Views
9 months ago

Sony VPCZ13M9E - VPCZ13M9E Mode d'emploi Anglais

Sony VPCZ13M9E - VPCZ13M9E Mode d'emploi Anglais

Using Peripheral Devices

Using Peripheral Devices > Connecting a Port Replicator n106 N Connecting a Port Replicator Attaching an optional port replicator enables you to connect additional peripherals to your computer, such as a printer and an external display. Locating Ports on the Port Replicator A DC IN indicator Illuminates while the port replicator is powered. B DC IN port (page 18) C USB ports *1 (page 128) D DVI-D port (page 118) E MONITOR port (page 118) F Network (LAN) ports *2 (page 65) G Security slot *1 Compliant with the USB 2.0 standard. *2 The port replicator has a protective sticker covering each network (LAN) port. Connect a 10BASE-T, 100BASE-TX, 1000BASE-T cable to the network (LAN) port. Using an incorrect cable, such as a phone cable, may result in an electric current overload that can cause a malfunction, excessive heat, or fire in the network (LAN) port. ! Simultaneous use of the following ports is not possible. - HDMI output port on your computer - DVI-D port on the port replicator - MONITOR port on the port replicator

Using Peripheral Devices > Connecting a Port Replicator n107 N Attaching Your Computer to the Port Replicator ! Be sure to install the battery pack before attaching your computer to the port replicator. To attach your computer to the port replicator ! Be sure to use the AC adapter supplied with the port replicator. To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the port replicator. Do not move your computer when it is attached to the port replicator. This may detach the port replicator and cause damage to both units. The monitor port on your computer is not accessible when the computer is attached to the port replicator. Use the DVI-D or MONITOR port on the port replicator for connecting an external display. 1 Disconnect all peripherals and the AC adapter from the computer. 2 Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet. 3 Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the port replicator (4).