Views
5 months ago

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Step 5: Connecting the

Step 5: Connecting the Mains Lead After all of the other connections are complete, connect the supplied mains lead to the AC IN terminal of the player. Then plug the player and TV mains leads (AC power cords) into the mains. Step 6: Preparing the Remote You can control the player using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment. When using the remote, point it at the remote sensor on the player (page 12). 1 to AC IN 2 to mains b • Use the batteries correctly to avoid possible leakage and corrosion. Should leakage occur, do not touch the liquid with bare hands. Observe the following: – Do not use a new battery with an old battery, or batteries of different manufacturers. – Do not attempt to recharge the batteries. – If you do not intend to use the remote for an extended period of time, remove the batteries. – If battery leakage occurs, wipe out any liquid inside the battery compartment, and insert new batteries. • Do not expose the remote sensor (marked on the front panel) to strong light, such as direct sunlight or a lighting apparatus. The player may not respond to the remote. 28

Controlling TVs with the remote You can control the volume, input source, and power switch of your Sony TV with the supplied remote. b When you replace the batteries of the remote, the code number may be reset to the default setting. Set the appropriate code number again. TV t Number buttons TV [/1 2 +/– 1 While holding down TV [/1, enter the TV’s manufacturer code using the number buttons. For instance, to enter “09,” press “0” then “9.” Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Manufacturer Sony Hitachi 24 JVC 33 LG/Goldstar 76 Code number 01 (default) Panasonic 17, 49 Philips 06, 08, 72 Samsung 71 Sharp 29 Toshiba 38 Hookups and Settings Available buttons Depending on the connected unit, you may not be able to control your TV with some or all of the buttons (TV [/1, TV t, or 2 +/ –). Buttons TV [/1 TV t (TV input select) Operations Turns your TV on or off. Switches your TV’s input source between the TV and other input sources. 2 (volume) +/– Adjusts the volume of your TV. To control other TVs with the remote You can control the volume, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer’s code. b If you enter a new code number, the code number previously entered will be erased. 2 Release TV [/1. 29