Views
2 weeks ago

Sony VPCEF3E1E - VPCEF3E1E Mode d'emploi Anglais

Sony VPCEF3E1E - VPCEF3E1E Mode d'emploi Anglais

Getting Started > Using

Getting Started > Using the Battery Pack n 20 N ✍ Keep the battery pack in your computer while it is directly connected to an AC power source. The battery pack continues to charge while you are using the computer. When the battery pack is running out of power and both the charge and power indicator lights blink, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack. Your computer is supplied with a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect the life of battery. While some software applications or peripheral devices are in use, your computer may not enter Hibernate mode even when the remaining battery life becomes short. To avoid loss of data while the computer is running on the battery, you should save your data frequently and manually activate a power management mode, such as Sleep or Hibernate. If the battery pack runs out of power while the computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is impossible. To avoid loss of data, you should save your data frequently.

Getting Started > Using the Battery Pack n 21 N Checking the Battery Charge Capacity The battery charge capacity gradually decreases as the number of battery charging increases or the duration of use of the battery pack extends. To get the most out of the battery pack, check the battery charge capacity and change the battery settings. To check the battery charge capacity 1 Click Start, All Programs, and VAIO Control Center. 2 Click Power Management and Battery. ✍ Additionally, you can enable the battery care function to extend the life of the battery pack.