Views
8 months ago

Sony VPCZ13M9E - VPCZ13M9E Mode d'emploi Anglais

Sony VPCZ13M9E - VPCZ13M9E Mode d'emploi Anglais

Using Your VAIO Computer

Using Your VAIO Computer > Using the TPM n 92 N ❑ ❑ ❑ ❑ Key and certificate backup file Default file name: SpBackupArchive.xml PSD backup file Default file name: -Personal Secure Drive.fsb Owner password backup file Default file name: SpOwner_.tpm Protocol file Default file name: SpProtocol__..txt

Using Your VAIO Computer > Using the TPM n 93 N Configuring the TPM To use the embedded TPM, you need to: 1 Enable the TPM in the BIOS setup screen. 2 Install the Infineon TPM Professional Package. 3 Initialize and configure the TPM. To enable the TPM in the BIOS setup screen 1 Turn on your computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If the screen does not appear, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Press the < or , key to select the Security tab, the M or m key to select Change TPM State, and then the Enter key. 4 Press the M or m key to select Enable and then the Enter key. 5 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. 6 After your system restarts, select Execute in the confirmation window and then press the Enter key. ✍ You can also disable the TPM and clear the TPM configuration in the BIOS setup screen. ! Before enabling the TPM, be sure to set the power-on password to protect against unauthorized modification of the TPM configuration. If the TPM is enabled, it will take longer before the VAIO logo appears due to security checks at computer startup. You will not be able to access any TPM-protected data if you clear the TPM ownership. Before clearing the TPM configuration, be sure to make backup copies of the TPM-protected data.