Views
6 months ago

Sony VPCCW2C5E - VPCCW2C5E Mode d'emploi Anglais

Sony VPCCW2C5E - VPCCW2C5E Mode d'emploi Anglais

Troubleshooting >

Troubleshooting > Recovery n126 N How do I check the volume of the recovery partition? Your built-in storage device contains the recovery partition where the data for the system recovery is stored. To check the volume of the recovery partition, follow these steps: 1 Click Start, right-click Computer, and select Manage. 2 Click Disk Management under Storage in the left pane. The volume of the recovery partition and the total volume of the C drive are displayed in the Disk 0 row in the center pane.

Troubleshooting > Battery Pack n127 N Battery Pack How do I find the battery charging status? You can check the charge indicator for the battery charging status. See Charging the Battery Pack (page 22) for more information. When is my computer using AC power? When your computer is connected to an AC outlet with the AC adapter, it uses AC power, even if the battery pack is installed. When should I recharge the battery pack? Recharge the battery pack when: ❑ The battery pack is running out of power and both the charge and power indicator lights blink. ❑ You have not used the battery pack for an extended period of time. When should I replace the battery pack? If the battery pack quickly runs out of power after being fully charged, it may be reaching the end of its life and should be replaced. Should I be concerned that the installed battery pack is warm? No, it is normal for the battery pack to be warm while it is powering your computer.