Views
2 months ago

Sony VPCSB1C5E - VPCSB1C5E Mode d'emploi Anglais

Sony VPCSB1C5E - VPCSB1C5E Mode d'emploi Anglais

Getting Started > Using

Getting Started > Using the Battery Pack n 22 N Using the Battery Pack The battery pack is already installed on your computer at the time of delivery but is not fully charged. ! Do not use your computer without installing the battery pack as it may cause the computer to malfunction. Installing/Removing the Battery Pack ✍ In order to distinguish the battery pack which is installed on your computer at the time of delivery from an extended battery pack (supplied with selected models only), it may be referred to as the primary battery pack in this manual. For detailed instructions on how to attach and charge an extended battery pack, see the manual that came with your extended battery pack. To install the battery pack 1 Turn off the computer, close the LCD screen lid, and unplug the AC adapter if plugged. 2 Unscrew the two screws (1), slide the bottom cover in the direction of the arrow (2), and remove the cover. ! Be careful not to lose the removed screws. Be careful not to touch the wires and the projections inside the bottom cover.

Getting Started > Using the Battery Pack n 23 N 3 Slide the battery pack into the battery compartment in the direction of the arrow. 4 Push the battery pack down into the compartment until the projection (3) clicks into place.