29.03.2018 Views

All Make Van Product Guide

The All Make Van Product Guide contains all universal products, as well as a reduced selection of vehicle-specific products.

The All Make Van Product Guide contains all universal products, as well as a reduced selection of vehicle-specific products.

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SHELVING TIPS & TRICKS<br />

INSTALLING DIVIDER SHELVING OVER A WHEEL WELL<br />

PLAN YOUR INSTALL!<br />

When installing Westcan products into your vehicle, it’s important<br />

that all installation procedures are followed correctly. Be mindful of<br />

the order in which you are piecing together your items, as this can<br />

cause problems with installation. Read all installation instructions<br />

thoroughly before beginning the building or installation processes<br />

to ensure the smoothest install possible.<br />

STEPS FOR SHELVING UNIT INSTALLATION<br />

Shelving with locking door front and evenly spaced decks.<br />

1<br />

2<br />

3<br />

4<br />

PICK YOUR SHELVING PACKAGE<br />

Whether you are building your own shelving package or installing<br />

one of our complete shelving units, knowing your shelving<br />

package configuration before putting it together is a must.<br />

INSTALL YOUR BOTTOM SHELF<br />

To start putting together your shelving unit, install the bottom<br />

shelf first. Ensure that the bottom of the shelf is above wheel<br />

well height to avoid collisions and installation issues.<br />

INSTALL YOUR TOP SHELF<br />

Place your top shelf at a height that is comfortable for you<br />

to reach, whether that is near the top of your end panels or<br />

several inches further down.<br />

DETERMINE PLACEMENT OF SHELVING ACCESSORIES<br />

If you are using locking door fronts, thoroughly read the<br />

instructions that come with them before proceeding any<br />

further with your shelf installation. The door instructions<br />

will give you the clearance measurement between shelves<br />

required for the door fronts to fit properly.<br />

Shelving with decks spaced for various cargo heights.<br />

5<br />

6<br />

7<br />

SPACE OUT YOUR OTHER SHELVES<br />

If you have no locking door fronts installed, any remaining<br />

shelves may be spaced out evenly and installed.<br />

ADJUST SHELVES ACCORDING TO PLANNED PRODUCT HEIGHT<br />

If you know your customer intends to carry taller or shorter<br />

items on their shelving that might require uneven spacing,<br />

you may adjust the shelving deck positions accordingly.<br />

ADD ON A RETAINER LIP FOR ADDITIONAL “SHELF” SPACE<br />

Although the wheel well may be taking up some of the space<br />

beneath your shelving unit, by adding a retainer lip, you<br />

create additional “shelf” space where items from boxes to<br />

stray cords can be tucked away and kept safely out of your<br />

walking floor space to prevent tripping and injury.<br />

56<br />

1-877-795-7733

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!