Views
7 months ago

Sony VPCSB1C5E - VPCSB1C5E Mode d'emploi Anglais

Sony VPCSB1C5E - VPCSB1C5E Mode d'emploi Anglais

Upgrading Your VAIO

Upgrading Your VAIO Computer > Adding and Removing Memory n140 N 6 Remove the currently installed memory module as follows: ❑ Pull the latches in the direction of the arrows (1). The memory module is released. ❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). 7 Remove the new memory module from its packaging.

Upgrading Your VAIO Computer > Adding and Removing Memory n141 N 8 Slide the memory module into the memory module slot and push it in until it clicks into place. ! Do not touch any components on the motherboard other than the memory module. Be careful not to touch the wires and the projections inside the bottom cover. Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open slot. Do not force the memory module into the slot in a wrong orientation, as it may cause damage to the slot and the module. 9 Replace the cover and the removed screws and then tighten the screws. 10 Turn on the computer.