Views
6 months ago

Sony VPCZ23V9R - VPCZ23V9R Mode d'emploi Anglais

Sony VPCZ23V9R - VPCZ23V9R Mode d'emploi Anglais

Customizing Your VAIO

Customizing Your VAIO Computer > Setting the Password n124 N To add the power-on password (user password) ! Make sure you set the machine password before setting the user password. 1 Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears. The BIOS setup screen appears. If the screen does not appear, restart the computer and try again. ! The VAIO logo does not appear when Fast BIOS Startup Settings on the VAIO Control Center is enabled. Disable the settings with the VAIO Control Center (page 160). 2 Enter the machine password and press the Enter key. 3 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the Enter key. 4 On the password entry screen, enter the password twice and press the Enter key. The password can be up to 32 alphanumeric characters long (including spaces). 5 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key.

Customizing Your VAIO Computer > Setting the Password n125 N To change or remove the power-on password (machine password) 1 Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears. The BIOS setup screen appears. If the screen does not appear, restart the computer and try again. ! The VAIO logo does not appear when Fast BIOS Startup Settings on the VAIO Control Center is enabled. Disable the settings with the VAIO Control Center (page 160). 2 Enter the machine password and press the Enter key. 3 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the Enter key. 4 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key. To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter key. 5 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key.