Views
8 months ago

Sony VPCYB3Q1R - VPCYB3Q1R Mode d'emploi Anglais

Sony VPCYB3Q1R - VPCYB3Q1R Mode d'emploi Anglais

Using Peripheral Devices

Using Peripheral Devices > Connecting an External Display n 66 N ✍ See the manual that came with your TV for more information on installation and use. The HDMI cable carries both video and audio signals. To connect a high-quality digital sound output device between your computer and a TV You can connect a high-quality home theater receiver or other surround sound decoder devices between your computer and TV using an HDMI connection. ! Before connecting the device to the computer, make sure the HDMI connection has been set up between the TV and the home theater receiver or surround sound decoder device first. To hear sound from the device connected to the HDMI output port, you need to change the device for sound output. For detailed instructions, see How do I change the sound output device? (page 134). 1 Turn on the TV and set its input to the HDMI input. 2 Turn on the home theater receiver or surround sound decoder device and set its input to the HDMI input. 3 Plug one end of an HDMI cable to the HDMI input port on the home theater receiver or surround sound decoder device and the other end to the HDMI output port on the computer. ✍ You can adjust the screen resolution of the connected TV with your computer. See Why doesn't my screen display a video? (page 125) for more information. With the HDMI connection, the volume can be adjusted by the connected audio device only. Your computer has no control over the output volume of any connected devices.

Using Peripheral Devices > Selecting Display Modes n 67 N Selecting Display Modes When an external display is connected, you can select either your computer screen or the connected display to use as the primary monitor. ✍ You may not be able to display the same content on your computer screen and the external display or projector at the same time, depending on the type of your external display or projector. Turn on the external display before turning on your computer. To select a display mode with the Fn+F7 keys You can select a display mode with the Fn+F7 keys. See Combinations and Functions with the Fn Key (page 30) for more information. To select a display mode from the display settings 1 Right-click on the desktop and select Screen resolution. 2 Click the drop-down list next to Multiple Displays, select your desired setting, and then click OK.