Views
8 months ago

Sony VPCZ13M9E - VPCZ13M9E Mode d'emploi Anglais

Sony VPCZ13M9E - VPCZ13M9E Mode d'emploi Anglais

Using Peripheral Devices

Using Peripheral Devices > Using the Noise Canceling Headphones n102 N Connecting the Noise Canceling Headphones To connect the noise canceling headphones Plug the headphones cable into the headphones jack i. The icon appears on the taskbar to indicate that the noise canceling function is enabled and a balloon message pops up from the icon. ✍ When the icon is on the taskbar, the noise canceling function is disabled. Right-click the icon and select Enable Noise Canceling Function from the menu. If no icon is on the taskbar, see What to do if the icon and the balloon do not appear (page 105) to change the settings.

Using Peripheral Devices > Using the Noise Canceling Headphones n103 N Adjusting the Effect of the Noise Canceling Function The noise canceling headphones supplied with your computer is configured to yield the optimum effect by default. If you feel that the noise canceling function is not fully in effect, you may be able to adjust the effect with the Noise Canceling Control slider on the Noise Canceling Headphones window. To adjust the effect of the noise canceling function 1 Right-click the icon on the taskbar and select Settings. ✍ If no icon is on the taskbar, see What to do if the icon and the balloon do not appear (page 105) to change the settings. 2 Drag the Noise Canceling Control slider toward Mic+ or Mic- to select your desired noise canceling level. ✍ The slider should be at the center of the range to yield the optimum level. Dragging the slider all the way to Mic+ does not bring the noise canceling function fully into effect. 3 Click Apply. 4 Confirm that the noise canceling effect is satisfactory and then click OK.