Views
7 months ago

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Audio DRC Selects the

Audio DRC Selects the dynamic range (compression level of the sound) setting when playing a BD or DVD that conforms to “Audio DRC.” Auto Standard TV Mode Wide Range Performs playback at the dynamic range specified by the disc (BD-ROM only). Other discs are played back at the “Standard” level. Performs playback at a compression level between “TV Mode” and “Wide Range.” Sounds are compressed heavily. Low sounds are easier to hear. No compression works. A more dynamic sound is produced. b • “Audio DRC” is effective only when playing Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio signals. • When “Dolby Digital” is set to “Dolby Digital” in the “Audio Settings” setup (page 51), “Audio DRC” has no effect on the audio output from the DIGITAL OUT (OPTICAL/COAXIAL) jack. However, this excludes the following cases. – when “BD Audio Setting” is set to “Mix” when playing a BD. – when “Audio Output Priority” is set to “HDMI” or “Stereo Analogue.” Downmix Sets the downmix method of multi-channel to two-channel sound. Dolby Surround Normal Outputs the Dolby Surround (Pro Logic) signals in 2 channels. Select this when connecting an audio device that supports Dolby Surround (Pro Logic). Outputs audio signals without Dolby Surround (Pro Logic) effect. Select this when connecting an audio device that does not support Dolby Surround (Pro Logic). b “Downmix” has no effect on the bitstream audio output from the DIGITAL OUT (OPTICAL/ COAXIAL)/HDMI OUT jack. 52

BD/DVD Viewing Settings The default settings are underlined. BD/DVD Menu Selects the default menu language for BD- ROMs or DVD VIDEOs. When you select “Select Language Code,” the display for entering the language code appears. Enter the code for your language by referring to “Language Code List” (page 75). Audio Selects the default track language for BD- ROMs or DVD VIDEOs. When you select “Original,” the language given priority in the disc is selected. When you select “Select Language Code,” the display for entering the language code appears. Enter the code for your language by referring to “Language Code List” (page 75). 4 Select the age restriction, and press ENTER. The lower the value, the stricter the limitation. If you select “Select Age Restriction,” you can enter the age from “0” to “255” using