Peripherals n147 N Peripherals What should I do if I cannot connect a USB device? ❑ ❑ ❑" />
 
Views
9 months ago

Sony VPCEF3E1E - VPCEF3E1E Mode d'emploi Anglais

Sony VPCEF3E1E - VPCEF3E1E Mode d'emploi Anglais

Troubleshooting >

Troubleshooting > "Memory Stick" n146 N "Memory Stick" What should I do if I cannot use "Memory Stick" that was formatted on a VAIO computer on other devices? You may need to reformat your "Memory Stick". Formatting "Memory Stick" erases all data, including music data previously saved on it. Before you reformat "Memory Stick", back up important data and confirm that "Memory Stick" does not contain files you want to keep. 1 Copy the data from "Memory Stick" onto your built-in storage device to save data or images. 2 Format "Memory Stick" by following the steps in Formatting "Memory Stick" (page 46). Can I copy images from a digital camera using "Memory Stick"? Yes, and you can view video clips that you have recorded with digital cameras that are compatible with "Memory Stick". Why can't I write data to "Memory Stick"? Some versions of "Memory Stick" are equipped with an erasure prevention switch to protect data from unintentional erasure or overwriting. Make sure the erasure prevention switch is off.

Troubleshooting > Peripherals n147 N Peripherals What should I do if I cannot connect a USB device? ❑ ❑ ❑ ❑ ❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to an AC outlet. Try using another USB port on your computer. The driver software could be installed to the specific port you used the first time you connected the device. See the manual that came with your USB device for more information. You may need to install software before you connect the device. Try connecting a simple, low-powered device such as a mouse to test if the port is working at all. USB hubs may prevent a device from working because of a power distribution failure. We recommend you connect the device directly to your computer without a hub.