Views
8 months ago

Sony HDR-CX900E - HDR-CX900E Mode d'emploi Anglais

Sony HDR-CX900E - HDR-CX900E Mode d'emploi Anglais

Getting started Supplied

Getting started Supplied items The numbers in ( ) indicate the supplied quantity. All models •Camcorder(1) •AC Adaptor (1) •Lens hood See page 50 on how to attach the lens hood to the camcorder. • Wireless Remote Commander (1) • Power cord (mains lead) (1) • Lens cap (attached to the camcorder) (1) • USB connection support cable (1) The USB connection support cable is designed for use with this camcorder only. Use this cable when the Built-in USB Cable of the camcorder is too short for connection. • “Operating Guide” (This manual) (1) FDR-AX100/AX100E only • Rechargeable battery pack NP- FV70 (1) HDR-CX900/CX900E only • Rechargeable battery pack NP- FV50 (1) •HDMI cable (1) GB 14

Charging the battery pack 1 Turn off your camcorder by closing the LCD monitor, retract the viewfinder, and attach the battery pack. Battery pack Getting started 2 Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket). AC Adaptor DC IN jack DC plug Align the mark on the DC plug with that on the DC IN jack. Power cord (mains lead) Wall outlet (wall socket) • The POWER/CHG (charge) lamp turns orange. • The POWER/CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect the AC Adaptor from the DC IN jack of the camcorder. Charging the battery using your computer Turn off your camcorder and connect the camcorder to a running computer using the Built-in USB Cable. GB 15