Views
6 months ago

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Step 7: Easy Setup

Step 7: Easy Setup Follow the steps below to make the minimum number of basic adjustments for using the player. If you do not complete Easy Setup, it will appear each time you turn on your player. Make the settings below in the following order. When turned on for the first time Wait for a short while before the player turns on and starts Easy Setup. 4 Select a language for the on-screen displays using M/m, and press ENTER. The initial settings message appears. 5 Select “Start,” and press ENTER. TV [/1 [/1

7 Make the appropriate settings depending on the cables connected to your TV. When you select “HDMI” in step 6 1 Select “Start,” and press ENTER. The test screen appears for about 30 seconds. Example: when the video output resolution is set to 1080i b If no picture appears, press RETURN to return to the previous screen, and change the resolution setting. 2 Select “Finish,” and press ENTER. The display asks for confirmation. 3 Select “OK” or “Cancel,” and press ENTER. When you select “Video or S Video” in step 6 Select an aspect ratio that matches your TV, and press ENTER. Hookups and Settings Current video output resolution setting b If no picture appears, press RETURN to return to step 6, and select “Component Video.” 2 Select “Finish,” and press ENTER. The display asks for confirmation. 3 Select “OK” or “Cancel,” and press ENTER. When you select “Component Video” in step 6 1 Select a video output resolution for the connected TV, and press ENTER. For details about the video output resolution, see page 49. Select “16:9” when connecting to a widescreen TV or a TV with a wide mode function. Select “4:3” when connecting to a 4:3 screen TV without a wide mode function. 8 Select “Allow” to allow Internet connections from BD contents, and press ENTER. Select “Do not allow” to not allow Internet connections from BD contents. The test screen appears for about 30 seconds. For the test screen, see “When you select “HDMI” in step 6” (above). ,continued 31