Views
1 week ago

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

and power is supplied to

and power is supplied to the camera from a device connected via USB. You can shoot and playback images using USB Power supply, however the battery pack is not charged simultaneously. How to supply power from a wall outlet (wall socket) Use the USB charger AC-UD10 (sold separately). To connect the camera to the charger, use the micro USB cable (supplied). [50] How to use Changing the Settings Camera settings Auto power off You can change the setting of the auto power off function. 1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [A.OFF], then press the ENTER button. 2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button. 20sec: Turns the power off after about 20 seconds. 60sec: Turns the power off after about 60 seconds. OFF: Does not turn off automatically. BACK: Returns to the [A.OFF] menu. Note Auto power off is not available in the following situations. When recording data to media

When shooting movies, or shooting in Interval photo recording mode During movie playback When Wi-Fi connection is being established, Wi-Fi remote control is connected, an image is being uploaded to a smartphone, or live streaming HDMI connection is being made. Supplying power from a connected USB device Connecting a mass storage device IR-remote control is set to ON. In the following cases, even if you have selected [20sec] or [60sec] in the auto power off function, the time that elapses before the power turns off will be extended. While adjusting [SETUP] settings While playing back still images When [Wi-Fi] is set to [ON] and the Wi-Fi icon is displayed. [51] How to use Changing the Settings Camera settings Beep You can set the audible notification of operations ON/OFF. 1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [BEEP], then press the ENTER button. 2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button. ON: All operation sounds are enabled. SILNT: Operation sounds are emitted for the following operations only. Power turned on Recording started Recording stopped Shutter pressed A disabled operation was selected or an error occurred Wi-Fi connection confirmation beep