Views
6 months ago

Sony VPCZ23V9R - VPCZ23V9R Mode d'emploi Anglais

Sony VPCZ23V9R - VPCZ23V9R Mode d'emploi Anglais

Troubleshooting >

Troubleshooting > Recovery / Recovery Media n162 N Recovery / Recovery Media How can I create Recovery Media? You can create Recovery Media using the VAIO Care (page 35). The media are used to restore your computer system to its factory default settings. ! If a docking station is not supplied with your computer, you need to connect an external optical disc drive (not supplied). See the Recovery, Backup and Troubleshooting Guide for more information. How can I restore my computer system to its factory default settings? There are two ways to recover your computer system: from Recovery Media and from the recovery area. See the Recovery, Backup and Troubleshooting Guide for more information. How can I reinstall the original software and drivers? You can restore the preinstalled software and drivers using the VAIO Care (page 35). See the help file included with the VAIO Care for more information. How do I check the volume of the recovery area? Your built-in storage device contains the recovery area where the data for the system recovery is stored. To check the volume of the recovery area, follow these steps: 1 Click Start, right-click Computer, and select Manage. 2 Click Disk Management under Storage in the left pane. The volume of the recovery area and the total volume of the C drive are displayed in the Disk 0 row in the center pane.

Troubleshooting > Recovery / Recovery Media n163 N How do I reduce the volume of the recovery area? Your built-in storage device contains the recovery area where the data for system recovery is stored. If your computer includes a solid state drive, you might want to minimize the recovery area by removing such data. 1 If you recover your computer from Recovery Media (optical discs) on the model without a docking station, connect an external optical disc drive (not supplied) to the computer and to an AC power source. 2 Insert the disc into the optical disc drive or connect the USB flash drive (not supplied) to the USB port while the computer is in Normal mode. ! Use Recovery Media you created upon delivery of your computer. You cannot use USB devices if you disable the USB ports in the BIOS setup screen. To enable the ports, follow the steps in Disabling Built-in Devices (page 135). 3 Turn off the computer and turn it on once again. ✍ If you are using the docking station, the external optical disc drive, or the USB flash drive, press the F11 key repeatedly until the VAIO logo disappears. However, when Fast BIOS Startup Settings on the VAIO Control Center is enabled, the VAIO logo does not appear. Disable the settings with the VAIO Control Center (page 160). 4 Press the M or m key to select VAIO Care Rescue and press the Enter key. 5 Click Tools and Start advanced recovery wizard. ✍ When the Do you need to rescue data? message appears, make a backup copy of your data, if needed.