Views
4 months ago

Sony HDR-AS30VR - HDR-AS30VR Guide pratique Anglais

Sony HDR-AS30VR - HDR-AS30VR Guide pratique Anglais

Settings Search Notes

Settings Search Notes • The Flat Adhesive Mount and Curved Adhesive Mount cannot be used again once they are detached from the location surface. • When detaching, peel off slowly. If peeled off forcibly, the surface on which the mount is fixed might be damaged. • Before attaching, check the surface of the item to be used. If it is dirty, or dust, moisture or oily substances are attached, adhesive strength may be impaired and the item could detach with slight impact. • Use the appropriate Adhesive Mount (flat or curved) for the surface where the camera will be located. If the mount is not suitable for the surface, it may detach by slight impact. • Thread a suitable cord through the attachment hole of the Waterproof Case, then attach the cord to an item you intend to use with the camera. • Before use, confirm that the screw hole on the Attachment Buckle is not loose, and the flat or curved Adhesive Mount is securely attached to the surface. Table of contents Operation Search Index 40 GB

Shooting About the b REC HOLD switch The b REC HOLD switch can prevent accidental operation. Slide the b REC HOLD switch in the direction of b to lock. To release the lock, slide it in the opposite direction of b. • Before recording, release the lock. • If you lock the camera while recording, the recording state will be kept*. • If you lock the camera after you stop recording, the stopped state will be kept*. * Release the lock to change the setting. REC button REC/access lamp Display Table of contents Operation Search b REC HOLD switch Settings Search Movie mode 1 Turn on the power, then press NEXT button to display [MOVIE]. 2 Press the REC button to start shooting. 3 Press the REC button again to stop shooting. Photo mode Index 1 Turn on the power, then press NEXT button to display [PHOTO]. 2 Press the REC button to start shooting. Interval photo recording mode After you start shooting, the camera records still images at regular intervals until you stop shooting. 1 Turn on the power, then press NEXT button to display [INTVL]. 2 Press the REC button to start shooting. 3 Press the REC button again to stop shooting. Notes • If the shooting mode is changed, the mode set when the camera is turned off will be resumed when the camera is turned on the next time. Continued r 41 GB