Views
1 month ago

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

1: microSD card 2:

1: microSD card 2: Memory Stick Micro (Mark2) media : Terminal side : Printed side 3. Close the cover. To eject the memory card Open the cover, then lightly push the memory card once. Note Insert the memory card properly, confirming each side is facing the correct direction. Confirm the direction of the memory card. If you forcibly insert the memory card in the wrong direction, the memory card, memory card slot, or image data may be damaged. Format the memory card before use. Save important data on the memory card on other media such as a computer, before formatting the memory card. Do not insert anything other than the compliant size of memory card into the memory card slot. Otherwise, a malfunction may result. When inserting or ejecting the memory card, be careful to prevent the memory card from popping out and dropping. [7] How to use Getting Started Inserting a memory card The memory cards that can be used with the camera The memory cards that can be used with the camera are listed below. SD card

In this guide, microSD memory cards are referred to as microSD card. The microSD memory card that can be used with the camera are as follows. microSD memory card microSDHC memory card microSDXC memory card Memory Stick media In this guide, Memory Stick media is referred to as Memory Stick Micro (Mark2) media card. The Memory Stick Micro (Mark2) media that can be used with the camera is as follows. Memory Stick Micro (Mark2) media Note Operation with all memory cards is not assured. Use an SDXC card faster than Class10 when recording movies in XAVC S. Use an SDXC UHS-I memory card (U3) when recording movies with 100 Mbps (FDR- X1000V only). The capacity of the memory card is up to 64GB. [8] How to use Getting Started Using the Tripod Adaptor Using the tripod adaptor (HDR-AS200V only) By attaching the tripod adaptor to the camera, you can attach accessories to the camera without using the waterproof case. 1. Fix the screw of the tripod adaptor in the tripod adaptor attachment hole of the camera. 2. Match the bottom of the camera and fix firmly with the tripod screw in the direction of the arrow.