Views
5 months ago

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

Notes • The setting is

Notes • The setting is fixed to [Off] when [Sunset], [Night View], [Night Portrait], or [Handheld Twilight] is selected in Scene Selection. The setting is fixed to [Auto] when other modes are selected in Scene Selection. • When shooting with the D-Range optimizer, the image may be noisy. Select the proper level by checking the recorded image, especially when you enhance the effect. Compensating automatically with rich gradation (Auto High Dynamic Range) 1 D-RANGE button t (Auto HDR) 2 Select an optimal level with b/B on the control button. (Auto Exposure Diff.) (Exposure Difference Level)* Corrects the exposure difference automatically. Sets the exposure difference, based on the contrast of the subject. Select the optimal level between 1.0Ev (weak) and 6.0Ev (strong). For example: When 2.0Ev is selected, three images are overlaid: an image with –1.0Ev, an image with the correct exposure, and an image with +1.0Ev. * _Ev displayed with is the step currently selected. Shooting technique • Since the shutter is released three times for one shot, be careful about the following: – Use this function when the subject is motionless or does not blink. – Do not recompose. Notes • You cannot use this function on RAW images. • When the exposure mode is set to AUTO, AUTO+, Sweep Panorama, or Scene Selection, you cannot select [Auto HDR]. 108

• You cannot select [Auto HDR] during Smile Shutter. If you turn on the Smile Shutter function with [Auto HDR] selected, the camera will temporarily use with the DRO setting. • You cannot start the next shoot until the capture process is completed after you shoot. • You may not obtain a desired effect depending on the luminance difference of a subject and the shooting conditions. • When the flash is used, this function has little effect. • When the contrast of the scene is low or when camera shake or subject blur is occurred, you may not obtain good HDR images. If the camera has detected a problem, is indicated on the recorded image to inform you of this situation. Shoot again, as necessary, paying attention to the contrast or blur. Using the shooting function 109