11.04.2018 Views

Sony CDX-G1102U - CDX-G1102U Mode d'emploi Anglais

Sony CDX-G1102U - CDX-G1102U Mode d'emploi Anglais

Sony CDX-G1102U - CDX-G1102U Mode d'emploi Anglais

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Making connections<br />

If you have a power antenna (aerial) without a relay<br />

box, connecting this unit with the supplied power<br />

supply lead may damage the antenna (aerial).<br />

To the car’s speaker connector<br />

Memory hold connection<br />

When the yellow power supply lead is connected,<br />

power will always be supplied to the memory circuit<br />

even when the ignition switch is turned off.<br />

Speaker connection<br />

Before connecting the speakers, turn the unit off.<br />

Use speakers with an impedance of 4 to 8 ohms,<br />

and with adequate power handling capacities to<br />

avoid damage.<br />

1<br />

Rear speaker<br />

Purple<br />

2 (right)<br />

Purple/black<br />

striped<br />

3 Front speaker Gray<br />

4 (right)<br />

Gray/black striped<br />

5<br />

Front speaker<br />

White<br />

6 (left)<br />

White/black<br />

striped<br />

7<br />

Rear speaker<br />

Green<br />

8 (left)<br />

Green/black<br />

striped<br />

To the car’s power connector<br />

Power connection diagram<br />

Make sure your car’s auxiliary power connector, and<br />

match the connections of cords correctly<br />

depending on the car.<br />

Auxiliary power connector<br />

Common connection<br />

Red<br />

Red<br />

Yellow<br />

Yellow<br />

12<br />

continuous power<br />

supply<br />

Yellow<br />

13<br />

power antenna (aerial) /<br />

power amplifier control Blue/white striped<br />

(REM OUT)<br />

15 switched power supply Red<br />

16 ground (earth) Black<br />

Subwoofer Easy Connection<br />

You can use a subwoofer without a power amplifier<br />

when it is connected to a rear speaker cord.<br />

Front speaker<br />

Subwoofer<br />

Notes<br />

Preparation of the rear speaker cords is required.<br />

Use a subwoofer with an impedance of 4 to 8 ohms,<br />

and with adequate power handling capacities to<br />

avoid damage.<br />

12<br />

continuous power<br />

supply<br />

Yellow<br />

15 switched power supply Red<br />

When the positions of the red and yellow<br />

leads are inverted<br />

Red<br />

Red<br />

Yellow<br />

Yellow<br />

12 switched power supply Yellow<br />

15<br />

continuous power<br />

supply<br />

Red<br />

When the car without ACC position<br />

Red<br />

Red<br />

Yellow<br />

Yellow<br />

16GB

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!