Views
2 months ago

Sony HT-GT1 - HT-GT1 Mode d'emploi Anglais

Sony HT-GT1 - HT-GT1 Mode d'emploi Anglais

Sound Adjustment

Sound Adjustment Adjusting the sound To Do this Reinforce the bass and create a more powerful sound Select an audio Press AUDIO EQ equalizer preset Select a sound field preset Adjust the subwoofer volume level Turn off the sound 32 GB Press BASS BAZUCA. To return to normal sound, press the button again. repeatedly. To cancel the selected preset, press AUDIO EQ repeatedly to select “FLAT.” Press SOUND FIELD repeatedly. Press SW LEVEL repeatedly to select the desired volume level. To turn off the subwoofer, press SW LEVEL repeatedly to select “SW OFF.” Press MUTING. To turn on the sound again, press VOL +/−. Note The audio equalizer and sound field functions cannot be used at the same time. Creating your own audio equalizer setting You can raise or lower the levels of specific frequency bands, then store the setting in the memory as “CUSTOM EQ.” 1 Press OPTIONS. 2 Press / repeatedly to select “EQ EDIT,” then press . 3 Press / repeatedly to adjust the equalizer level, then press . Frequency band Equalizer level 4 Repeat step 3 to adjust the level of other frequency bands. To select a stored equalizer setting Press AUDIO EQ repeatedly to select “CUSTOM EQ.”

Other Operations Using the Party Chain function You can connect multiple audio systems in a chain to create a more interesting party environment and to produce higher sound output. A system in the chain will activate the Party Chain function as “Party Host” and share the music. Other systems will become “Party Guests” and play the same music as that being played by the “Party Host.” Setting up the Party Chain You can set up a Party Chain by connecting all the systems using audio cords (not supplied). Before connecting cords, be sure to disconnect the power cord. If all the systems are equipped with Party Chain function Example: When connecting using this system as the first system Second system Last system Continue the connection until the last system First system Other Operations Rear of the subwoofer ˎˎAny system can become a Party Host in this connection. ˎˎYou can change the Party Host to a new Party Host after the Party Chain function is activated on another Party Host. For details, see “To select a new Party Host” (page 35). ˎˎIn this connection, the last system must be connected to the first system. 33 GB