Views
3 months ago

Sony VPCZ13M9E - VPCZ13M9E Mode d'emploi Anglais

Sony VPCZ13M9E - VPCZ13M9E Mode d'emploi Anglais

Upgrading Your VAIO

Upgrading Your VAIO Computer > Adding and Removing Memory n150 N Removing and Installing a Memory Module To change or add a memory module 1 Shut down the computer and disconnect all peripheral devices. 2 Unplug the computer and remove the battery pack. 3 Wait about an hour until the computer cools down. 4 Unscrew two screws (indicated by the arrows below) on the bottom of the computer and remove the memory module compartment cover. 5 Touch a metal object to discharge static electricity.

Upgrading Your VAIO Computer > Adding and Removing Memory n151 N 6 Remove the currently installed memory module as follows: ❑ Pull the latches in the direction of the arrows (1). The memory module is released. ❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). 7 Remove the new memory module from its packaging.