Sony NEX-C3A - NEX-C3A Consignes d’utilisation Anglais
Preparing the battery pack When using the camera for the first time, be sure to charge the NP-FW50 “InfoLITHIUM” battery pack (supplied). x Charging the battery pack The “InfoLITHIUM” battery pack can be charged even when it has not been fully depleted. It can also be used when it has not been fully charged. Preparing the camera 1 2 Insert the battery pack onto the battery charger. • Push the battery pack until it clicks. Connect the battery charger to For the U.S.A and Canada the wall outlet (wall socket). Plug • The CHARGE lamp turns off when charging is finished. • Time required to charge a fully depleted battery pack at a temperature of 25 °C (77 °F) is about 250 minutes. CHARGE lamp For countries/regions other than the U.S.A. and Canada CHARGE lamp Power cord (mains lead) GB 14
Notes • The charging time differs depending on the remaining capacity of the battery pack or charging conditions. • We recommend charging the battery pack in an ambient temperature of between 10 °C to 30 °C (50 °F to 86 °F). You may not be able to efficiently charge the battery pack outside of this temperature range. • Connect the battery charger to the nearest wall outlet (wall socket). • The CHARGE lamp may flash quickly when the battery pack is used for the first time, or the battery pack has not been used for a long time. In such cases, remove the battery pack from the charger and re-attach it, then charge the battery pack. • Do not try to charge the battery pack again right after it has been charged, or when it has not been used after being charged. Doing so will affect the performance of the battery pack. z Using your camera abroad — Power source You can use your camera and battery charger, and the AC-PW20 AC Adaptor (sold separately) in any countries/regions where the power supply is within 100 V to 240 V AC, 50 Hz/60 Hz. An electronic voltage transformer is unnecessary and its use may cause a malfunction. Preparing the camera x Inserting the charged battery pack 1 While sliding the cover open lever, open the cover. GB 15
• The measurement method is based
Display Indication Memory card/Uplo
Learning more about the camera (α
• If you do not operate the camer
The image is whitish (Flare). Blurr
On using the lenses and accessories
• Do not aim the camera at the su
USB communication: Hi-Speed USB (US
BC-VW1 Battery charger Input rating
Index Numerics 3D Sweep Panorama...
U Upload Settings..................