Views
7 months ago

Sony NEX-C3A - NEX-C3A Consignes d’utilisation Anglais

Sony NEX-C3A - NEX-C3A Consignes d’utilisation Anglais

Preset white balance ( )

Preset white balance ( ) 1 [Menu] t [Brightness/Color] t [White Balance] t desired mode. 2 As necessary, [Option] t adjust the color tone. Adjusting it toward + turns the image reddish and adjusting it toward – turns the image bluish. C.Temp./Filter 1 [Menu] t [Brightness/Color] t [White Balance] t [C.Temp./Filter]. 2 [Option] t desired value. Color Temp. Color Filter Custom white balance The higher the number, the more reddish the image, and the lower the number, the more bluish the image. (The default setting is 5500 K.) Based on using the set color temperature as the standard, the color can be compensated to G (Green) or M (Magenta). The higher the number, the more the color is compensated. (The default setting is 0.) 1 [Menu] t [Brightness/Color] t [White Balance] t [Custom Setup]. 2 Hold the camera so that the white area fully covers the AF area located in the center, and then press the shutter button down. The shutter clicks and the calibrated values (color temperature and color filter) are displayed. 3 To call the custom white balance setting, [Menu] t [Brightness/Color] t [White Balance] t [Custom]. Table of contents Sample photo search Menu search Index Note • If the flash is used when the shutter button is pressed, a custom white balance is registered with the flash light taken into account. Take pictures with the flash in later shootings. 78 GB

Metering Mode Selects the metering mode that sets which part of the subject to measure to determine the exposure. 1 [Menu] t [Brightness/Color] t [Metering Mode] t desired mode. Notes (Multi) (Center) (Spot) Measures light on each area after dividing the total area into multiple areas and determines the proper exposure of the entire screen (Multi-pattern metering). Measures the average brightness of the entire screen, while emphasizing the central area of the screen (Center-weighted metering). Measures only the central area (Spot metering). This function is useful when the subject is backlit or when there is strong contrast between the subject and the background. Spot metering cross hairs position on the subject. • If you set [Metering Mode] to other than [Multi], the [Face Detection] function cannot be used. • [Multi] is selected when using the following functions: – Movie recording – [Intelligent Auto] – [Scene Selection] – [Picture Effect] – [Precision Dig. Zoom] – [Smile Shutter] Table of contents Sample photo search Menu search Index 79 GB