Views
2 months ago

Sony VPCCA3X1R - VPCCA3X1R Mode d'emploi Anglais

Sony VPCCA3X1R - VPCCA3X1R Mode d'emploi Anglais

Troubleshooting >

Troubleshooting > Peripherals n160 N Peripherals What should I do if I cannot connect a USB device? ❑ ❑ ❑ ❑ ❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to an AC outlet. Try using another USB port on your computer. The driver software could be installed to the specific port you used the first time you connected the device. See the manual that came with your USB device for more information. You may need to install software before you connect the device. Try connecting a simple, low-powered device such as a mouse to test if the port is working at all. USB hubs may prevent a device from working because of a power distribution failure. We recommend you connect the device directly to your computer without a hub.

About the International ENERGY STAR(R) Program > n161 N About the International ENERGY STAR(R) Program The following information is applicable to ENERGY STAR qualified products only. As an ENERGY STAR Partner, Sony confirmed that this product meets the ENERGY STAR standards for energy efficiency. The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. For detailed information on the ENERGY STAR Program, visit the following web sites: ❑ http://www.energystar.gov (USA) ❑ http://www.eu-energystar.org (Europe) This computer is designed in compliance with the ENERGY STAR standards and delivered with the following power saving settings that apply to the computer running on AC power: ❑ The LCD backlight is turned off automatically after no more than 15 minutes of inactivity. ❑ The computer enters Sleep mode automatically after no more than 30 minutes of inactivity. Press any key to bring the computer back into Normal mode.