Views
4 months ago

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

Set the date and time

Set the date and time again. [129] Troubleshooting Warning indicators and messages Warning indicators and error messages Warning indicators and error messages Battery indicator (Remaining battery is low) When the battery level is low, is displayed. Charge the battery pack immediately. ERROR Turn the power off and then on again. An unknown error has occurred on USTREAM, when using the Live Streaming function. Wait a moment and then try confirming the connection again. HEAT The camera temperature has risen. The power may turn off automatically, or you may be unable to record images. Leave the camera in a cool location until the temperature goes down. If you record images for an extended period, the camera temperature rises. In this case, stop recording images. NoIMG The memory card does not contain playable images. LowPw There is no remaining battery charge. BATT Battery charge is insufficient for operation. The battery pack is delivering current exceeding the maximum discharge current (beyond which proper operation of the camera cannot be assured when an external microphone, etc., is connected). A different battery pack is detected when the camera is powered on. Battery pack deterioration is detected. SHORT The remaining capacity of the memory card is insufficient for loop recording. FULL Remaining capacity of the memory card is insufficient for recording. MAX

The maximum number of files that can be recorded has been reached. MEDIA The memory card is not inserted properly. The memory card is damaged. The memory card does not support XAVC S movie recording. NoCRD There is no memory card inserted. NoDSP The camera is not connected to a TV when playback is started. PLANE When the airplane mode is set to [ON], GPS and Wi-Fi cannot be used. NoSET Set the necessary settings for USTREAM using “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings. Auth Log in to USTREAM again and confirm the settings using “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings. CHANL The channel set by “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings is incorrect. This message also displays if other media starts streaming on the same channel while streaming from your camera is performed. Set the channel again. DATE Set the date and time again on your camera. APErr Access point has been found but is not connected. Check the password of the access point and connect again. PREP The network is temporarily unavailable. Netwk The saving settings of video cannot be saved to USTREAM because an error has occurred on the network. Some other network error has occurred. Confirm the setting of the access point or the security of the access point using “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings.