Sony TA-VE800G - TA-VE800G Consignes d’utilisation
Sony TA-VE800G - TA-VE800G Consignes d’utilisation
Sony TA-VE800G - TA-VE800G Consignes d’utilisation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Preparing and Using the Remote<br />
Registering Audio/Video<br />
Equipment<br />
Registering <strong>Sony</strong> audio/video equipment<br />
Amplifier jacks Equipment to be connected<br />
VIDEO 1<br />
<strong>Sony</strong> VTR 3 (VHS)<br />
VIDEO 2<br />
<strong>Sony</strong> VTR 1 (BE<strong>TA</strong>)<br />
VIDEO 3<br />
<strong>Sony</strong> VTR 2 (8 mm)<br />
LD<br />
<strong>Sony</strong> LD player<br />
SATL<br />
<strong>Sony</strong> Satellite decoder<br />
TUNER<br />
<strong>Sony</strong> Tuner<br />
DAT/MD<br />
<strong>Sony</strong> DAT deck<br />
CD <strong>Sony</strong> CD player (CD 1)<br />
<strong>TA</strong>PE<br />
<strong>Sony</strong> Tape deck<br />
MONITOR<br />
<strong>Sony</strong> TV<br />
If your <strong>Sony</strong> audio and video equipment can be<br />
controlled by an infrared remote, simply connect them<br />
to the jacks shown on the following table, registration<br />
is unnecessary.<br />
The following cases require registration of <strong>Sony</strong> products<br />
• When connecting a <strong>Sony</strong> MD deck to the DAT/MD<br />
jacks.<br />
• When connecting a <strong>Sony</strong> audio product with<br />
CONTROL-A1 compatibility.<br />
• When connecting a <strong>Sony</strong> product to jacks other than<br />
those specified in the previous table (e.g., when<br />
connecting a <strong>Sony</strong> LD player to the VIDEO 3 jacks).<br />
• When exchanging non-<strong>Sony</strong> audio or video<br />
equipment with a <strong>Sony</strong> product.<br />
Notes<br />
• If your VCR has a COMMAND CODE selector switch (for<br />
VTR1, VTR2, or VTR3), set the switch to the applicable<br />
setting.<br />
• If your CD changer has a COMMAND MODE selector<br />
switch (for CD 1, CD 2, or CD 3), normally it should be set<br />
to “CD 1”. However, if your CD changer has VIDEO OUT<br />
terminals, set the command mode to “CD 2” or “CD 3”<br />
(“CD 3” should only be used when making CONTROL-A1<br />
connections).<br />
Registering non-<strong>Sony</strong> audio/video<br />
equipment<br />
If you connect audio or video equipment made by<br />
another manufacturer, you must programme the IR<br />
codes used by the equipment before you can control it<br />
through the amplifier.<br />
You can programme up to 120 IR codes, including user<br />
IR codes; however, depending on the type of codes<br />
recorded, the maximum limit may be less than 100. It<br />
may be difficult or impossible to programme up to 120<br />
codes under the following conditions:<br />
• When programming IR codes of special remotes such<br />
as card type remotes, or remotes for household<br />
appliances such as air conditioners.<br />
• When programming from remotes with weak<br />
batteries.<br />
• When programming IR codes that have been<br />
programmed to a programmable remote (i.e., any IR<br />
code not originally supplied in the respective remote).<br />
Registration<br />
1 Click FUNCTION in the main menu.<br />
S<br />
O<br />
U<br />
N<br />
D<br />
2 Click IR SET.<br />
FUNCTION SELECT<br />
VIDEO 1 DAT/MD<br />
VIDEO 2<br />
CD<br />
VIDEO 3<br />
TUNER<br />
L D<br />
PHONO<br />
SATL<br />
<strong>TA</strong>PE<br />
MACRO 1 MACRO 2<br />
IR SET<br />
FUNCTION<br />
3 Click the appropriate function.<br />
VOL<br />
+<br />
–<br />
SUB USER<br />
0 ( ) p P = +<br />
IR CODE SETTING<br />
EXIT<br />
VIDEO 1 <strong>Sony</strong> VTR3<br />
VIDEO 2 <strong>Sony</strong> VTR1<br />
VIDEO 3 <strong>Sony</strong> VTR2<br />
LD<br />
<strong>Sony</strong> LD<br />
SATL<br />
<strong>Sony</strong> DBS<br />
DAT/MD <strong>Sony</strong> DAT<br />
CD <strong>Sony</strong> CD1<br />
<strong>TA</strong>PE <strong>Sony</strong> <strong>TA</strong>PE<br />
TUNER <strong>Sony</strong> TUNER<br />
RETURN<br />
EXIT<br />
ALL<br />
OFF
Change language