Views
8 months ago

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Sony BDP-S560 - BDP-S560 Consignes d’utilisation Anglais

Audio Output Signals and

Audio Output Signals and Player Settings The audio output signals differ, depending on the source, output jack, and the AV amplifier (receiver) you use. To enjoy the sound you want, check the support audio format of the AV amplifier (receiver), the connection to the AV amplifier (receiver), and the “Audio Settings” setup pattern according to the tables below. To enjoy Disc/source Audio output signal Connections and settings AV amplifier (receiver) support audio format Player audio jack *1 “Audio Settings” setup pattern BD DVD HD Audio *3 HD Audio *2 Up to 7.1ch LPCM *3 Multi-channel LPCM HDMI OUT A HD Audio *2 Dolby Digital/DTS Dolby Digital/DTS Dolby Digital/DTS *4 Dolby Digital/DTS DIGITAL OUT C Dolby Digital/ DTS Dolby Digital/DTS “Audio Settings” setup table Setup pattern 7.1ch LPCM/ 5.1ch LPCM Dolby Digital/ DTS Audio Output Priority *5 (page 50) Dolby Digital/DTS HDMI OUT DIGITAL OUT Up to 7.1ch LPCM Multi-channel LPCM HDMI OUT A 7.1ch LPCM/ 5.1ch LPCM Multi-channel LPCM HDMI OUT B 2ch LPCM 2ch LPCM DIGITAL OUT C Dolby Digital/DTS Audio (HDMI) *6 (page 50) AB HDMI Auto Dolby Digital/DTS BD Audio Setting (page 51) A Direct B Mix or Direct HDMI OUT DIGITAL OUT DTS *6 (page 51) A C B C Dolby Digital *6 (page 51) — — C Coaxial/Optical — — DTS Dolby Digital *1 When connecting to the LINE OUT (R-AUDIO- L) jacks, 2-channel signals are output. *2 HD Audio includes Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio, and DTS- HD High Resolution Audio formats. *3 For Dolby TrueHD and DTS-HD Master Audio, set “HDMI Resolution” of “Output Video Format” to other than “480i/576i” or “480p/ 576p” in the “Video Settings” setup (page 48). *4 The 2-channel or less-channel primary/ secondary audio signals are output as 2-channel LPCM signals. *5 The 2-channel LPCM signals are output from output jacks other than priority jacks. *6 The 2-channel LPCM signals are output in the following cases: – when “Audio (HDMI)” is set to “2ch PCM” in the “Audio Settings” setup. – when “Dolby Digital”/“DTS” is set to “Downmix PCM” in the “Audio Settings” setup. – when you play a DVD that contains MPEG Audio. 72

About Wireless LAN Security Since communication via the wireless LAN function is established by radio waves, the wireless signal may be susceptible to interception. To protect wireless communication, this player supports various security functions. Be sure to correctly configure the security settings in accordance with your network environment. No Security Although you can easily make settings, anyone can intercept wireless communication or intrude into your wireless network, even without any sophisticated tools. Keep in mind that there is a risk of unauthorized access or interception of data. WEP WEP applies security to communications to prevent outsiders from intercepting communications or intruding into your wireless network. WEP is a legacy security technology that enables older devices, which do not support TKIP/AES, to be connected. WPA-PSK (TKIP) TKIP is a security technology developed to correct for the deficiencies of WEP. TKIP assures a higher security level than WEP. WPA-PSK (AES), WPA2-PSK (AES) AES is a security technology that uses an advanced security method that is distinct from WEP and TKIP. AES assures a higher security level than WEP or TKIP. Specifications System Laser: Semiconductor laser Inputs and outputs (Jack name: Jack type/Output level/Load impedance) LINE OUT R-AUDIO-L: Phono jack/2 Vrms/10 kilohms DIGITAL OUT (OPTICAL): Optical output jack/–18 dBm (wave length 660 nm) DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms HDMI OUT: HDMI 19-pin standard connector COMPONENT VIDEO OUT (Y, PB/CB, PR/CR): Phono jack/Y: 1.0 Vp-p/ PB/CB, PR/CR: 0.7 Vp-p/75 ohms LINE OUT VIDEO: Phono jack/1.0 Vp-p/75 ohms LINE OUT S VIDEO: 4-pin mini DIN/ Y: 1.0 Vp-p, C: 0.3 Vp-p/75 ohms LAN (100): 100BASE-TX Terminal EXT: External memory slot (For connecting the external memory) DC output: 5 V 500 mA Max USB: USB jack Type A (For connecting digital still camera and USB memory) Wireless Wireless LAN standard: IEEE802.11a/b/g IEEE802.11n draft 2.0 Frequency range: European models: 2.4 GHz band: Channels 1-13 5 GHz band: Channels 36-64, 100-140 Australian/New Zealand models: Australia only 2.4 GHz band: Channels 1-13 5 GHz band: Channels 36-64, 100-116, 132-140, 149-165 New Zealand only 2.4 GHz band: Channels 1-13 5 GHz band: Channels 36-64, 100-140, 149-165 Modulation: DS-SS Modem and OFDM Modem Additional Information ,continued 73