Views
4 months ago

Sony HDR-CX900E - HDR-CX900E Manuel d'aide (version imprimable) Anglais

Sony HDR-CX900E - HDR-CX900E Manuel d'aide (version imprimable) Anglais

[17] How to Use Getting

[17] How to Use Getting started Initial setup Adjusting the angle of the viewfinder for easier viewing You can adjust the angle of the viewfinder for easier viewing. 1. Close the LCD monitor. 2. Pull out the viewfinder ( ) and adjust the angle for easier viewing ( ). 3. Move your eye close to the viewfinder. As your eye moves closer to the viewfinder, the eye sensor detects your eye, and then indicators appear on the viewfinder. If the indicators on the viewfinder appear blurred, adjust the appearance using the viewfinder lens adjustment dial located on the side of the viewfinder. [18] How to Use Getting started Initial setup Displaying items on the LCD monitor Items on the LCD monitor disappear if you do not operate this product for a few seconds after you turn this product on or switch between the movie recording and photo shooting modes. To display items on the LCD monitor again, touch anywhere on the LCD monitor other than buttons. Hint To keep the LCD monitor active, use [Display Setting] to change the setting. [19] How to Use Getting started Preparing a memory card

Inserting a memory card Insert a memory card into this product. 1. Open the cover and insert the memory card until it clicks. A: Access lamp B: Insert the card with the notched edge in the direction as illustrated. Note To ensure stable operation of the memory card, it is recommended to format the memory card with this product before the first use. Formatting the memory card will erase all the data stored on it and the data will be irrecoverable. Save your important data on your PC, etc. If [Failed to create a new Image Database File. It may be possible that there is not enough free space.] is displayed, format the memory card. Confirm the direction of the memory card. If you forcibly insert the memory card in the wrong direction, the memory card, memory card slot, or image data may be damaged. Do not insert any memory card other than those that fit into the memory card slot. Doing so may cause a malfunction. When inserting or ejecting the memory card, be careful so that the memory card does not pop out and drop. Memory card will not be recognized by this product unless it is inserted straight in the correct direction. If [Preparing image database file. Please wait.] is displayed, wait until the message disappears. Hint To eject the memory card, open the cover and lightly push the memory card in once. [20] How to Use Getting started Preparing a memory card Types of memory card you can use with this product