Views
1 week ago

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

About time code Time

About time code Time code is a useful function for advanced image editing, which records hours/minutes/seconds/frames on the image data. About user bit User bit is a function that can record information (8-digit hexadecimal numbers) such as date/time/scene number. This function is useful for editing movies created using two or more cameras. 1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [TC/UB], then press the ENTER button. 2. Press the NEXT button or PREV button to select [DISP], [TCSET] or [UBSET], then press the ENTER button. When selecting [DISP] TC: Displays the time code. U-BIT: Displays the user bit. OFF: Does not display the time code/user bit. When selecting [TCSET] PrSet: Sets the time code. Set four 2-digit numbers, then press the ENTER button. The time code can be selected within the following range.

When selecting 30p or 60p 00:00:00:00 - 23:59:59:29 When selecting 25p or 50p 00:00:00:00 - 23:59:59:24 When selecting 24p, you can set the last 2 time code digits of the frames in multiples of 4, between 0 and 23. RESET: Initializes the time code. Press the ENTER button to display [SURE?] while [OK] is displayed, then press the ENTER button again. FORMT: Selects the time code recording method. DF: Records the time code in drop frame. NDF: Records the time code in non-drop frame. In the following situations, the time code is fixed to [NDF]. When [VMODE] is set to 24p When [V.SYS] is set to [PAL] RUN: Sets how the time code advances. REC: The time code advances only while recording XAVC S movies. It is recorded sequentially from the time code on the image recorded last time. FREE: The time code advances sequentially, regardless of the operation of the camera. MAKE: Sets the time code to be recorded. PrSet: The newly set-up time code is recorded on recording media. REGEN: The last time code of the previous recording is read out from the recording media and the new time code is recorded sequentially from the last time code.