Views
3 months ago

Sony VPCSB1C5E - VPCSB1C5E Mode d'emploi Anglais

Sony VPCSB1C5E - VPCSB1C5E Mode d'emploi Anglais

Customizing Your VAIO

Customizing Your VAIO Computer > Protecting Data from Unauthorized Use n134 N To disable built-in devices 1 Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears. The BIOS setup screen appears. If the screen does not appear, restart the computer and try again. 2 Press the < or , key to select Advanced. 3 Press the M or m key to select your desired built-in device, and press the Enter key. 4 Press the M or m key to select Disabled and press the Enter key. ✍ To enable the device, select Enabled instead of Disabled. 5 If you want to disable more built-in devices, repeat steps 4 and 5 for each device. 6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key.

Customizing Your VAIO Computer > Protecting the Hard Disk n135 N Protecting the Hard Disk If your computer is equipped with a built-in hard disk drive, then the hard disk drive protection function is available. This function protects your hard disk drive against shock hazards. See the specifications to find out about the configuration of your computer. ! Be aware that the hard disk drive protection function does not work for the solid state drive. The hard disk drive protection function is designed to minimize possibilities of damage to hard disk drives and user data. It does not ensure 100% data protection under any circumstances.