Views
2 weeks ago

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

During takeoff and

During takeoff and landing of an airplane, set the airplane mode to [ON]. Use GPS in accordance with the regulations of the place or situation. It may take from several tens of seconds to several minutes to record the location information when you use the GPS for the first time or use it again after long intervals. Triangulating time can be shortened by taking in GPS assist data. Do not cover the GPS sensor with your finger when searching for GPS satellites or when triangulating. This decreases the sensitivity of the GPS sensor and triangulation may fail. Sony does not collect location information and routing information. To display location information and routing information as a map on a computer, Sony provides data of location information and routing information to Google Inc. Although the camera does not have the function to delete log files, you can delete them by formatting the media. The maximum number of log files that can be recorded is 256/day. When the maximum number of recorded log files is reached, you can continue to shoot images, but cannot record log files. [44] How to use Changing the Settings Camera settings Airplane mode When you are in an airplane or another restricted place, you can set the camera to temporarily disable all functions related to the wireless applications such as Wi-Fi/GPS, etc. If you set the airplane mode to [ON], an airplane mark will be displayed on the display panel. 1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [PLANE], then press the ENTER button. 2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button. ON: Select this when you are on board an airplane (The Wi-Fi/GPS function is disabled). OFF: Select this for normal use (The Wi-Fi/GPS function is enabled).

BACK: Returns to the [PLANE] menu. [45] How to use Changing the Settings Camera settings Mount Register the place of installation to the camera in advance. If you start shooting after registering the place of installation, the camera will detect every highlighted scene allowing you to make an appealing highlight movie with the Highlight Movie Maker. 1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [MOUNT], then press the ENTER button. 2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button. BODY: Select this function when the camera is attached to the person shooting the movie. Mount example: head mount, chest mount, backpack mount, wrist mount, monopod OTHER: Select this function when the camera is attached to a board, bicycle, etc. Mount example: roll bar mount, handle bar mount, surfboard mount, suction cup mount BACK: Returns to the [MOUNT] menu. [46] How to use Changing the Settings Camera settings Time Code/User Bit