Sony NEX-C3A - NEX-C3A Consignes d’utilisation Anglais
2 Firmly insert the battery pack all the way while pressing the lock lever with the tip of the battery. Lock lever Preparing the camera 3 Close the cover. x Checking the remaining battery level Check the level with the following indicators and percent figures displayed on the LCD monitor. Battery level High Low “Battery exhausted.” You cannot shoot any more image. Note • The displayed level may not be correct under certain circumstances. z What is an “InfoLITHIUM” battery pack? An “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions for exchanging information related to operating conditions with your camera. Using the “InfoLITHIUM” battery pack, the remaining battery time in percent figures is displayed according to the operating conditions of your camera. GB 16
x Removing the battery pack Turn off the camera and slide the lock lever in the direction of the arrow after you confirm that the access lamp is not lit. Be careful not to drop the battery pack. Lock lever Attaching/removing the lens The camera will come with the lens attached. Refer to the steps below when attaching other lenses. Set the power switch of the camera to OFF before you attach or remove the lens. 1 2 If the cap or the packaging lid is attached, remove it from the camera or the lens. • Quickly change the lens somewhere away from dusty locations so as to keep dust or debris from getting inside the camera. Mount the lens by aligning the white index marks on the lens and the camera. • Hold the camera’s face downward to prevent the dust from entering into the camera. Preparing the camera White index marks GB 17
Display Indication Memory card/Uplo
Learning more about the camera (α
• If you do not operate the camer
The image is whitish (Flare). Blurr
On using the lenses and accessories
• Do not aim the camera at the su
USB communication: Hi-Speed USB (US
BC-VW1 Battery charger Input rating
Index Numerics 3D Sweep Panorama...
U Upload Settings..................