Views
8 months ago

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Connecting to an HDMI

Connecting to an HDMI jack If your AV amplifier (receiver) has an HDMI input, use this connection. You can enjoy higher quality sound from the connected AV amplifier (receiver). To enjoy 7.1 channel sound, use a High Speed HDMI cable. If you connect a Sony AV amplifier (receiver) that is compatible with the “Control for HDMI” function (page 18), refer to the instruction manual supplied with the AV amplifier (receiver). Blu-ray Disc/DVD player HDMI cable (not supplied) AV amplifier (receiver) HDMI cable (not supplied) TV 1 Connect the HDMI OUT jack of the player and your AV amplifier (receiver). 2 Set “BD Audio Setting” to “Direct” in the “Audio Settings” setup (page 51). To enjoy the secondary audio (commentary), set “BD Audio Setting” to “Mix.” 22

z Check the following settings: – “Audio Output Priority” is set to “HDMI” in the “Audio Settings” setup (page 50). – “Audio (HDMI)” is set to “Auto” in the “Audio Settings” setup (page 50). b Not all HDMI-compatible AV amplifiers (receivers) accept 8ch Linear PCM signals. Refer as well to instruction manual supplied with the connected AV amplifier (receiver). Connecting to digital jacks (OPTICAL/COAXIAL) If your AV amplifier (receiver) has a Dolby *1 Digital, Dolby Pro Logic, or DTS *2 decoder and a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS (5.1ch) surround effects. Blu-ray Disc/DVD player Hookups and Settings or Coaxial digital cable (not supplied) Optical digital cable (not supplied) AV amplifier (receiver) : Signal flow 1 Connect the digital jack of the player and your AV amplifier (receiver). 2 Set “Audio Output Priority” to “Coaxial/Optical” in the “Audio Settings” setup (page 50). ,continued 23