using the LCD monitor or the viewfinder The power of this product is turned on or off depending on the status of the LCD monitor or the viewfinder. LCD monitor: Open, Viewfinder: Retracted Power On LCD monitor: Open, Viewfinder: Pulled out Power On LCD monitor: Closed, Viewfinder: Retracted Power Off LCD monitor: Closed, Viewfinder: Pulled out